Clarification from the agency

Current Federal employees with competitive status or other eligibility; Former Federal employees with reinstatement eligibility; CTAP/ICTAP eligibles; Veterans with VOW, VEOA, or 30% disability; Military Spouses; Individuals with Disabilities Schedule A; Peace Corps, Vista (AmeriCorps) eligibles; Those eligible under an OPM interchange agreement or other special appointing authority.

As an Interdisciplinary Engineer, you will:

• Develop protection schemes; prepare and reviews settings for protective relays; provide engineering analysis of power system disturbance reports and recommends corrective action.
• Provide necessary coordination with other organization segments.
• Perform system studies to determine short circuit currents, system voltage levels, power system impedances, transient phenomena, and other power system conditions.
• Recommend overall ratings for major power system equipment and specialized equipment, including phase shifting transformers, series capacitor banks, static var systems, and other power electronic devices.
• Develop and review WAPA's protective relaying philosophies and practices.
• Prepare and recommend design standards, guidelines, and procedures concerning control and protection applications for WAPA and other industry groups.
• Provide technical direction and guidance to other employees as assigned.
• Provide technical expertise and coordination assistance to WAPA Regional maintenance offices by analyzing and resolving substation operational and maintenance problems.

Conditions of employment

• Must be a U.S. Citizen or National.
• This employer participates in the e-Verify program.
• Males born after 12/31/1959 must be registered for Selective Service.
• Suitable for Federal employment, as determined by a background investigation.
• May be required to successfully complete a probationary/trial period. Employees serving on a probationary or trial period may be terminated at any time during the probationary or trial period for performance, conduct, or business-related reasons in the interest of Federal service.
• Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications.
• In accordance with Executive Order 14170, applicants are encouraged to respond to the four short, free-response, essay questions in the questionnaire. Answers to these questions are not scored or rated. Your answers will be reviewed by the hiring manager and agency leadership if you are referred for selection consideration.
• Security clearance and associated requirements - Moderate Risk.
• When in the field, the incumbent is required to wear appropriate Personal Protective Equipment (PPE). Additionally, Arc Rated protective clothing is required when in proximity to exposed energized circuits.
• This position requires the ability to operate a Government vehicle. The incumbent must be at least 18 years of age, able to obtain and maintain a Defensive Driver's certification and have a valid state driver's license. Defensive Driver's Training will be completed upon employment.

Qualifications

This position has an Individual Occupational Requirement (IOR) for all positions in the 0800 Series:https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Basic Requirements: You must meet one of the following:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

In addition to meeting the Individual Occupational Requirements for the 0850/0855 Series, applicants must meet the specialized experience below.

Specialized Experience:

To qualify for the GS12 - Applicants must have one (1) year (52 weeks) of specialized experience, equivalent to the next lower grade level (GS11) in the federal service in ALL of the following areas:

• Analyzing short circuit currents, system voltage levels, power system impedances, transient phenomena, or other power system conditions.

To qualify for the GS13 - Applicants must have one (1) year (52 weeks) of specialized experience, equivalent to the next lower grade level (GS12) in the federal service in ALL of the following areas:

• Analyzing short circuit currents, system voltage levels, power system impedances, transient phenomena, or other power system conditions; AND
• Developing and analyzing protective relaying schemes.

"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Time-in-Grade: Current career or career-conditional GS employees of the Federal government, or former career or career-conditional GS employees, who have a break in service of less than one year, are required to meet the time-in-grade restriction of one year of Federal experience at the next lower grade, with few exceptions outlined in 5 CFR 300.603(b). Note: Time-In-Grade requirements also apply to current career or career-conditional federal employees applying for a Veterans Employment Opportunities Act of 1998 (VEOA) appointment.

Physical Demands: The work is mainly sedentary, but there is some walking, climbing, and bending during field trips and when testing.

Work Environment: Most work is performed in an office setting, although occasional field work will be performed outdoors. Work may occasionally be performed at HV and EHV substation/transmission line sites involving hazards requiring special safety precautions around energized circuits and
equipment.

Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

• Electrical Engineering
• Modeling and Simulation
• Technical Competence

All qualified Non-competitive applicants and the best qualified Merit Promotion and VEOA applicants will be referred to the hiring manager for consideration.

Career Transition Assistance Programs: To receive selection priority for this position, you must: 1) meet the eligibility criteria; and 2) be rated "well-qualified".

You must meet all qualifications and eligibility requirements by the closing date (04/06/2026) of this announcement.

To preview the Assessment Questionnaire, click https://apply.usastaffing.gov/ViewQuestionnaire/12917614.

To apply for this position, you MUST provide a complete application package which includes:

• Your two (2) page RESUMEshowing all relevant work experience (paid and unpaid) including: duties performed; full name and address of the each employer; start and end dates (month/day/year); work schedule (part-time, full-time, number of hours if intermittent); salary; and any completed education and training (program title, subject area, number of hours completed, and completion date).
• Transcripts, if specific educational requirements are indicated in this job announcement. Unofficial transcripts or any report listing institution, course title, credits earned (semester or quarter hour) and final grade is acceptable. It is your responsibility to provide adequate proof that you meet the educational requirements.

Submit one or more of the following to support your eligibility(s) to apply to this job announcement:

• Current and former Federal employees: Most recent non-award SF-50 (Standard Form 50 - Notice of Personnel Action). To properly verify status eligibility, your SF-50 must show the following. If you do not submit an appropriate SF-50, we cannot verify your status eligibility.
  • Full position title;
  • appointment type;
  • occupational series;
  • pay plan, grade, and step;
  • tenure code; and
  • service computation date (SCD).
  • If your current position SF50 does not indicate you have competitive service status or does not reflect the pay plan and grade of the highest position you have held in the competitive service, in addition to your current SF50, you must provide your previous SF-50s that provide the proof of competitive status and highest grade held on a permanent basis. . If you do not submit an appropriate SF-50, we cannot verify your status eligibility.
• Veterans: DD-214 Member Copy 4 showing type of discharge/character of service; current active duty members- certification of expected discharge or release from active duty under honorable conditions dated within 120 days; SF-15 Form and related documentation; VA letter. For more information visit the USAJOBS Help Center & OPM CHCOC website for VOW information.
• Individuals with Disabilities: Schedule A letter from a physician, local, state or federal rehabilitation office citing your eligibility under 5 CFR 213.3102 (u). For more information visit the USAJOBS Help Center.
• Certain Military Spouses: Permanent Change of Station (PCS) orders authorizing you to accompany the Military member to the new duty permanent station; OR verification of the member's 100% disability (VA Letter); and/or verification of the member's death while on active duty (DD-1300 and Death Certificate) AND verification of the marriage to the service member (i.e., a marriage license or other legal documentation verifying marriage). For more information visit the USAJOBS Help Center.
• Other non-competitive or special appointing authorities: provide documentation which supports your eligibility.
• Career Transition Assistance Program/Interagency Career Transition Assistance Program documentation, if applicable(e.g., Certification of Expected Separation, Reduction-In-Force Separation Notice, or Notice of Proposed Removal; SF-50 that documents the RIF separation action; and most recent performance appraisal.) For more information see the OPM Guide to Career Transition.

Failure to submit any of the above mentioned required documents may result in loss of consideration due to an incomplete application package. It is your responsibility to ensure all required documents have been submitted.

Next steps