Requirements
Conditions of Employment
When you apply you will be asked a series of questions to determine your eligibility for employment and your qualification for this position specifically.
You must answer all of these questions completely and truthfully.
Key Requirements:
- You must be a United States Citizen.
- This employer participates in the e-Verify program.
- Males must abide by Selective Service registration requirements.
- This position does not support remote work. You will be required to report physically to the official reporting worksite as specified by the supervisor, but no less than 3 days per pay period.
- A valid state driver's license is required.
- Occasional travel may be required.
- Operation of government owned or leased motor vehicles in the performance of assignments.
- Required to maintain CPR/First Aid/AED certified in accordance with BPA Safety Policy.
- Required to maintain Arc Flash certified in accordance with BPA Safety Policy.
- Occasionally may be required to wear PPE, including boots, arc-flash rated clothing, hard hat, eye protection, and gloves.
- A pre-employment physical is required.
- Selectee will be required to complete the Office of Government Ethics Standard of Confidential Financial Disclosure Report (OFGE450e) within 30 days of employment and annually.
- The salary is based on a Special Rate Table, Number 0754 and 0755: https://apps.opm.gov/SpecialRates/
Qualifications
BASIC REQUIREMENT:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
-OR-
B. Combination of Education and Experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR-
- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. -OR-
- Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. -OR-
- Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
For more information on how to meet the Basic Requirements please visit: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
SPECIALIZED EXPERIENCE REQUIREMENTS:
A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level, GS-12, in the Federal service.
Specialized Experience for this position is defined as : Experience in advanced engineering theories, principles, concepts, standards, and methods sufficient to serve as the technical authority and project engineer with 1) responsibility for analysis of all structures on an organization's utilities and supporting system; and 2) reviewing plans, specifications, or cost estimates on technical projects for accuracy and ensuring goals are met on all project engineering matters related to facility utilities and related systems.
"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
CTAP candidates: To be considered "well qualified" you must meet all of the requirements as described in this section.
You must meet all qualifications and eligibility requirements by the closing date of this announcement.
Education
This vacancy has a positive education requirement. In order to be rated as qualified, you must provide copies of your college transcripts. Education must be obtained from an accredited institution recognized by the U.S. Department of Education. See Department of Education Accreditation Search to verify school accreditation.
Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.DO NOT email or mail in any of your application documents. Documents will not be accepted outside of the online application system.
Failure to provide copies of your college transcripts may result in a rating of "Ineligible".
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
The Department of Energy uses an application tracking system to evaluate the responses you provide in the applicant assessment questionnaire to place you into an initial quality category via OPM's Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified. Then, the HR Office and/or Subject Matter Expert (SME) will conduct a quality review of your application and supporting documentation to ensure you have been placed into the appropriate quality category.
Your application is rated based on the extent and quality of your experience, education (when applicable), and training as described in your resume and applicant assessment. Your credentials are measured against the established duties of the position at the grade level(s) being advertised.
If you are eligible for career transition assistance plans such as ICTAP or CTAP, you must meet the definition of "well qualified" which is defined as scoring in the Well Qualified category (or higher).
If you are a Veteran Preference eligible candidate, you will be listed at the top of whichever quality category your rating places you in. CP/CPS veterans are placed at the top of the highest category for all positions except professional and scientific positions at GS-9 and higher.
If your resume is incomplete or does not support the responses you provided in your online questionnaire, or if you fail to submit all required documentation before the vacancy closes, you may be rated 'ineligible', 'not qualified', or your score may be adjusted accordingly
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, your resume and supporting documentation will be used to determine whether you meet the job qualifications. If you are minimally qualified for this job, your responses to the self-assessment questions (True/False, Yes/ No, Multiple Choice questions) will be evaluated and you will be placed into one of three pre-defined quality categories under Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified. If you rate yourself higher than is supported by your application materials, your responses may be adjusted and/or you may be excluded from consideration for this job.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
- Mechanical Engineering
- Oral Communication
- Partnering
- Planning and Evaluating
- Project Management
Application of Veterans' Preference: If you are a preference eligible candidate, you will be listed at the top of whichever quality category your rating places you in. CP/CPS veterans are placed at the top of the highest category for all positions except professional and scientific positions at GS-9 and higher.
Career Transition Assistance Programs: To receive selection priority for this position, you must: 1) meet the eligibility criteria; and 2) be rated "well-qualified", which is defined as scoring 85.0 or higher.
You must meet all qualifications and eligibility requirements by the closing date (01/31/2025) of this announcement.
To preview the Assessment Questionnaire, click
https://apply.usastaffing.gov/ViewQuestionnaire/12666734
How to Apply
Please read the entire announcement and all the instructions before you begin an application. To apply for this position, you must complete the initial online application, to include submission of the required documentation specified in the Required Documents section. A complete application package must be submitted by 11:59 PM (EST) on the announcement closing date to receive consideration.
The application process is as follows:
- You must have a login.gov account to sign into USAJOBS: https://www.usajobs.gov/Help/how-to/account/.
- To begin the application process in USAJOBS, click the Apply Online button.
- Answer the questions presented in the application and attach all required and supporting documentation.
- You must click the Submit Application button prior to 11:59 pm (ET) on the announcement closing date.
You may update your application, including supporting documentation, at any time during the announcement open period by returning to your USAJOBS account, select Update Application:
https://my.usajobs.gov/Account/Login. This option will no longer be available once the announcement has closed.
To verify the status of your application, during and after the announcement open period, log into your USAJOBS account; applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each application status means, visit:
https://www.usajobs.gov/Help/how-to/application/status/.
If you need help with login.gov or USAJOBS (e.g., account access, Resume Builder) visit the USAJOBS Help Center:
https://www.usajobs.gov/Help/
If you experience difficulty applying on USAJOBS, after clicking the Apply Online button, or you are experiencing a significant hardship hindering your ability to apply online, the Agency Contact listed in the announcement can assist you during normal business hours. If you receive any system error messages, take screenshots if possible, to aid technical support.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. The status of your application will be updated in USAJOBS as it is evaluated.
You can check the status by logging into USAJOBS. You may also sign up to receive automatic emails anytime the status of your application changes by logging into your USAJobs Account and editing the Notification Settings.
You will be contacted directly if an interview is required.
Please check that your USAJOBS profile contact information is current and correct each time you apply to a job--this will ensure we are able to contact you as quickly as possible.
In addition to changing your status online, we will send you e-mail notifications at each major step in the process, to include: application received, eligible or not eligible, referred or not referred, selected or not selected.