LOCKSMITH Job in Marine Corps Air Station Miramar, CA

Vacancy No. DE-12602333-25-PLD Department Naval Facilities Engineering Systems Command
Salary $29.27 to $34.08 Grade 9 to 9
Perm/Temp Permanent FT/PT Full-time
Open Date 11/8/2024 Close Date 12/6/2024
Job Link Apply Online Who may apply Public
Locations:
Marine Corps Air Station Miramar, CA


Summary

This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

This job is open to

Clarification from the agency

U.S. Citizens

Duties

  • You will repair, overhaul, modify, and install locking devices which make up security or surveillance systems.
  • You will use blueprints, specifications, and sketches to plan and determine the work sequence for lock repairs.
  • You will use tools and equipment of the locksmith trade to install locks throughout an organization.
  • You will troubleshoot commercially manufactured locking devices to determine repair or replacement requirements.

Requirements

Conditions of Employment

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • This is a bargaining unit position.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • You will be required to obtain and maintain a current valid United States driver’s license.
  • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  • You will be required to successfully complete a pre-appointment physical examination.
  • You may be required to travel away from normal duty station and must be able to travel at least 5 days per month.
  • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.

Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.

This job has a screen-out element which will be used to determine minimum eligibility for this job. The Screen-out Element for this position is: Ability to perform duties of a LOCKSMITH without more than normal supervision as demonstrated by: 1) Perform a full repair cycle of locating malfunction, disassembly, repair, cleaning, reassembly, and reinstallation of a wide variety of commercially manufactured locking devices; 2) Determining the work sequence and select hand and power tools (e.g. files, picks, tweezers, tension wrenches, grinders, buffers, stamping machines, electric drills, soldering, irons, brazing torches, bench lathes and drill presses) to repair locking mechanisms; 3) Plan techniques to be used and apply judgement in the selection of tools and accepted trade practices to troubleshoot and neutralize locks according to appropriate guidelines, manufacturer drawings, diagrams, and technical manuals.

NOTE: This information must be supported in your resume to be considered for the position.

Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=WG-4800

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

This job does not have an education qualification requirement.

Additional information

This announcement uses the Defense Industrial Base, Major Range and Test Facilities direct hire authority to recruit and appoint qualified candidates to certain positions in the competitive service.

This position is covered by the Department of Defense Priority Placement Program.

A 40-hour work week is typical for this position.

This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
The employee may be required to work in shifts.

The employee may be required to work regularly scheduled overtime or overtime on an
emergency call-back basis.

Must be able to obtain and maintain continuous eligibility for Secret clearance and may be required to obtain and maintain a Top Secret clearance and approval for access to Sensitive Compartmented Information (SCI)

Incumbent may be required to receive certification through the DoD Lock Program.

Should work be assigned that requires special certification or licensing to perform the work or to use specialized tools or equipment, the incumbent will be required to obtain such certification or licensing and maintain any associated qualification requirements.

You may be required to obtain and maintain a current Respirator certification.

Incumbent may be required to obtain licenses for the operation of forklift, high lift and/or construction equipment.
May be assigned a truck stocked with controlled inventory and consumable materials.

Recruitment incentives may be authorized to eligible new hires.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.

A relocation incentive may be authorized.

Several vacancies may be filled.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf.

Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.

PHYSICAL EFFORT: May be required to lift items weighing approximately 15 pounds. May be required to lift items weighing up to 50 pounds and heavier weights with assistance. The work may require standing, stooping, bending, kneeling and working in awkward positions when installing and opening locks and emergency exit hardware on-site.

WORKING CONDITIONS: Work is normally done inside. Occasionally work is done outside in bad weather or in areas that are drafty and poorly lighted. May be exposed to the possibility of cuts, scrapes and bruises or burns while using acetylene torches, brazing torches, and soldering irons.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

As vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyer. You will be rated based on the information provided in your resume, along with your supporting documentation.

If selected, you may be required to provide additional supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All qualification requirements must be met before being considered for any vacancies.

Required Documents

A complete resume is required. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume, but it is acceptable to provide elsewhere in your application package: employer's name, starting and end dates (Mo/Yr), hours per week, and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume.

Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package.

Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified.

Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor

Are you a disabled veteran or claiming 10-point veterans' preference?
If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.

You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf.

Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).

Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents contain personal information such as SSN and DOB and some documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove said personal information before you submit your application. You must provide an un-sanitized version of the documents if you are selected.

How to Apply

Interested Applicants must submit resumes/application packages to:

NAVFAC_SW_Jobs_UD@us.navy.mil

Email MUST include ANNOUNCEMENT NUMBER (DE-12602333-25-PLD) in the subject line of the email.

Facsimile applications will not be considered.

All resumes/applications must be received no later than the close date of this flyer.

It is the applicant's responsibility to verify that all information in their resume and documents, are received, legible, and accurate. HR will not modify answers/documents submitted by an applicant.

Failure to submit a complete application package will result in an ineligible rating and loss of consideration.

Agency contact information

NAVFAC Southwest HRO
Address
NAVFAC SOUTHWEST
750 Pacific Hwy
San Diego, CA 92132
US
Learn more about this agency

Next steps

Qualified applicants will be referred to the hiring manager. The selecting official may choose to conduct interviews.

Our evaluation will be based on the information you provide. You should expect that we will verify performance, suitability, and security information and take that information into account in making employment offers.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2024, exclusive of U. S. government job opportunity announcements