Duties
Interprets construction and project renovation blueprints, prepares layouts and sketches, prepares purchase requests for tools, material and equipment needed to ensure. Work must be accurate and to specifications according to job requirements.
Performs work in at least two of the following trades in the maintenance and repair of grounds, exterior structures, buildings and related fixtures and utilities from initial layout completion.
Plumbing: Installs, modifies and repairs new and existing utility, supply and disposal systems and equipment such as sewage, water, oil and gas distribution systems, water closets, tube, fire sprinkler systems and showers. Works from building plans, blueprints and sketches.
Carpentry: Uses skilled techniques to construct, install, repair and modify wood and wood substitute structures and items requiring close tolerance fit and structural soundness. Assembles items using a variety of joining techniques and are skilled in the operation of general and precision carpentry and wood working equipment and are able to produce finished products with precise fits, accurate dimensions and acceptable appearance.
Painting: Performs special coating methods such as marbling and graining using coating materials prepared in special as well as common ways and by applying coating techniques that ensures surfaces have a smooth-textured and decorative appearance and meet thickness and level requirements.
Electrical: Installs, modifies, repairs, maintains, troubleshoots, tests and loads new and existing electrical lines, circuits, systems, associated fixtures, controls and equipment at a skilled journeyman level. Works from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, replacement, type, size, gauge, balance, lad, continuity and safe operation of electrical lines and lighting, circuits, systems, equipment and controls.
Determines and places distribution panels, junction boxes, fittings and connections and installs wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices. Plans and lays out work, tracing hard to locate defects or problems and completing repairs and installations with little or no technical advice using a wide variety of test equipment such as voltmeter, ammeter, wattmeter and ohmmeter.
Masonry: Plans and lays out work to be done for repair, alteration or construction of exterior and interior surfaces and structures built of brick, block , glass block, terra cotta, stone and various artificial and nature stone. Cuts and shapes materials used for constructing and repairing window and door openings and corners. Ensures courses are laid evenly and that completed work blends with existing brickwork and corners. Ensures courses are laid evenly and that completed work blends with existing brickwork.
Observes required safety, sanitation and hazardous waste disposal rules and regulations. Operate vehicle to transport tools and materials to work site.
Performs other related duties as assigned.
Requirements
Conditions of employment
- Starting May 7, 2025, non-affiliated individuals requesting access will need a REAL ID-compliant driver's license or another acceptable form of identification to access CNRMA Installations. (review required documents section for more information.)
- Must pass all applicable records and background check.
- Must successfully pass the E-Verify employment verification check. Any discrepancies must be resolved as a condition of employment.
Qualifications
Resumes must include information which demonstrates experience and knowledge, skills, and ability (KSAs) as they relate to this position. Applicants are encouraged to be clear and specific when describing their experience level and KSAs.A qualified candidate possess the following:
A minimum two years documented general experience, with two years documented specialized experience in the applicable combination of trades noted herein sufficient to perform the duties of the position. Ability to read, write, and follow appropriate plans and specifications. Ability to communicate verbally and to perform all necessary math computations and measurements.
Plumbing Work: Knowledge of how various supply, disposal and utility systems and equipment are installed and operated. Knowledge to plan and lay out the installation and modification of various system and equipment; to interpret and apply building plane and blueprints; to use shop mathematics; and lay out such things as angles, arc and circles. Skill in the use of any of the accepted trade methods and techniques and in the use of tools and equipment.
Carpentry and Paint: Must be knowledgeable in shop mathematics and possess the skill to compute complex and exact projects with features such as arcs, tangents and circles. Must have the ability to read, interpret, and apply building plans, specifications, blueprints and sketches of all complexity. Must have the knowledge of the basic components of a structure and understand the purpose of the components as they relate to the complete structure so as to insure strength, support and fit of assemblies. Must be skilled in the use of a variety of hand and power shop tools of the carpentry trade to include set up and adjustment of tools to accomplish all tasks. Must be knowledgeable of safety measures when using tools and must possess the skill to maintain the tools to include sharpening saws, tools, and accessories. Must have knowledge of standard surface preparation and coating methods and techniques. Must have skill in the use of such tools and equipment as scrapers, wire brushes, putty knives, sandpaper, paint brushes, rollers, spray guns, etc.
Performance of carpentry duties requires a thorough knowledge of wood and wood substitute materials and construction techniques. Must be able to produce finished products with precise fits, accurate dimensions and acceptable appearance. Must be able to use advanced shop mathematics to plan, compute and lay out complex and exact projects with features such as arcs, tangents and circles. Must have the ability to read, interpret, and apply building plans, specifications, blueprints and sketches of all complexity. Must have the knowledge of the basic components of a structure and understand the purpose of the components as they relate to the complete structure so as to insure strength, support and fit of assemblies. Must be skilled in the use of a variety of general and precision carpentry equipment, to include set up and adjustment of tools to accomplish all tasks. Must be knowledgeable of safety measures when using tools and must possess the skill to maintain the tools to include sharpening saws, tools, and accessories.
Electrical Work: Knowledge of the makeup, operation, and installation of a variety of electrical systems, circuits, equipment, and controls. Knowledge of how various circuits, equipment, and controls operate fit and work together. Knowledge of the various gauges, sizes, and types of wire, conduit, couplings, fittings, relays, boxes, circuit breakers, and other electrical devices. Skill to plan, lay out, and complete the installation, modifications, and repair of various systems, circuits, equipment, and controls such as the routing, placement, balance, load, continuity, and proper and safe operation of circuits and controls, and wiring systems in buildings. Skill to interpret and apply building plans, blueprints, wiring diagram, and engineering drawings, and use formulas basic to the trade to figure such things as voltage and resistance. Skill in the use of hand tools and a wide variety of test equipment, for example, wire cutters and strippers, drills, soldering irons, screwdrivers, test meters, test lamps, Voltmeters, ammeters, watt meters, and ohmmeters.
Mason: Knowledge of the techniques and procedures of brick, block, and stonework. Has a basic knowledge of the techniques and procedures involved in laying brick, block, and stone in the construction and repair of walkways, veneer walls, and similarly uncomplicated structures. Has ability to use trowel, spirit levels, plumb bobs, air-hammers, and chisels in preparing work surfaces and accomplishing mason tasks. Knowledge of and ability to use the various hand and power tools associated with the occupation.
Education
This position does not have a positive education requirement.
Additional information
Salary is dependent on experience and/or education.
Some positions have special requirements. Selectee may be required to complete a one (1) year probationary period. Participation in Direct Deposit/Electronic Fund Transfer within the first 30 days of employment is required. We utilize E-Verify to confirm selectee's eligibility to work in the United States. Salary is dependent on experience and/or education.
This announcement may be used to fill additional vacancies within 60 days of issuance of selection certificate. For positions requiring travel more than twice per year, selectee may be required to obtain and maintain in good standing a Government-issued Travel Card for official government travel purposes.
Executive Order 12564 requires a Federal workplace free of illegal drugs. According to the Executive Order, all Federal employees are required to remain drug free throughout their employment. Commander, Navy Installations Command is a Drug-Free Federal Workplace. The use of illegal drugs will not be tolerated, and use of or intoxication by illegal drugs will result in penalties up to and including removal from Federal Service.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
The following documents are required at the time of application:
- Resume
- Proof of education/training: if applicable, provide a copy of your awarded/conferred college transcript(s)
- If claiming Department of Defense (DOD) Non-appropriated Fund (NAF) Business Based Action (BBA) priority consideration: provide a copy of the notice of separation
- If claiming Military Spouse Preference: provide a copy of the sponsor's Permanent Change of Station (PCS) orders and a marriage certificate at the time of application
- If claiming Veteran's Preference: provide a copy of your DD-214, Member-4 page and any supporting documentation (SF-15, V.A. disability letter, proof of service, etc.)
- If a current or former Federal Employee: provide a copy of your most recent Personnel Action Report (PAR) or SF-50
Starting May 7, 2025, non-affiliated individuals requesting access will need a REAL ID-compliant driver's license or another acceptable form of identification to access CNRMA Installations. This applies to everyone, including the following: but not all inclusive:
- Vendors
- Dependents aged 18 and older
- Service Providers
- Veterans with service-connected disabilities
- Contractors
- Visitors (includes visitors in same vehicle with CAC holder)
- Transportation services (taxi, limo, ride share)
- Agent, Assist, Aid, Care Giver Letters
- Au Pairs, Child Care Providers
What are acceptable alternative forms of identification for base access? If you don't have a REAL ID-compliant driver's license, you can use one of the following:
- U.S. passport or passport card
- Military ID card (Common Access Card or CAC, DoD retired ID card)
- Permanent resident card (Green Card)
- Transportation Worker Identification Credential (TWIC)
- Enhanced Driver's License (EDL)
- Other forms of identification accepted by the Department of Homeland Security
How can I obtain a REAL ID-compliant license? To obtain a REAL ID-compliant license, you'll need to visit your state's driver's license agency with the following documents:
- Proof of identity (e.g., birth certificate, passport)
- Proof of Social Security number (e.g., Social Security card)
- Two proofs of residency (e.g., utility bills, bank statements)
Please follow the link below for more information in regards to READ ID for base access:
https://cnrma.cnic.navy.mil/Operations-and-Management/Base-Access/REAL-ID-Act/
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.