Duties
The incumbent is responsible for a variety of semi-skilled and skilled tasks related to the operation and maintenance of facilities.
Interprets construction and project renovation blueprints, prepares layouts and sketches, prepares purchase requests for tools, material and equipment needed to ensure. Work must be accurate and to specifications according to job requirements.
Performs work in at least three of the following trades in the maintenance and repair of grounds, exterior structures, buildings and related fixtures and utilities from initial layout to completion:
Plumbing: Makes plumbing repairs to sinks, faucets, commodes, tanks, urinals, P-traps, and shut-off valves that can be accomplished by removing, cleaning, resealing, replacing defective parts or units. Involves installing, modifying, and repairing new and existing utility, supply and disposal systems and equipment, water closets, tubs, fire sprinkler systems, and showers. The incumbent works from building plans, blueprints, slant, slope, fall and proper operation of systems and equipment. Installs, modifies and repairs systems like those described above by locating and tapping main lines, setting up system routes, placing and cutting route openings, placing hangers for proper level and slope, and determining and installing valves, traps, and unions needed for proper operation of systems.
Heating, Ventilation and Air Conditioning (HVAC): Recognizes the cause of faulty equipment and assists making repairs on a variety of HVAC units. Incumbent traces and locates defects to determine the type and extent of repair needed and they plan the work, select the proper tools/testing devices and accomplish repairs according to accepted trade practices.
Electrical: Electrical crew is consulted for unusual or complex electrical work. Repairs are accomplished by removing, replacing, tightening, splicing, soldering and insulating defective wiring, controls, equipment, and fixtures. May install or repair electrical systems incident to he construction or maintenance of a facility.
Carpentry: Uses skilled techniques to construct, install, repair and modify wood and wood substitute structures and items requiring close tolerance fit and structural soundness. Constructs and repairs a wide variety of structural items such as building frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim and miscellaneous items. Assembles items using a variety of joining techniques and are skilled in the operation of general and precision carpentry and wood working equipment and are able to produce finished products with precise fits, accurate dimensions and acceptable appearance.
Painting: Performs special coating methods such as marbling and graining using coating materials prepared in special as well as common ways and by applying coating techniques that ensure surfaces have a smooth-textured and decorative appearance and meet thickness and level requirements.
Observes required safety, sanitation and hazardous waste disposal rules and regulations. Operates vehicle to transport tools and materials to work site.
Performs other related duties as assigned.
Requirements
Conditions of Employment
- Must pass all applicable records and background check.
- Must successfully pass the E-Verify employment verification check. Any discrepancies must be resolved as a condition of employment.
- This position may be subject to an irregular tour, which could include weekends, holidays and special work.
- Must possess and maintain a valid state driver's license. This position requires travel to other bases within the CNRMA region or CNIC enterprise.
- Travel could be up to 50% of the time depending on projects and workload.
- Starting May 7, 2025, non-affiliated individuals requesting access will need a REAL ID-compliant driver's license or another acceptable form of identification to access CNRMA Installations. (review required documents section for more information.)
- Employee is required to have, or obtain within 6 months after job appointment, the required state and Federal government licenses and certifications needed to perform the job requirements.
Qualifications
Resumes must include information which demonstrates experience and knowledge, skills, and ability (KSAs) as they relate to this position. Applicants are encouraged to be clear and specific when describing their experience level and KSAs.
A qualified candidate must possess:
A minimum three years documented general experience, with two years documented specialized experience in the applicable combination of trades noted herein sufficient to perform the duties of the position.
A recognized professional certification or license in one trade is preferred.
Knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, chemicals and basic safe work practices is required.
Ability to read, write, and follow appropriate plans and specifications. Ability to communicate verbally and to perform all necessary math computations and measurements.
Plumbing Work: Knowledge of how various supply, disposal and utility systems and equipment are installed and operated. Knowledge to plan and lay out the installation and modification of various system and equipment; to interpret and apply building plane and blueprints; to use shop mathematics; and lay out such things as angles, arc and circles. Skill in the use of any of the accepted trade methods and techniques and in the use of tools and equipment.
Carpentry and Paint: Must be knowledgeable in shop mathematics and possess the skill to compute complex and exact projects with features such as arcs, tangents and circles. Must have the ability to read, interpret, and apply building plans, specifications, blueprints and sketches of all complexity. Must have the knowledge of the basic components of a structure and understand the purpose of the components as they relate to the complete structure so as to insure strength, support and fit of assemblies. Must be skilled in the use of a variety of hand and power shop tools of the carpentry trade to include set up and adjustment of tools to accomplish all tasks. Must be knowledgeable of safety measures when using tools and must possess the skill to maintain the tools to include sharpening saws, tools, and accessories. Must have knowledge of standard surface preparation and coating methods and techniques. Must have skill in the use of such tools and equipment as scrapers, wire brushes, putty knives, sandpaper, paint brushes, rollers, spray guns, etc.
Mason: Knowledge of the techniques and procedures of brick, block, and stonework. Has a basic knowledge of the techniques and procedures involved in laying brick, block, and stone in the construction and repair of walkways, veneer wails, and similarly uncomplicated structures. Has ability to use trowel, spirit levels, plumb bobs, air-hammers, and chisels in preparing work surfaces and accomplishing mason tasks. Knowledge of and ability to use the various hand and power tools associated with the occupation.
Education
This position does not have a positive education requirement.
Required Documents
The following documents are required at the time of application:
- Resume
- Proof of education/training/licensure: provide a copy of your awarded/conferred college transcript(s) and licensure as applicable
- If claiming Department of Defense (DOD) Non-appropriated Fund (NAF) Business Based Action (BBA) priority consideration: provide a copy of the notice of separation
- If claiming Military Spouse Preference: provide a copy of the sponsor's Permanent Change of Station (PCS) orders and a marriage certificate at the time of application
- If claiming Veteran's Preference: provide a copy of your DD-214, Member-4 page and any supporting documentation (SF-15, V.A. disability letter, proof of service, etc.)
- If a current or former Federal Employee: provide a copy of your most recent Personnel Action Report (PAR) or SF-50
NOTE: Failure to provide the required documents may impact eligibility, qualifications determination.
Starting May 7, 2025, non-affiliated individuals requesting access will need a REAL ID-compliant driver's license or another acceptable form of identification to access CNRMA Installations. This applies to everyone, including the following: but not all inclusive:
- Vendors
- Dependents aged 18 and older
- Service Providers
- Veterans with service-connected disabilities
- Contractors
- Visitors (includes visitors in same vehicle with CAC holder)
- Transportation services (taxi, limo, ride share)
- Agent, Assist, Aid, Care Giver Letters
- Au Pairs, Child Care Providers
What are acceptable alternative forms of identification for base access? If you don't have a REAL ID-compliant driver's license, you can use one of the following:
- U.S. passport or passport card
- Military ID card (Common Access Card or CAC, DoD retired ID card)
- Permanent resident card (Green Card)
- Transportation Worker Identification Credential (TWIC)
- Enhanced Driver's License (EDL)
- Other forms of identification accepted by the Department of Homeland Security
How can I obtain a REAL ID-compliant license? To obtain a REAL ID-compliant license, you'll need to visit your state's driver's license agency with the following documents:
- Proof of identity (e.g., birth certificate, passport)
- Proof of Social Security number (e.g., Social Security card)
- Two proofs of residency (e.g., utility bills, bank statements)
Please follow the link below for more information in regards to READ ID for base access:https://cnrma.cnic.navy.mil/Operations-and-Management/Base-Access/REAL-ID-Act/
How to Apply
To be considered for this vacancy you must apply and complete the online questionnaire and submit the documentation specified in the Required Documents section above.
The complete application package must be submitted by 11:59 PM (EST) on 08/20/2025 to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
To preview the Application Questionnaire, please click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12771824
It is your responsibility to ensure your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date.
Additional information on how to complete the online application process and submit your online application may be found on the https://help.usastaffing.gov/Apply/index.php?title=Applicant
To verify or check the status of your application, log into your USAJOBS account. Once logged in, the Welcome screen lists your applications, your application status and the date it was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status
DON is an Equal Employment Opportunity Employer. All qualified candidates will receive consideration without regard to race, color, national origin, religion, sex, age, mental or physical disability, genetic information, reprisal, marital status, political affiliation, sexual orientation, or any other non-merit factor. The DON provides reasonable accommodations to applicants with disabilities. Applicants with disabilities who believe they may require reasonable accommodation(s) should email their request to MILL_HQ_NAF_HR.FCT@navy.mil to ensure proper consideration is given.
Next steps
Using the required qualifications of the position, a standardized rating and ranking criteria of knowledge, skills, and abilities will be used to screen and assess each application.
If you provided an email address, you will receive an email message acknowledging receipt of your application. Times may vary during the hiring process, as your application status updates/changes you will be notified with a notification letter via email.
Please notify us if your contact information changes after the closing date of the announcement. Also, note that if you provide an email address that is inaccurate or if your mailbox is full or blocked (e.g., Spam Blocker, etc.), you may not receive important communication that could affect your consideration for this position.