Clarification from the agency

"Agency" means current permanent DoD employees. Veterans eligibilities include 30% or more Disabled Vet, Veterans Employment Opportunities Act (VEOA), Military Spouse Preference (MSP) eligibles, Retained Grade Preference (RGP) eligibles, and Military Reserve and National Guard Technician eligibles in the commuting area may also apply.

• Receives, verifies, sorts and classifies, warehouses, and issues a variety of excess surplus property.
• Conducts extensive review, research, verification and receipt of a variety of routine and complex property.
• Employs Federal Cataloging Procedures to properly validate or change data elements.
• Certifies that items are eligible for sale.
• Reviews disposal turn-in document (DTID) accompanying material.
• Compares data against property to assure correct information including proper documentation (e.g., stock number, nomenclature, quantity, unit of issue, disposal authority code, DEMIL and condition code).
• Visually inspects usable property for obvious signs of condition and determines acceptability.
• Determines condition and reportability and special handling requirements (e.g., hazardous material, precious metals, security, DEMIL, Special focus items, etc.) and assigns appropriate classification instructions for warehousing.
• Verifies accuracy of demilitarization codes, takes action to challenge questionable items/codes, and maintains segregated storage of property requiring DEMIL.
• Ensures proper certification is attached to turn-in document when demilitarized by host or generating activity.
• Performs daily inspection and maintenance and completes appropriate forms.
• Responsible for the pre-receipt/inspection/receipt/storage/safeguarding/handling of hazardous property.
• Performs pre-receipt examination of property on site at the generation point.
• Operates forklifts and related materials handling equipment to move, load and unload, stack or un-stack palletized materials, supplies, and equipment.

Conditions of employment

• Must be a U.S. citizen
• Tour of Duty: 1st Shift
• Security Requirements: Non-Critical Sensitive
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Fair Labor Standards Act (FLSA): Non-Exempt
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
• Recruitment Incentives: Not Authorized
• Bargaining Unit Status: Yes
• Selectees are required to have a REAL ID or other acceptable identification documents to access certain federal facilities. See https://www.tsa.gov/real-id for more information.
• Pre-Employment Physical: Required

Qualifications

Applicants will be rated in accordance with the Office of Personnel Management Qualification Standard for Trades and Labor Occupations. Although a specific length of time and experience is not required, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties at the level for which you are applying. Emphasis is placed on how you gained the quality of experience, not necessarily the length of time, and the required ability or potential to perform the job. Applicants who do not meet the screen-out element (SOE) will be eliminated from further competition.

The SOE for this position is:

• Ability to do the work of a Materials Examiner and Identifier (Forklift Operator) without more than normal supervision

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Physical Effort:
Climb stacks of property during inspection, pre- receiving and receiving and verification operations, necessitating considerable kneeling, crawling, bending, walking and stooping. Physical handling of property will be routine. Incumbent must be able to lift property weighing up to 50 pounds and shift/relocate other heavy materials using appropriate material handling equipment.

Working Conditions:
Work is done inside and outside for long duration (through breaks, etc. as necessary) to complete immediate tasks. Inside work is performed in warehouses which may be drafty or unheated. Outside work is subject to inclement weather. Discomfort is experienced while wearing protective clothing; respirators, goggles or face masks. Worker may be exposed to hazardous vapors, liquids, powders and solids and the possibility of cuts and bruises. May be subject to hazards of working close to moving equipment, for example, forklifts, trucks and conveyor lines.

OTHER SIGNIFICANT FACTS: SAFETY AND HEALTH RESPONSIBILITIES: As a condition of employment, employee shall adhere to all safety standards, rules, regulations, and procedures and use personal protective equipment and devices as required and work in a safe and healthful manner. Must remain continually aware of the necessity for job safety and health precautions. Must immediately report all occupational mishaps, illnesses, and injuries to supervisor on day of occurrence. Reports and corrects, where possible, unsafe and unhealthful conditions to supervisor. Any person(s)'performing the duties of this position description may be required to participate in a medical surveillance program. Inclusion in the medical surveillance program will be determined by the DLA Disposition Services/DRMR Safety and Occupational Health Manager, in conjunction with the host industrial hygienist/bio-environmentalist. Work assignments include working with materials or wastes that may exhibit hazardous properties including ignitability, corrosiveness, reactivity, and toxicity. Working with hazardous materials or hazardous wastes requires training in accordance with Federal, State and installation requirements.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

The assessments for this job will measure the following Job Elements/Competencies:

• Ability to do the work of a Materials Examiner and Identifier (Forklift Operator) without more than normal supervision.
• Technical Practices
• Knowledge of Materials
• Ability to Interpret Instructions, Specification, etc (other than blueprints)
• Skill in Dexterity and Safety

Once the application process is complete, a review of your resume and supporting documentation may be completed and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. The rating you receive is based on your responses to the assessment questionnaire. The score is a measure of the degree to which your background matches the job elements/competencies required for this position. If your resume and/or supporting documentation is reviewed and a determination is made that you have inflated your qualifications and or experience, you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your rating.

To apply for this position you must provide a complete Application Package. Each Application Package MUST include:

1. Your Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans.
   
2. Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents.

Interagency Career Transition Assistance Program (ICTAP): If you are an eligible ICTAP applicant you may apply for special selection over other candidates for this position. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated at a score of 85 or higher for this position. ICTAP eligibles must submit one of the following as proof of eligibility for the special selection priority: a separation notice; a "Notice of Personnel Action" (SF-50) documenting separation; an agency certification that you cannot be placed after injury compensation has been terminated; an OPM notification that your disability annuity has been terminated; OR a Military Department or National Guard Bureau notification that you are retired under 5 U.S.C. 8337(h) or 8456.

Priority Placement Program (PPP) DoD Military Spouse Preference (MSP): In order to receive this preference, you must choose to apply using the "Priority Placement Program, DoD Military Spouse Preference (MSP)" eligibility. If you are claiming MSP and are determined to be among the Best Qualified for the position, you may be referred to the hiring manager as a priority applicant. To be eligible as a MSP, you must submit the following supporting documents with your application package: Spouse's Permanent Change of Station (PCS) orders; Marriage Certificate or License; PPP Self Certification Checklist; Veterans' Preference documentation (e.g., DD-214, VA Letter, Statement of Service, if applicable); Transcripts (if applicable). These documents must provide acceptable information to verify: Residency within the commuting area of your sponsor's permanent duty station (PDS); proof of marriage to the active duty sponsor; proof of military member's active duty status; and other documentation required by the vacancy announcement to which you are applying. NOTE: Previous federal employees must also submit the following additional documentation: SF-50s (e.g., LWOP, highest grade held, overseas appointments, etc.), SF-75 information, and documentation of performance rating of record (dated within the last 12 months). Selected PPP MSP applicants will need to certify they have not accepted nor declined another offer of permanent, Federal employment (to include NAF and the military exchange services) since relocating to the military sponsor's current duty station.

Priority Placement Program (PPP) DoD Retained Grade Preference (RGP): In order to receive this preference, you must choose to apply using the "Priority Placement Program, DoD Retained Grade Preference (RGP)" eligibility. If you are claiming RGP and are determined to be Well Qualified (score of 85 or above) for the position, you will be referred to the hiring manager as a priority applicant. Information and required documentation for claiming RGP may be found at the General Applicant Information and Definitions link below. To be eligible as a RGP, you must submit the following supporting documents with your application package: a signed Retained Grade PPP Self-Certification Checklist (DD3145-1 (whs.mil)); a copy of your Notification of Personnel Action (SF-50) effecting the placement in retained grade status; or a copy of the notification letter you received regarding the RIF or classification downgrade.

Next steps