Clarification from the agency

This is a Defense-Industrial Base (DIB) Direct Hiring Authority notice open to the Public.

• Receives, stores, and assembles for issue, shipment, and distribution, a wide variety of materials using mechanized, automated, and manual material moving equipment.
• Receives, unloads and processes incoming shipments. Checks accompanying documentation against container or packing labels. Follows established procedures in reporting over, short, misdirected, or damaged materials.
• Assembles items for shipment in the loading area according to information provided on the shipping requests and checks the condition of shipping containers prior to loading. Ensures shipments are properly loaded onto the right conveyances.
• Counts types and quantities of items during inventories, and maintains tally listings during the count. Recounts or searches other storage locations to assist in determining the basis for over, short, or misplaced items.
• Operates one or more types of material handling equipment such as standard type forklift with a lifting capacity of up to 15,000 pounds, warehouse tractor, stock selector, or general-purpose vehicle.
• May pack and/or repack a variety of items utilizing a wide variety of standard packing materials, methods and techniques.

Conditions of employment

• Must be a U.S. citizen
• Tour of Duty: Set Schedule
• Security Requirements: Non-Sensitive
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Fair Labor Standards Act (FLSA): Non-Exempt
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
• Recruitment Incentives: Not Authorized
• Bargaining Unit Status: Yes
• Pre-Employment Physical: Required
• Selectees are required to have a REAL ID or other acceptable identification documents to access certain federal facilities. See https://www.tsa.gov/real-id for more information.
• Must be able to obtain and maintain a valid Material Handling Equipment (MHE) license.
• Must be able to obtain and maintain licenses and/or certifications required by the installation, federal, state, and local laws.
• This position and any future selections from this announcement may be used to fill various shifts located within DLA Distribution Susquehanna.

Qualifications

Applicants will be rated in accordance with the Office of Personnel Management Qualification Standard for Trades and Labor Occupations. Although a specific length of time and experience is not required, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties at the level for which you are applying. Emphasis is placed on how you gained the quality of experience, not necessarily the length of time, and the required ability or potential to perform the job. Applicants who do not meet the screen-out element (SOE) will be eliminated from further competition. The SOE and minimum qualifications for this position is:

• I perform the common tasks of the job to be filled but under close supervision, such as receiving general guidance on assignments, such as where and how identified items are to be received, stored, and maintained.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Physical Effort: The operator performs work on dirt, wooden, asphalt, and concrete floors and is required to walk, stand, stoop, bend and work in tiring and uncomfortable positions. Must be able to lift and carry supplies and material that weigh up to 40 pounds. Heavier items are moved with weight handling equipment or with assistance from other workers. Required to open and close boxes, cartons, bags, and other containers to inspect and count contents. Moderate physical effort is required in operating forklift truck and rising, lowering, and tilting loads be moved

Working Conditions: Material handling work is done inside and outside (wood frame, Quonset, and concrete warehouses). This incumbent may work inside in areas that are hot, cold, damp, rainy weather, drafty, or poorly lighted and may be dirty, dusty, and greasy. Incumbent may work in bad weather in outside areas such as open docks and storage yards. The material handler is frequently exposed to the possibility of cuts, scrapes, bruises, and broken bones; falls from ladders; or injury from forklift trucks overturning or other equipment. Work may require wearing protective clothing such as hardhats, steel toed shoes, rubber gloves, masks, and rubber aprons.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

The assessments for this job will measure the following Job Elements/Competencies:

• Ability to do the work of a Materials Handler without more than normal supervision (Screen Out
• Element)
• Technical Practices
• Ability to Interpret Instructions, Specifications, etc. (other than blueprints)
• Knowledge of Materials
• Skill in Dexterity and Safety

Open-Continuous Cut-off Information: An initial cut-off date of January 13th, 2025 will be used to evaluate candidates for the initial available vacancies. Any application received after the initial cut-off date will only be considered should additional vacancies be received after the initial cut-off date. If additional vacancies are received after the initial cut-off date, ALL applicants that have applied will be evaluated/re-evaluated and ranked as stated within the Evaluation statement in the announcement.

Direct Hire Evaluation: Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. This vacancy will be filled through a Department of Defense Direct Hire Authority. All applicants who meet the basic qualification requirements will be forwarded to the Selecting Official for consideration. The rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to this vacancy. We will evaluate your application for basic eligibility and to determine if your experience meets the basic qualification requirements described in the announcement. All applicants who meet the qualifications and other basic requirement are eligible for referral and selection consideration. Please follow all instructions carefully. Errors or omissions may affect your rating.

To apply for this position you must provide a complete Application Package. Each Application Package MUST include:

1. Your Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans.
2. Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents.

Next steps