Mechanical Engineer Job in Naval Support Activity, Mechanicsburg, PA

Vacancy No. DE-12567974-25-TLB Department Naval Sea Systems Command
Salary $49,982.00 to $115,253.00 Grade 7 to 12
Perm/Temp Permanent FT/PT Full-time
Open Date 10/10/2024 Close Date 10/9/2025
Job Link Apply Online Who may apply Public
Locations:
Naval Support Activity, Mechanicsburg, PA


Summary

This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

This job is open to

Clarification from the agency

U.S. Citizens

Duties

  • You will review and approve/disapprove complete contractor engineering drawing sets addressing configuration, construction, operating pressures and temperatures, materials, finishes, and tolerances.
  • You will prepare, evaluate, and provide specifications used in the fabrication and assembly of spare and repair parts.
  • You will prescribe test methods and procedures used to ensure quality, including the specification of test equipment required for performance and life cycle testing.
  • You will review and approve contractor requests for waiver/deviation from contract requirements, alternate contractors, and/or alternate/substitute assemblies, sub-assemblies, and component spare and repair parts.
  • You will assess the reliability of assemblies and sub-assemblies through the evaluation of empirical data and other failure and reliability data sources to identify flaws and stresses associated with performance.

Requirements

Conditions of Employment

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • This is a bargaining unit position.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Your resume must also demonstrate at least one year of specialized experience at or equivalent to the grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:

GS-07:One year of specialized experience, equivalent to a GS-05, as a professional engineer applying basic engineering concepts to assist in the design and layout of mechanical equipment and systems.

GS-09:One year of specialized experience, equivalent to a GS-07, as a professional engineer applying engineering principles to design, operate, or maintain Naval shipboard weapon systems.

GS-11:One year of specialized experience, equivalent to a GS-09, as a professional engineer reviewing plans for a wide variety of shipboard equipment related to mechanical engineering to identify engineering design, logistical, or maintenance support issues.

GS-12:One year of specialized experience, equivalent to a GS-11, as a professional engineer evaluating plans for a wide variety of shipboard equipment related to mechanical engineering to identify engineering design, logistical, or maintenance support issues.


Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0830/.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

GS-07:1 year of graduate-level education or Superior Academic Achievement.

GS-09:2 years of progressively higher-level graduate education leading to a master's degree or master's or equivalent graduate degree.

GS-11:3 years of progressively higher-level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree.

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Additional information

This announcement will use the Science and Technology Reinvention Laboratory (STRL) Bachelor's Degree direct hire authority to recruit and appoint qualified candidates to positions in the competitive service.

This position is covered by the Department of Defense Priority Placement Program.

Several vacancies may be filled.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf.

Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

As vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyer. You will be rated based on the information provided in your resume, along with your supporting documentation.

If selected, you may be required to provide additional supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All qualification requirements must be met before being considered for any vacancies.

Required Documents

A complete resume is required. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume, but it is acceptable to provide elsewhere in your application package: employer's name, starting and end dates (Mo/Yr), hours per week, and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume.

Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package.

Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified.

Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor

Are you a disabled veteran or claiming 10-point veterans' preference?
If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.

You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf.

Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).

Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents contain personal information such as SSN and DOB and some documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove said personal information before you submit your application. You must provide an un-sanitized version of the documents if you are selected.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

Interested Applicants must submit resumes/application packages to:
https://tinyurl.com/246crqm3


Facsimile applications will not be considered.

All resumes/applications must be received no later than the close date of this flyer.

It is the applicant's responsibility to verify that all information in their resume and documents, are received, legible, and accurate. HR will not modify answers/documents submitted by an applicant.

Failure to submit a complete application package will result in an ineligible rating and loss of consideration.

Agency contact information

Department of Navy EIC
Address
NAVSEALOGCENKYPTDIVNUWC MECH PA
5450 Carlisle Pike
Mechanicsburg, PA 17050
US
Learn more about this agency

Next steps

Qualified applicants will be referred to the hiring manager. The selecting official may choose to conduct interviews.

Our evaluation will be based on the information you provide. You should expect that we will verify performance, suitability, and security information and take that information into account in making employment offers.

Questions about this job
HRO Recruitment Specialist
Todd Warthin
(717) 605-1907
todd.a.warthin.civ@us.navy.mil


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.