Mechanical Engineer

• Senior Engineer in the Mechanical Design Section. GS-11 is a junior Mechanical Engineer leading to senior Engineer, GS-12.
• Prepare preliminary design studies, design memoranda, design calculations, final design plans, and technical specifications for large Civil Works construction projects.
• Develop preliminary and final design and layout of mechanical systems and equipment utilizing the CADD system as a design tool.
• Make determinations regarding the compliance of contractors' proposals.
• Coordinate with other engineers and architects during design development.
• Furnish technical advice to other engineers and technicians.

Conditions of employment

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Must possess and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles.
• You MUST submit a copy of your transcripts with your application package or proof of alternate Basic Requirements listed in this announcement.
• This position has a Temporary Duty (TDY) or business travel requirement of 15% of the time.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Mechanical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

GS-11 Specialized Experience: One year of specialized experience which includes assisting with the design of mechanical equipment using concepts of machine design, fluid dynamics, finite element analysis, or analysis of dynamic systems. (Must be well documented in resume to be referred to selection panel). This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Mechanical Engineer.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12 Specialized Experience: One year of specialized experience which includes experience working independently in the design of mechanical equipment using concepts of machine design, fluid dynamics, finite element analysis, or analysis of dynamic systems. (Must be well documented in resume to be referred to selection panel). This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For the GS-12, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. Must upload proof educational requirement has been met.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

• Attention to Detail
• Customer Service
• Flexibility
• Integrity/Honesty
• Interpersonal Skills
• Learning
• Reading Comprehension
• Reasoning
• Self-Management
• Stress Tolerance
• Teamwork

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Veterans and Military Spouses will be considered along with all other candidates.

The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements.

As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.

1. Your resume:

• Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration.
• For each relevant work experience, make sure you include the employer's name, job title, start and end dates (include month and year), for qualifications purposes, the number of hours worked per week, and a brief description that show you can perform the tasks at the required level listed in the job announcement. If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position.
• Use plain language. Avoid using acronyms and terms that are not easily understood. The hiring agency will not make assumptions about what's in your resume.
• If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations, and you may not be considered for this vacancy.
• For additional information, to include formatting tips, see: What to include in your resume.

2. Other supporting documents:

• Cover Letter, optional
• Most recent Performance Appraisal, if applicable
• This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses

NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.

Next steps