Mechanical Engineer

Clarification from the agency

This announcement is open to U.S. Citizens or Nationals; and Career transition eligibles (CTAP, ICTAP, RPL).

At the full performance level (GS-12) the major duties of this position include, but are not limited to Technical Consultation and Guidance; Reviewing; and Engineering Analysis:

Technical Consultation and Guidance: Provides technical expertise, mentorship, training, and advice to engineers, technicians, management, and internal and external stakeholders; contributes to engineering policies, technical guidelines, standards, procedures, and project objectives; and collaborates with technical teams and external partners to address complex mechanical engineering issues.

Reviewing: Conducts and supports technical and peer reviews of designs, drawings, engineering analyses, specifications, cost estimates, contract documents, and related correspondence. Verifies technical accuracy, constructability, compliance with applicable policies and standards, and adherence to quality assurance requirements before documents are approved or accepted.

Engineering Analysis: Performs advanced mechanical engineering studies and evaluations involving planning, data collection, modeling, risk analysis, instrumentation data, design development, diagnostic testing, commissioning, and operational support. Develops procedures and recommendations for unique or complex problems; evaluates equipment and systems; supports acceptance testing and maintenance activities; and prepares or reviews cost estimates for significant projects.

At the GS-11 level, the major duties of this position include, but are not limited to Technical Consultation and Guidance; Reviewing; and Engineering Analysis

Technical Consultation and Guidance: Provides technical support, guidance, and training to junior engineers, technicians, and internal partners. Assists in interpreting engineering analyses, supports team discussions, and assists senior engineers in developing technical standards and guidelines. At this level, consultation is advisory and collaborative-focused on reinforcing established policies and contributing to technical decision-making under the oversight of senior engineers.

Reviewing: Conducts and assists in technical reviews and peer reviews of designs, drawings, calculations, specifications, cost estimates, and engineering analyses. Ensures technical accuracy, completeness, and adherence to applicable codes and standards. Confirms compliance with quality assurance requirements and assists in ensuring documents are ready for technical approval.

Engineering Analysis: performs and coordinates engineering analyses that include technical planning, data collection, modeling, troubleshooting, and risk estimation. Provides engineering recommendations based on conventional and well-established methods. Provides analyses supporting feasibility studies, preliminary and final design work, contractor design submittals, equipment evaluations, and field acceptance testing. Assignments may involve multiple systems or complex facilities, applying established methodologies and precedents to address problems.

Duties will be developmental in nature when filled below the full performance level.

This is an open continuous announcement in which applications are accepted over several months and reviewed according to multiple cut-off dates. Applicants who apply by the initial cut-off date will receive first consideration. The first cut-off date is 11:59 pm ET, 10/20/2026. Applicants will have 5 days to complete the required USA Hire Assessment after receiving the assessment notice. Applications will continue to be reviewed throughout the open period; however, additional referral certificates will only be issued when a hiring official has exhausted a current certificate and/or when additional vacancies arise. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement.

Conditions of employment

• Must be a U.S. Citizen or National.
• Appointment subject to background investigation and favorable adjudication.
• Males born after 12-31-59 must be registered for Selective Service.
• Direct Deposit participation required.
• Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/.
• As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which your fitness and whether your continued employment advances the public interest will be evaluated.

• You are required to complete training, obtain and maintain a government credit card with travel and purchase authority.
• You must be at least (1)18 years old or (2) at least 16 years old and: (a) Have graduated from high school or been awarded a certificate equivalent to graduating from high school; or (b) Have completed a formal vocational training program; or (c) Have received a statement from school authorities agreeing with their preference for employment rather than continuing their education; or (d) Be currently enrolled in a secondary school and either work only during school vacation periods or work part-time during the school year under a formal student employment program.
• Certification and/or training to serve as a Federal Acquisition Certification (FAC) Contracting Officer's Representative (COR) or Grants Officer's Technical Representative (GOTR) may be required as articulated in Department and/or Reclamation policies depending on assignment.

This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider:

• your performance and conduct;
• the needs and interests of the agency;
• whether your continued employment would advance organizational goals of the agency or the Government; and
• whether your continued employment would advance the efficiency of the Federal service.

*Additional Requirements located under qualifications*

Qualifications

Requirements Continued...

Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated.

Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Qualifications:

All qualifications must be met by the closing date of this announcement-01/05/2027-unless otherwise stated in this vacancy announcement.

To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected.

Minimum Qualification Requirements: To qualify for this position, you must meet the following minimum qualifications:

Basic Educational Requirement AND/OR Specialized Experience for the series to which you are applying.

Basic Educational Requirements: In addition to the specialized experience requirements for this position, you must meet at least one of the following:

Successfully completed a bachelor's or higher degree in Engineering in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET).
OR
Successfully completed a bachelor's or higher degree in Engineering that included differential and integral calculus and courses (more advanced than first year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
A combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

-AND-

To qualify for the GS-11 level: Applicants must possess one year of specialized experience equivalent to at least the next lower grade level GS-09 in the Federal service. Specialized experience for the GS-11 is defined as using Mechanical Engineering theories, principles, and practices applicable to engineering designs and/or construction contracting for water resource facilities such as dams, canals, hydroelectric power plants, pumping plants, and the operating characteristics of associated civil, mechanical, or electrical equipment. OR 3 years of progressively higher-level graduate education leading to a Ph.D., or have a Ph.D., or equivalent doctoral degree in engineering or a related field which provides the knowledge, skills and abilities for the position.
To qualify at the GS-12 level: Applicants must possess one year of specialized experience equivalent to at least the next lower grade level GS-11 in the Federal service. Specialized experience for the GS-12 level is defined as using Mechanical Engineering theories, principles, and practices applicable to engineering designs and/or construction contracting for water resource facilities such as dams, canals, hydroelectric power plants, pumping plants, and the operating characteristics of associated civil, mechanical, or electrical equipment. In addition, experience performing design studies, calculations, plans, specifications, and or construction contracting on water related and/or hydroelectric facilities.

Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your qualifications will be evaluated based on your application materials (e.g. resume, supporting documents), the responses you provide on the application questionnaire, and the result of any additional assessment(s) required for this position.

Your resume must not exceed 2 pages. Only the document submitted as the "Resume" under the Documents section will be used to determine your qualifications/eligibility and for rating purposes. In the event you submit more than one resume, only the latest submission will be reviewed.

Candidates will be rated and ranked using Category Rating procedures. These procedures place candidates with veteran's preference above non-preference eligibles within each category. Veterans with a service-connected disability of at least 10 percent are listed in the highest quality category, except when the position being filled is scientific or professional at the GS-09 grade level or higher. Under Category Rating, candidates will be rated and ranked into the following categories:

• Best Qualified - applicants possessing experience that substantially exceeds the minimum qualifications of the position including all selective factors and are highly proficient in all requirements of the job and can perform effectively in the position

• Well Qualified - applicants possessing experience that exceeds the minimum qualifications of the position including all selective factors and are proficient in most of the requirements of the job

• Qualified - applicants possessing experience that meets the minimum qualifications of the position including all selective factors and are proficient in some, but not all of the requirements of the job.

You will be assessed in the following competencies (knowledge, skills, abilities, and other characteristics):

• Written Communication
• Mechanical Engineering
• Oral Communication
• Project Management
• Problem Solving

In addition to the application and application questionnaire, this position requires successful completion of the USA Hire Assessment, if required.

Current or former displaced Federal employees who are surplus, displaced, or involuntarily separated have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP). To be considered under CTAP/ICTAP, you must be well-qualified, score at least 85 (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements), and be able to perform the duties of the position upon entry.

Veterans' preference will be based solely on the claimed preference. Your eligibility will not be changed based on the documentation provided. If you are uncertain which preference to claim, you can learn more by visiting the VetGuide.

Providing false or misleading information on your resume or supporting documentation may result in removal from consideration or other action consistent with applicable federal hiring regulations. Applicants who include vulgar, offensive, or inappropriate language or information in their application package will be ineligible for further consideration for this position.

The following documents are required and must be submitted by 11:59 PM (ET) on 01/05/2027 - unless otherwise stated in this vacancy announcement:

1. Resume which includes a list of all significant jobs held and duties performed, with dates in month-year format (include month/day/year format if needed for 52 weeks of experience), and indicate hours worked per week (or full-time). Your resume must clearly show how long you have held each grade/rank. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. The minimum font size is 10-point for all body text. All resumes must maintain a minimum 0.5-inch margins on all sides to ensure readability and prevent excessive content compression. Including supplemental pages or attachments disguised as resume extensions are prohibited and will not be reviewed to determine your eligibility/qualifications. Your 2-page resume must contain information sufficient to make a valid determination that you fully meet the specialized experience requirements. If you have federal experience, you should include series, and grade for each position held, and if experience is part of a career ladder position, you must clearly distinguish the job duties and length of time working for each grade level. More information on how to write a Federal Resume: https://help.usajobs.gov/faq/application/documents/resume/what-to-include
2. Complete All Required Assessment(s).
3. All college transcript(s), if qualifying based on education. Please submit both undergraduate and graduate level transcripts, as applicable.
4. Veterans Preference Documentation, if applicable. Veterans must submit a copy of your latest Certificate of Release or Discharge from Active Duty, DD-214 (member 4 copy) or other Documentation of Service and Separation under Honorable Conditions, as listed on the SF15. If you are a Disabled Veteran, Purple Heart Recipient, or Parent or Spouse of a Disabled or Deceased Veteran, you must submit all additional proof required by the SF15, and if applicable, a completed SF15. You may request a copy of your Department of Veterans Affairs letter from www.va.gov/records/ or call 1-800-827-1000. If you are a veteran within 120 days of discharge, you must submit signed documentation from the Armed Forces certifying: 1) your expected release/retirement from active duty, 2) under honorable conditions, 3) your pay grade/rank/rate at time of discharge, 4) dates of active-duty service, 5) any campaign or expeditionary medals received, & 6) dated within 120 days of your separation.
5. Interagency Career Transition (ICTAP) and Career Transition Assistance Plan (CTAP): You MUST submit proof of eligibility including 1) copy of the agency notice, e.g., RIF Separation Notice, Notice of Proposed Removal, etc.; 2) SF-50s (Notifications of Personnel Action) showing career/conditional tenure competitive status, promotion potential and duty location; and 3) your most recent performance appraisal. To exercise selection priority, displaced or surplus Federal employees must be well qualified. For more information visit: USAJOBS Help Center - Career Transition Programs (CTAP, ICTAP, RPL).

Failure to submit any of the above-mentioned required documents will result in loss of consideration due to an incomplete application package. It is your responsibility to ensure all required documents have been submitted.

Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials - you must remove your image from all documents.

Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices.

Next steps