Duties
As a NONDESTRUCTIVE TESTER, WG-3705-10, this position is located in the Aircraft Structural Maintenance Section of an Air National Guard aircraft Maintenance Group, Maintenance Squadron, Fabrication Flight. This is an Air National Guard (ANG) Dual Status Technician position requiring military membership, compatible military skill assignment, and classification. The primary purpose of this position is to inspect aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.
1. Determines test method, and prepares fluids and parts for nondestructive inspection. Interprets nondestructive inspection test results, and provides information about defects to repair center. Performs Oil Spectrometry process and analyzes wear metal content on engine lubricating oil and other fluids, and recommends corrective action. Establishes radiation areas for radiographic operations. Computes and monitors personal exposure areas for radiographic operations, and monitors personnel exposure data.
2. Performs nondestructive inspection on structures, components, and systems. Detects flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, Thermography, Shearography and ultrasonic test equipment. Determines metallurgical information of components according to alloy, temper, conductivity, and associated factors. May also serve as Alternate TMDE Monitor, PCAMS, Alternate Equipment Custodian, Alternate Supplies Manager, Alternate Hazardous Waste Monitor, Alternate Hazardous Communication Monitor, Alternate Spill Prevention Monitor, Alternate FOD Monitor, Alternate Radiation Monitor, Alternate Technical Order Monitor, Alternate Precious Metals Monitor, and Training Monitor.
3. Applies magnetic particle and/or liquid penetrant inspection to detect and interpret the relevancy of flaws in a variety of parts. Parts are numerous and varied, and are of ferrous and/or nonferrous metals, and consist of surface or near surface discontinuities in the metal; e.g., fatigue cracks, welding overlap, cold shut, or surface cracks that may stem from internal flaws, such as pipes, inclusions, or forging lap. Sets up each different liquid penetrant or magnetic particle method following Technical Orders (TOs), Time Change Technical Orders (TCTOs), or Work Control Documents (WCDs), or Nondestructive Testing Instructions (NDIs). Ensures the equipment and solutions are in compliance with technical guides and quality standards before performing tests and must submit an AFTO 22 if defects in TO's exist or an AF 107 if there is no technical data to accompany the task. Performs all processing tasks; i.e., dipping items in penetrant or magnetic particle baths, washing and drying, magnetizing and demagnetizing ferrous items, and subjecting them to Ultra Violet Black light to detect and evaluate flaws, their nature, size, scope, and exact location. If items are repairable, records test results, and marks defect areas and dimensions. Initiates WCDs that specify the needed repairs. Re-inspects all repairs performed on each component upon their return to the shop.
4. Uses and maintains tools. Maintains bench stock levels of parts, materials, tools, and equipment at prescribed levels. Uses tools and equipment associated with testing being conducted in the shop, as well as hand and power tools to do the work.
5. Utilizes safety practices and procedures following established safety rules and regulations to maintain a safe and clean work environment. Uses and assures proper fit of required Personal Protective Equipment and clothing. Follows federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards. Performs clean-up duties, such as cleaning equipment, sweeping, straightening, and lining up tools and other property in the assigned area.
6. Maintains records and documents actions. Manually documents actions taken or enters information into an automated system. Obtains required coordination and signatures.
7. Performs other duties as assigned.
Requirements
Conditions of Employment
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Participation in direct deposit is mandatory.
- U.S. citizenship is required.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
- Federal employment suitability required and determined by a background investigation before appointment to position.
- May be required to successfully complete a probationary period.
- Must have a valid driver's license.
- Must be able to obtain/maintain the necessary security clearance for the position.
- Military Assignment Requirement: Open to Enlisted members only
- Military Rank/Grade Requirement: Minimum Rank SrA/E-4 to Max Rank SSgt/E-5
- Compatible Military AFSC Requirement: 2A752
- This is not a cross training opportunity.
- Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214.
- Technicians are required to perform annual task evaluations on each inspection duty in order to maintain certification.
Qualifications
Areas of Consideration:
Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG.
Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG.
Area 3 - Current service members in the Oregon ANG.
Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard.
Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG.
GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS:
Work involves nondestructive examination of metals, composites, ceramics, plastics, and other materials for internal and external structural defects, delaminations, corrosion, and moisture penetration using magnetic particle, liquid penetrant, eddy current, radiographic, ultrasonic, or other types of nondestructive test processes and equipment. Experience or training which demonstrates the ability to set up and operate test equipment, use test apparatus to apply tests to material or products, record readings, observe and record established reactions, and classify according to defined categories.
WG-10 - 18 months of experience or training which demonstrates the ability to set up and operate test equipment, use test apparatus to apply tests to material or products, record readings, observe and record established reactions, and classify according to defined categories. Experience or training in using ultrasonic and/or eddy current inspection techniques to observe, measure, and detect discontinuities and flaws. Experience classifying test results, identifying material deficiencies, and recommending courses of action for items of equipment. Experience recommending engine components to be inspected and forwarding results to the appropriate authority. Experience performing scheduled inspections of testing equipment ensuring compliance with established technical regulations and procedures.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
In order to qualify for this position you must submit the following:
- Detailed resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
- Supporting documentation that show you meet the military rank and AFSC requirements if necessary (Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214).
- Transcripts, license, or certification that you meet the education requirements if necessary.
The following items may be submitted as supporting documentation:
Cover Letter, DD-214/ Statement of Service, Diploma/ GED, Disability Letter (Schedule A), Disability Letter (VA), License, OF-306, Police Background Check - DD369, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-15, SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript
RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.
Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil
Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil
Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil