Duties
As a NONDESTRUCTIVE TESTER - Title 32, WG-3705-10, you will inspect aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.
MAJOR DUTIES:
1. Determines test method, and prepares fluids and parts for nondestructive inspection. Interprets nondestructive inspection test results, and provides information about defects to repair center. Performs Oil Spectrometry process and analyzes wear metal content on engine lubricating oil and other fluids, and recommends corrective action. Establishes radiation areas for radiographic operations. Computes and monitors personal exposure areas for radiographic operations, and monitors personnel exposure data.
2. Performs nondestructive inspection on structures, components, and systems. Detects flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, Thermography, Shearography and ultrasonic test equipment. Determines metallurgical information of components according to alloy, temper, conductivity, and associated factors.
3. Applies magnetic particle and/or liquid penetrant inspection to detect and interpret the relevancy of flaws in a variety of parts. Parts are numerous and varied, and are of ferrous and/or nonferrous metals, and consist of surface or near surface discontinuities in the metal; e.g., fatigue cracks, welding overlap, cold shut, or surface cracks that may stem from internal flaws, such as pipes, inclusions, or forging lap. Sets up each different liquid penetrant or magnetic particle method following Technical Orders (TOs), Time Change Technical Orders (TCTOs), or Work Control Documents (WCDs), or Nondestructive Testing Instructions (NDIs). Ensures the equipment and solutions are in compliance with technical guides and quality standards before performing tests and must submit an AFTO 22 if defects in TO's exist or an AF 107 if there is no technical data to accompany the task. Performs all processing tasks; i.e., dipping items in penetrant or magnetic particle baths, washing and drying, magnetizing and demagnetizing ferrous items, and subjecting them to Ultra Violet Black light to detect and evaluate flaws, their nature, size, scope, and exact location.
4. Uses and maintains tools. Maintains bench stock levels of parts, materials, tools, and equipment at prescribed levels. Uses tools and equipment associated with testing being conducted in the shop, as well as hand and power tools to do the work.
5. Utilizes safety practices and procedures following established safety rules and regulations to maintain a safe and clean work environment. Uses and assures proper fit of required Personal Protective Equipment and clothing. Follows federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards.
6. Maintains records and documents actions. Manually documents actions taken or enters information into an automated system.
7. Performs other duties as assigned.
Requirements
Conditions of employment
MILITARY REQUIREMENTS:
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Military Grades: E-1 through E-6
***Trainees (2A7X2) accepted***
Conditions of Employment:
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- May be required to obtain an appropriate clearance to perform the work in sensitive areas.
- Technicians are required to perform annual task evaluations on each inspection duty in order to maintain certification.
- Ability to wear authorized PPE in performance of duties as necessary.
Qualifications
GENERAL EXPERIENCE: Experience or training which demonstrates the ability to set up and operate test
equipment, use test apparatus to apply tests to material or products, record readings, observe and record established reactions, and classify according to defined categories.
***Trainees (2A7X2) accepted***
SPECIALIZED EXPERIENCE: To qualify for the WG-3705-10 level, applicant must have at least 18 months Experience or training in using ultrasonic and/or eddy current inspection techniques to observe, measure, and detect discontinuities and flaws. Experience classifying test results, identifying material deficiencies, and recommending courses of action for items of equipment. Experience recommending engine components to be inspected and forwarding results to the appropriate authority. Experience performing scheduled inspections of testing equipment ensuring compliance with established technical regulations and procedures.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
The following supporting documentation is optional with your application:
1. Record Review RIP (NOT point credit summary or Career Data Brief) complete and current. This is used to verify AFSCs, aptitude scores, position status, time in service, time in grade, etc. This can be pulled from vMPF.
2. Current Fitness Report. Current (within 12 months) Fitness report from myFitness in pdf format.
3. AF Form 422 Current (within 12 months), Physical Profile Serial Report. If any PULHES are a "3", a statement indicating that individual is Worldwide Deployable needs to be submitted.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
BENEFITS AVAILABLE:
- Paid Time Off (Annual and Sick Leave)
- Paid Training Opportunities
- Paid Time Off for Military Duties
- Flexible Work Scheduling
- Fitness/Work Out Time (3hrs/week)
- 11 Paid Federal Holidays Off
- Promotion and Advancement Opportunities
- Work/Life Balance
- Federal Pension after 5 Years
- TSP Savings Plan (similar to 401K)
- Meaningful Work that directly affects the Wisconsin National Guard
- Challenging and Rewarding Career
- Professional Development and Mentorship Opportunities
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
Your resume showing places of employment, titles of positions held (include series and grade, if federal employment), dates (format should include Month and Year) of employment and duties performed.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.