In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-6600 Armament Work Family.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-6600 Armament Work Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to perform the work of an ORDNANCE EQUIPMENT MECHANIC little to no supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
- Comprehensive knowledge of ordnance systems maintenance, explosive safety, security, inspection, storage, accountability, transportation regulations/rules, practices, procedures, principles and policies. Ability to troubleshoot, and perform general maintenance on assigned MMHE supporting repair, replacement and TCTO compliance; includes safe operation of various light and heavy machinery and vehicles.
- Knowledge of maintenance methods and procedures to troubleshoot, repair, rebuild, perform testing, and install a variety of aircraft, demolition, and base defense ordnance systems containing a number of interrelated devices related to more complex ordnance equipment, multi-component devices and complete round weapon systems. Completes overhaul and final alignment on All Up Round (AUR) and complex weapon systems. Modifies, tests and performs TCTO actions on a variety of support/test equipment, sub-assemblies, and complete round/AURs. Knowledge and ability to operate automated and manual computer systems operations including the ASPR, AMST, MIS, TMRS, AF MC2, JHCS, WEBFLIS.
- Ability to read and autonomously interpret technical orders, technical manuals, blueprints, schematic drawings, manufacturers' manuals, maintenance bulletins, and to use complex shop mathematics and handbook formulas to complete work. Skilled in use, principles, concepts and methodology of standard hand and power tools of the electronics and electro-mechanical trades, general maintenance practices, repair capability and skill to apply the data.
- Knowledge, experience and skill to work independently and make independent judgment/decisions related to accepted maintenance shop practices, processes, and procedures within the framework of oral or written instructions. Perform, plan, crew chief and carry out work assignments utilizing appropriate technical references, suitable tools, equipment, and materials required to complete the assigned tasks.
- Capability to develop, plan, organize and train to the Combat Munitions Training (CMT) program encompassing resources requirements, developed lesson plans, CFETP and AFQTP requirements and schedules/conducts specialized AFSC training.
- Knowledge in performing configuration changes, and deviation from standard work practices to obtain dimensional accuracy, system performance, or equipment reliability using expertise, focused attention and visual coordination. Proficiency to plan and lay out the repair sequence, and complete the modification, repair, and installation of ordnance in the SRAN inventory.
FUCTIONAL REQUIREMENTS: The work requires physical exertion from frequent standing, bending, stooping, climbing, and stretching. Working in tiring and uncomfortable positions and in hard to reach places changing tires, processing ammo, working beside and on top of trailers utilizing chains and strapping material. May occasionally work in a sitting position while making repairs at a workbench, inspection tables, or operating test stands/ consoles. The work requires lifting, pushing, pulling, and carrying various sizes and shapes of boxes, tools, components and parts weighing between 50 pounds and 100 pounds.
ENVIRONMENTAL FACTORS: A combination of work performed inside shop areas with light, heat/ ventilation and a proportionate rate of outside work that may subject the employee to prevailing weather conditions, slippery or uneven surfaces, confined work spaces and noise with double hearing protection required. There is frequent exposure to cuts, bruises, shocks, burns, and injury from possible ruptured lines or component failure during high pressure testing. Must wear face masks and protective clothing when there is a possibility of exposure to toxic fuels, substances and acids, and will be required to work in close proximity to explosive components and devices on a daily basis. Situations for buildup and teardown require Arming/disarming, installation/removal of squibs, explosive device or component, these operations plus loading, assembly, primers, fuses, propellant charges, and boosters/ packing of hand-held signals, smoke signals, grenades and colored marker signals constitute situations where assets are more vulnerable to incident/accidental mishaps.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
This is an
Air Reserve Technician (ART) position. ARTs are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members; are subject to immediate call to active duty in mobilization to meet a national emergency. For additional information regarding ART positions and/or military qualifications, please call 1-800-257-1212. Retired military are usually ineligible for membership in the AF Reserve. Retired military that have active AF Reserve assignments may apply provided they show assignment (position) on the application. A military service member's statement of service/certification will be accepted IF a terminal leave form or DD214 cannot be provided. The statement/certification should indicate member's separation from active duty is within 120 days of the closing date of this announcement. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin, your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Your preference and/or appointment eligibility will be verified prior to appointment. Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.
Individuals selected for ART positions must meet both civilian qualifications and uniformed military requirements. In addition to meeting civilian qualifications, applicants must obtain military membership in the Air Force Reserve, wear the uniform, maintain job-specific military specialty requirements, and meet other military qualifications such as age, height, weight, and physical fitness standards. For more information click
here and speak with an Air Force Reserve Recruiter.