Duties
This position is located in the Joint Forces Headquarters-State, Logistics Directorate (G-4), Surface Maintenance Facility. The primary purpose of this position is to prepare and apply coating materials such as paints, varnishes, and rust proofing compounds on stationary and mobile equipment and on combat, tactical, and commercial vehicles.
- Prepares surfaces (i.e., metal, wood and glass) by removing rust, paint, and loose particles. Fills in holes and dents using body fillers and hardeners. Sands and evens out dents and scars to assure a smooth and level surface using sanders, scrapers, sandpaper, hand tools, wire brushes, and paint remover. Applies coatings to specified areas ensuring the surfaces are free from skips, runs, and drips. Applies rustproof compound to areas such as splash panels, quarter panels, seams structural members, and underbody construction. Applies coatings using brushes, rollers, and spray paint equipment.
- Prepares coating materials using guidelines set by the manufacturer, by tinting, toning, etching, blending, and mixing in various additives (i.e., retardants, hardeners, drying agents, and other additives) needed for the different coatings to work properly and achieve the necessary surface appearance. Uses measuring equipment (i.e., Zhan cup) to achieve the proper viscosity and thickness for applying the coatings. Applies prime, intermediate and final coats of semi-gloss, gloss and other paint, lacquer, enamel, varnish and shellac. Ensures that match, texture and appearance meet finish requirements. Replaces and applies markings/lettering as specified by appropriate manuals.
- Applies coatings using acceptable methods of the trade to include special finishing techniques to achieve desired results. Reads and interprets blueprints when applying camouflage patterns. Replaces markings and letterings as specified by the appropriate manuals. Reads and interprets directions that relate to mixture, use, and application of various kinds of coating materials, solvents, and precoating agents.
- Monitors and adjusts air pressures in paint booth, controls heat settings and drying times in drying booth to achieve proper surface adhesion of coatings. Completes records for paint usage and paint waste as per environmental regulations.
- Applies Chemical Agent Reactive Coating (CARC) materials in accordance with specifications and dimensions. Manages workflow into the paint shop as assigned by the supervisor. Determines what jobs can be done in a series or if items need to be completed alone. Confers with the customer when needed to best achieve the desired results. Cleans and maintains painting equipment.
- Performs other duties as assigned.
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a trial period.
- Participation in direct deposit is mandatory.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- This position is covered by the Domestic Violence Misdemeanor Amendment of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
Qualifications
Military Grades: Enlisted (E-8 and below)
GENERAL EXPERIENCE: Experience or training which demonstrates the candidate's knowledge of surface preparation (removal of rust, dirt, paint, etc.); coating methods (brushing, rolling, and spraying); and coating materials (paints, varnishes, shellacs, etc.). Must have the ability to use tools and equipment associated with the painting trade and to read and interpret directions
SPECIALIZED EXPERIENCE:
WG-08 - Experience or training which demonstrates the candidate's knowledge of standard surface preparation and coating methods and techniques. Experience must demonstrate the skill to sand, wire brush, scrape, spackle, putty, prep surfaces and select appropriate tools to complete assigned tasks. Experience must also demonstrate the skill to brush on, roll on, and spray coating materials, and apply other related methods and techniques, such as cutting-in techniques and dip and overflow methods. Experience which required the applicant to interpret and follow technical orders, specifications, and publications.
WG-09 - Experience or training which demonstrates the candidate's knowledge of any surface preparation and coating methods and techniques. Skill in building up, shaping, and leveling surfaces with metal and synthetic resins, plastics, and patching compounds; obtain finely smoothed surfaces with abrasive compounds, pumice, and rottenstone; even out dents and scars by burning-in processes; and treat surfaces with pre-coating agents.
Education
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).
Recruitment Incentive: Recruitment Incentives are only authorized to those considered by federal government standards as newly appointed. To be newly appointed it must be the (1) first appointment as an employee of the Federal Government; (2) An appointment of a former employee of the Federal Government following a break in Federal Government service of at least 90 days; or (3) An appointment of an individual in the Federal Government when his or her service in the Federal Government during the 90-day period immediately preceding the appointment was not in a position excluded by § 575.104 and was limited to one or more of the following: (i) A time-limited appointment in the competitive or excepted service; (ii) A non-permanent appointment in the competitive or excepted service; (iii) Employment with the government of the District of Columbia (DC) when the candidate was first appointed by the DC government on or after October 1, 1987; (iv) An appointment as an expert or consultant under 5 U.S.C. 3109 and 5 CFR part 304; (v) Employment under a provisional appointment designated under 5 CFR 316.403; (vi) Employment under an Internship Program appointment under § 213.3402(a) of this chapter; or (vii) Employment as a Senior Executive Service limited term appointee or limited emergency appointee (as defined in 5 U.S.C. 3132(a)(5) and (a)(6), respectively).
Relocation Incentive: An authorized management official approves a relocation incentives paid in accordance with this volume to a current federal employee who must relocate, without a break in service, to accept a position in a different geographic area. Employee must establish a new residence in the new geographical area and maintain residency for the duration of service agreement. Employee must have a current and "Fully Successful" performance appraisal immediately prior to the move.
PROBATIONARY PERIOD: As a condition of employment for accepting this position, you will be required to serve a 2-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing:
- Contact Information-your name and the best way to contact you.
- Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade.
- Education, certifications or licensures.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.