Duties
As a Powered Support Systems Mechanic, WG-5378-10, you will install, inspect, troubleshoot, maintain, repair, operate, overhaul, test and modifies powered ground support equipment, such as engine driven generator sets, heaters, ventilation, air compressing, refrigeration and air conditioning equipment for all special purpose tactical environmental control units, most of which have highly sophisticated and complex electronic, electrical and/or pneumatic control circuits. Provides similar support for fixed facilities. Perform intermediate-level maintenance on powered support equipment. This includes working on engines and generators such as removing, repairing, and overhauling of accessories, and rebuilding of units. Engine rebuilding work requires removal and replacement of crankshafts, pistons, and other integral parts. Replaces, checks and adjusts valves, bearings, cams, clutches, bushings, springs, armatures, pushrods, exhaust manifolds, tubing, hose and defective wiring. Diagnoses malfunctions, using visual and auditory senses, test equipment and applicable technical publications; makes repairs, removes, disassembles and assembles components and sub-systems.
PHYSICAL EFFORT: Physical effort involves stooping, bending, stretching, standing, climbing, and working in tiring and uncomfortable positions. Requires moderate to strenuous physical exertion including pushing and shoving of wheeled AGE. Lifts heavy equipment and components weighing up to 40 pounds and, with assistance, lifts items weighing over 40 pounds.
WORKING CONDITIONS: Works inside and outside, in inclement weather, on icy, wet and slippery surfaces and work areas, and in temperature and humidity extremes. Subject to the dangers from toxic fumes, oil, heat, fluids, shock, high noise level, possible cuts, abrasions and burns, extremely low temperature cryogenic liquids and extremely high air pressures while repairing, adjusting, positioning, or moving equipment. Works with high voltage electrical power and comes in contact with petroleum products. Incumbent works on equipment parts that are dirty and greasy and may be dangerous to operate or repair because of defects. Follows safety procedures and wears protective glasses and clothing which may be uncomfortable to wear for long periods of time.
Requirements
Conditions of Employment
- APPLICANTS SHOULD CONTACT THEIR STATE INCENTIVES MANAGER TO DETERMINE IF ACCEPTING THIS POSITION WILL AFFECT ANY BONUS RECEIVED FROM THE MILITARY.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Security Clearance requirements are determined by position and/or MOS/AFSC compatibility.
- Participation in direct deposit is mandatory.
- May be required to successfully complete a trial period.
- Males born after 31 December 1959 must be registered for Selective Service.
Qualifications
AREA OF CONSIDERATION: This position is in the Excepted Federal Civil Service "under the authority of 32 U.S.C. 709" and is open to Category 1 & 3 Only. Category 1: All permanent/indefinite (T32 and T5) technicians employed by the agency WITH dual FL National Guard military membership; Category 3: All current military members of the Florida National Guard. First consideration will be given to Category 1.
PCS: Permanent Change of Station (PCS) costs, MAY be authorized. Authorization for payment of PCS expenses will be granted ONLY after determination is made that payment is in the best interest of the Florida National Guard.
Recruitment / Relocation: Incentive MAY be authorized. ONLY after determination is made that payment is in the best interest of the Florida National Guard.
FLANG BUS Code NG0523: This position is "included" in the bargaining unit and eligible for labor organization
representation. The current exclusive representative is The Association of Civilian Technicians, Chapter 86 and the
President is Mr. Robert Morgan at rmorgan@actnat.com
MILITARY GRADES: Enlisted: E1 thru E5
GENERAL EXPERIENCE: Must you have experience or training which demonstrates the knowledge of mechanical maintenance work; ability to read and use technical manuals, illustrations, diagrams and schematics, and skill in the use of equipment and hand tools used in troubleshooting, testing, and repairing equipment.
SPECIALIZED EXPERIENCE: WG10 Must have at least 18 months experience or training removing, adjusting, replacing, cleaning, and installing parts, components, and accessories; experience which provided working knowledge of mechanical, electrical, and hydraulic theory applying to powered support equipment and systems; and skill to replace, fit, install, and make adjustments; experience which provided working knowledge of the makeup and operation of the various individual systems maintained and their interrelationships; experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
Education
If you are using Education to qualify for this position, you must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12787705
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.