Clarification from the agency

AREA OF CONSIDERATION: AREA I: All permanent employees currently assigned to the CSMS.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4/G-4), State Surface Maintenance Management Office. The purpose of this position is to perform maintenance production management, to achieve or maintain desired production levels, to serve as an equipment readiness expert for units supported by the facility, and to provide technical guidance and oversight to a lower-graded Production Controller.

DUTIES AND RESPONSIBILITIES:
(1) Establishes plans and schedules for maintenance and repair, using multiple process production methods and procedures for a variety of vehicles and equipment such as combat vehicles, heavy-duty engineering and mobile equipment, tracked vehicles, towed and self-propelled artillery, communications and electronic equipment, guided missile systems, and small arms. Implements maintenance plans and monitors progress of accomplishments. Using readiness, production and management reports available from the current automation support program and/or manual system, provides status of equipment, maintenance actions in progress, and location of equipment as required or requested. Responsible for data input of work order information, status changes, supply updates, and other pertinent information. Makes on-the-spot adjustments to repair priorities necessitated by unscheduled maintenance requirements.

(2) Ensures Modified Table of Organization and Equipment (MTO&E) or Table of Distribution and Allowances (TDA) reportable Line Item Numbers (LIN) are properly managed, reported and accounted for with respect to readiness reports, property accountability reports, and system management. Based on guidance received, prioritizes resources to ensure the highest level of readiness in support of training and mobilization requirements of supported units. Ensures that Army Materiel Status System (AMSS) equipment readiness reports are correct and submitted in a timely manner to meet Department of the Army (DA) reporting suspense.

(3) Programs workload, shop space, and available personnel on a short and long-term basis. Conducts initial and long range planning on matters which include multiple process production, maintenance operations, equipment readiness, including mechanical skills, availability of test and diagnostic equipment, repair parts, annual training requirements, mobilization requirements; and other factors influencing the repair, modification, and maintenance of equipment and readiness reporting.

(4) Ensures that unit Class 9 (CL IX) accounts are funded, budgeted, and executed to maximize readiness. Performs demand analysis on unit CL IX expenses to determine proper stockage to sustain unit mission requirements.

(5) Designates and maintains current maintenance priorities by Force Activity Designator, pacing items, Equipment Readiness Codes (ERC) A, B, and C equipment type, available funds, commander's priority, state/national priorities (in the case of floods, fires, and mobilizations), and unit supported. Using the current automation support system, authorizes the acceptance of equipment for repair; monitors work priorities, current status, and completion of work orders; requisitions and provides status of repair parts; and assures the effective utilization of maintenance personnel. Provides both standard and ad hoc reports on the status of work orders to the supervisor and/or units. Assists supervisory personnel regarding readiness, CL IX funding, production problems and work planning. Assists in the resolution of problems encountered between scheduled or unscheduled production or priority requirements.

(6) Analyzes repair methods and develops control procedures and policies to assure accomplishment of programs to meet priorities and deadlines established by higher authority or support activities. Ensures that this is performed in the most effective and efficient manner possible with good quality control and quality assurance procedures in place. Coordinates with units and other support activities concerning the delivery, status of repair operations, and/or pick up of completed work orders. Coordinates with logistical personnel, equipment specialists, higher ranked management officials, item managers at depots concerning critical shortages of repair parts required to support the maintenance repair program.

(7) Provides technical guidance and oversight to a lower-graded Production Controller. May provide guidance and oversight of mechanics, Tools and Parts Attendants, or other positions assisting in the maintenance production or maintenance management processes. Ensures necessary maintenance workers are available and that required reports are submitted to units and higher headquarters in a timely manner.

(8) Performs other duties as assigned.

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a trial period.
• Participation in direct deposit is mandatory.
• MUST HAVE A VALID STATE DRIVER’S LICENSE.

Qualifications

Military Grades: Enlisted

GENERAL EXPERIENCE: Experience, education, or training which indicates the candidate can reason in quantitative terms, can express himself/herself orally and in writing, and understands the terminology and data pertaining to the repair operations and processes characteristic of the production activity.

SPECIALIZED EXPERIENCE:
Must have at least 24 months experience, education or training preparing job or work orders; scheduling various phases of projects into the production facility; following up to see if work is progressing as planned and arranging for adjustments in materials, machine processes, and work sequencing allowing for changes. Experience with current automation support programs to input data, provide status of equipment, and monitor job order status, monitor work priorities, requisition repair parts, track repair parts status, etc.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

1. Ability to communicate both orally and in writing.

2. Ability to exercise initiative in taking timely action to schedule and obtain required materials.

3. Knowledge of the organization and work procedures of the production activity.

4. Ability to exercise considerable initiative in taking prompt and decisive action to prevent or alleviate delays due to conflicts in scheduling, lack of materials, or faulty work processes.

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing:

• Contact Information-your name and the best way to contact you.
• Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade.
• Education, certifications or licensures.

It is highly suggested that applicants address the General and Specialized Experience required of the position within their resume or on a separate document. All information provided during the application process will be verified. Failure to address all General and Specialized Experience requirements may result in non-selection for an interview.

Next steps