Clarification from the agency

Open to applicants who have graduated, within the past two years, (with an associate, bachelor, master, professional, doctorate, diploma, vocational, technical degree, or certificate, etc.) from a qualifying educational institution or career or technical education program (including registered Apprenticeship Programs, Peace Corps, AmeriCorps, Job Corps, Climate Corps). Students who will meet the education requirements at the end of Spring semester 2026 may apply.

GS-07:

• Assists in planning and conducting portions or limited inspections or compliance reviews (or independently conducts inspections of business establishments and worksites whose operations are generally characterized by the presence of moderately stable, low-risk processes or some higher hazards or unsafe working conditions or technically difficult operations which are covered by specific written guidelines) in establishments and worksites.
• Prepares final report or assigned portion of report, showing apparent violations, and recommends penalties and abatement dates. Recommends strategies and techniques for resolving unsafe or hazardous conditions.
• Conducts research assignments using internet technology to prepare for onsite inspections or in response to requests for information.
• Assists in conducting interviews with supervisors and employees.

GS-09:

• Inspects worksites, machine and equipment operations, environmental conditions, work practices, protective devices and equipment, and safety procedures. Records and photographs apparent violations of standards for use as evidence of existing hazards and unsafe working conditions.
• Assists agency attorneys in the preparation of evidence supporting the agency's findings of safety and occupational health violations where the employer contests the inspection results.
• Studies records and files covering mishaps, injuries, and equipment maintenance data. Reviews safety activities for evidence of compliance with prescribed safety requirements.
• Interviews supervisors and employees for information on specific working conditions to evaluate the total worksite environment. Documents ongoing case files with relevant documentation to support a legally sufficient case.
• Communicates with various parties at inspected worksites. Assists in investigating mishaps resulting in fatalities or injuries and serious incidents.

As the employee progresses, the assignments will become more difficult and complex with less supervision.

Conditions of employment

• Must be at least 16 years.
• Must be a U.S. Citizen.
• Candidate required to obtain the necessary security/investigation level.
• The entire duration of the Recent Graduate Appointment constitutes a trial period.
• Subject to a drug test prior to appointment at GS-11 and GS-12 grade levels.
• Requires medical exam and must maintain physical requirements.
• This position requires the use of personal protective equipment (PPE).
• You will be required to lift items weighing up to 25 lbs.
• Requires a valid driver's license.
• Appointees must sign a DOL Pathways Recent Graduate Program Participant Agreement.

Qualifications

Applicants must have graduated, within the past two years, (with an associate, bachelor, master, professional, doctorate, diploma, vocational, technical degree, or certificate, etc.) from a qualifying educational institution or career or technical educational program including registered Apprenticeship Programs, Peace Corps, AmeriCorps, Job Corps, Climate Corps).

THIS POSITION HAS A BASIC EDUCATION REQUIREMENT. ALL APPLICANTS MUST MEET THIS REQUIREMENT IN ORDER TO BE CONSIDERED.

Basic Requirements:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

You must meet the "Individual Occupational Requirements" listed above and the "Specialized Experience" to qualify for Recent Graduate - Safety Engineer, as described below.

At the GS-07 level: In addition to meeting the individual occupational requirement, applicants must have at least 52 weeks specialized experience at the next lower level in the normal career progression of the position being filled. When compared to Federal experience, this experience must be equivalent to at least the next lower grade level of GS-05. This experience may have been gained either in the Federal or private sectors. Resumes should reflect the majority but is not limited to the following specialized experience listed below:

• Review prior inspection records to gain a practical understanding of hazardous or unsafe conditions.
• Assist in analyzing work processes to verify conditions meet OSHA rules and regulations.
• Assist in identifying occupational health hazards in various work settings to eliminate safety risks.

OR

Education: One full year of progressively higher-level graduate education or Superior Academic Achievement in a bachelor's degree program. (Note: You must attach a copy of your transcripts.)

OR

Combination of Education and Experience: A qualifying combination of education and competencies as described below.

At the GS-09 level: In addition to meeting the individual occupational requirement, applicants must have at least 52 weeks specialized experience at the next lower level in the normal career progression of the position being filled. When compared to Federal experience, this experience must be equivalent to at least the next lower grade level of GS-07. This experience may have been gained either in the Federal or Private sectors. Resumes should reflect the majority but is not limited to the following specialized experience listed below:

• Assist in conducting a portion of an investigation to identify unsafe working conditions.
• Audit accident and injury records or safety plans to verify documentation meets OSHA rules and regulations.
• Prepare reports, or portions of reports, to show OSHA violations discovered during inspections.

OR

Education: completed a Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position, such as experience with assisting in identifying and evaluating health hazards; surveys, assessing, understanding, and investigating health problems, determining the probable cause, and recommending solutions. (Note: You must attach a copy of your transcripts.)

OR

Combination of Education and Experience: A combination of education and experience as described below.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your evaluation will be based on how well you meet the qualifications outlined in this vacancy announcement, as demonstrated through your resume and supporting documentation.

Click Application of Veterans Preference for more information.

You may preview application questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/12921367

If you meet the minimum qualifications, you will be evaluated against the evaluation factors below and will be placed into a category based on your vacancy question responses.

Category A - Meets the basic qualification requirements for the vacancy and has successful experience in the same or similar job that has demonstrated superior proficiency in applying critical competencies required by this position to work of increased levels of difficulty and complexity.

Category B - Meets the basic qualification requirements for the vacancy and demonstrates satisfactory proficiency in the critical competencies required by this position.

Category C - Meets the specialized experience described in the minimum qualification requirements section of this announcement and demonstrates proficiency in the basic competencies.

Clickhere for Evaluation details.

SME Resume Panel Review

Subject Matter Experts (SMEs) will review your resume to assess your technical qualifications based on the competencies listed below. Applicants who meet the required qualifications will advance to the next stage of the hiring process.

For each below competency, SME(s) will provide a rating of 0-Not Applicable, 1-Awareness, 2-Basic, 3-Intermediate, 4-Advanced, or 5-Expert based on the content of your resume.

Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies:

• Interpersonal Skills
• Oral Communication
• Problem Solving
• Safety Engineering
• Written Communication

The information you provide may be verified by a review of your paid, unpaid, and volunteer, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.).

The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date.

The following documents are required from ALL applicants (PLEASE READ CAREFULLY):

• Resumes are required: Provide a resume either by creating one in USAJOBS or upload one from their computer and USAJOBS profile. To receive full consideration for relevant and specialized experience, please list the month, year, and number of work hours worked for the experience listed on your resume. We also suggest that you preview the vacancy questions, and confirm that your resume supports your question responses.
• Proof of Eligibility: Academic transcript, a copy of a diploma, certificate, industry-recognized credential awarded from a qualifying career or technical educational program, or other official documentation from the qualifying educational institution showing that you meet the eligibility requirements for a Recent Graduate appointment, as described in the Qualifications and Education sections of this announcement. (The Department of Labor Career One Stop offers a certification finder to help identify a variety of industry-endorsed certifications.)
• If you are claiming extended eligibility due to military service performed during the two-year period following graduation, you must submit a copy of your DD-214 showing the dates of such service. (For active duty service members expecting to be honorably discharged or released within 120 days, click Active Duty).
• Proof of Qualifications: Academic transcripts are sufficient to demonstrate that you meet the minimum qualification requirements for this position, as described in this announcement, where you are seeking to qualify, at least in part, on the basis of your education. See Qualifications and Evaluations.

The following documents are required if applicable:

• Veterans Documents (if applicable): To be considered as a 5-point (TP) preference eligible, you must submit a copy of your DD214, Certificate of Release or Discharge from Active Duty. Your DD 214 must show the type of discharge and dates of active duty. To claim 10-point (CP/CPS, XP) preference, you must submit a copy of your DD214 and the proof of entitlement of this preference, which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. In addition, a Standard Form (SF-15) should be included, but is not required. (For active-duty service members expecting honorable or general discharge or release within 120 days, click Active Duty). For more information, go to Feds Hire Vets - Veterans Preference.
• Unofficial Transcript(s) (in English): If you are using education as a basis for qualifying for this position, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, Ph.D., etc.). If specific coursework is required to qualify, you must supply an unofficial transcript from each academic institution in which the required courses were taken in order to receive credit. You may upload your unofficial transcript(s) as one document with a maximum size limit of 5 MB.

NOTE: The OFFICIAL Transcript(s) MUST BE RECEIVED if you are selected, and prior to receiving the firm offer with a start date.

Cover Letters are not mandatory and will not be used to verify experience but may be submitted.

Reference the Education Section for College Transcript and Evaluation of Foreign Education.

Do not upload password-protected documents.

Applicants selected for employment who are not current DOL employees will be required to provide proof of citizenship, and the E-Verify system will be used to confirm the employment eligibility of all new hires.

As a condition of employment for accepting this position, you may be required to serve a trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:

- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.

Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Next steps