Duties
This position is located within a National Guard aircraft maintenance organization. Its primary purpose is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and non-powered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing.
b. DUTIES:
(1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions.
(2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight.
(3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles.
(4) Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal-to-metal bonding where delamination of surfaces and core material occurs in control surfaces.
(5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and non-powered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures.
(6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables.
(7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development.
(8) Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity.
(9) Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders.
(10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner.
(11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials.
(12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings.
(13) Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents, cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
1. Ability to perform all types of structural repair operations working from blueprints, T.O.s, diagrams, and work orders using machinery which includes, but is not limited to, hand tools, shears, brakes, rolls, dimpling, stretching and shrinking machines, drill presses, grinders, sanders, routers, and tubing benders.
2. Ability to inspect aircraft for cracks, worn components, alignment problems, types and severity of corrosion, while determining the nature and extent of repairs to be made using applicable T.O.s.
3. Ability to make all repairs associated with Aircraft Structural Maintenance, to include structural damage in pressurized and non-pressurized areas, remove and treat corrosion, prep and paint aircraft and its' components, bend tubing, accomplish fiberglass repairs, balance flight controls, and manufacture cables.
4. Skill in making layouts, patterns and templates using recognized trade methods and practices.
5. Ability to independently develop plans and make decisions.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12613097
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.