Duties
As a Sheet Metal Mechanic (Aircraft), WG-3806-10, you will inspect and troubleshoot aircraft structures such as fuselage, tail, wings, cowlings and stabilizers. Determine the nature and extent of repairs to be made using applicable Technical Manuals (TMs) as guidelines. Remove, fabricate, repair, modify, and install parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, fairing, stressed and double contour skins using hand or powered tools and a variety of metal working equipment. Fit and trim components to aircraft such as loading gear doors, ailerons, flaps, engine access doors and similar assemblies. Perform fabrication of local manufactured items required for facility support. Work includes layout, bending, cutting, forming and assembling. Devise and calculate patterns employing the principles of triangulation, radial, and parallel line development. Align component structures and airframe using precision optical measuring instruments, plumline and level.
WORKING CONDITIONS: Subject to danger involved in or resulting from: use of powered shop equipment, high pressure gas cylinders and high electrical voltage; swiftly activated hydraulic or pneumatic metal aircraft assemblies, such as landing gear, speed brakes, flaps, and other components; working near aircraft, jet blast, heat, fuel, oil, high noise levels, icy ramps, wet or slippery surfaces of aircraft and work stands. Subject to cuts and burns, eye strain and skin irritation from fumes, paints, and fluids. Works outdoors and indoors.
PHYSICAL EFFORT: Required to climb, stand, stoop, bend, stretch, and work in tiring and uncomfortable positions. Frequently lifts parts and equipment weighing up to 20 pounds. Occasionally lifts and carries items weighing 50 pounds and over.
Requirements
Conditions of employment
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Security Clearance requirements are determined by position and/or MOS/AFSC compatibility.
- Enrollment in Direct Deposit is mandatory
- APPLICANTS SHOULD CONTACT THEIR STATE INCENTIVES MANAGER TO DETERMINE IF ACCEPTING THIS POSITION WILL AFFECT ANY BONUS RECEIVED FROM THE MILITARY.
Qualifications
AREA OF CONSIDERATION: This position is in the Excepted Federal Civil Service "under the authority of 32 U.S.C. 709" and is open to Category 1: All permanent/indefinite (T32 and T5) technicians employed by the agency Category 3: All current military members of the Florida National Guard; and Category 4: All individuals who qualify for membership in the Florida National Guard and are willing to become T32 Dual Status technicians. First consideration will be given to Category 1.
PCS: Permanent Change of Station (PCS) costs, MAY be authorized. Authorization for payment of PCS expenses will be granted ONLY after determination is made that payment is in the best interest of the Florida National Guard.
Recruitment / Relocation: Incentive MAY be authorized. ONLY after determination is made that payment is in the best interest of the Florida National Guard.
FLARNG BUS Code NG5022: This position is "included" in the bargaining unit and eligible for labor organization representation. The current exclusive representative is The Association of Civilian Technicians, Chapter 87 and the President is Mr. Michael Ortmayer at actch87@gmail.com
MILITARY GRADES: Enlisted; E4 thru E7.
GENERAL EXPERIENCE: Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams.
SPECIALIZED EXPERIENCE:WG-10 must have at least 18 months experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.
Education
If you are using Education to qualify for this position, you must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Required Documents
To apply for this position, you must submit a complete Application Packet which may include the following:
Resume: (must be 2 pages ONLY and must include 3 references)
1. First and Last Name
2. Contact Information (Address, Phone Number and Email)
3. Position Title(s)
4. Company/Organization Name(s)
5. Dates of Employment (MONTH and YEAR)
6. Duties Performed - it is best practice to be specific and focus on the duties performed that are like (similar to/relative to/consistent with) the position you are applying for.
**Please be advised that copying and pasting the specialized experience from the vacancy announcement into your resume is prohibited and will result in your resume being disqualified**
Transcripts: Only a requirement if education is required OR you substitute education for specialized experience Unofficial copies may be submitted for application purposes, but placement will not occur until official transcripts have been provided.
SF-50: If you have previously been employed by another Federal Agency or previously worked for our agency, please submit the most recent Notification of Personnel Action (SF-50).
**This is NOT a requirement for those that have never been employed by a Federal Agency**
DD214s: Most recent DD214 member-4 (If applicable)
Veteran's preference (VA Letter): Most recent Benefit Summary/Service verification Letter (If applicable)
Final Retirement Orders: Appropriate final military orders (Ex: Medical and/or Regular retirement) (If applicable)
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.