SHEET METAL MECHANIC (AIRCRAFT) TITLE 32 PERMANENT Job in Pease AFB, NH

Vacancy No. NH-12686853-AF-25-013 Department Air National Guard Units
Salary $36.82 to $42.97 Grade 10 to 10
Perm/Temp Permanent FT/PT Full-time
Open Date 2/21/2025 Close Date 3/24/2025
Job Link Apply Online Who may apply Status Candidates
Locations:
Pease AFB, NH


Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION

This National Guard position is for a SHEET METAL MECHANIC (AIRCRAFT) TITLE 32 PERMANENT, Position Description Number D1371000 and is part of the NH 157th Maintenance Group, National Guard.

This vacancy is to gather applications that may or may not result in a referral or selection.




Duties

As a SHEET METAL MECHANIC (AIRCRAFT) TITLE 32 PERMANENT, WG-3806-10, you will accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and nonpowered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing.


Requirements

Conditions of Employment

  • NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter PRIOR to applying for this position.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • New Employees will be required to submit a Police Records Check.
  • Participation in direct deposit is mandatory.
  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required PRIOR to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
  • Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade/rank listed in this announcement.
  • THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION

Qualifications

MILITARY REQUIREMENTS

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Military Grades: E3 to E6

Selectee(s) must be within the military grade(s) listed in this job announcement prior to the effective date of placement into the technician position.

Applicant(s) (Enlisted) who are over grade must clearly state, in their resumes, their intentions to willingly take a reduction in grade.

Compatible Military Assignments: 2A7X3

GENERAL EXPERIENCE: Must have experience or training that has provided you with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double, or grooved seams.

SPECIALIZED EXPERIENCE: Must have experience and training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.

MAJOR DUTIES INCLUDE BUT NOT LIMITED TO:

Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions.

Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight.

Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles.

Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal-to-metal
bonding where delamination of surfaces and core material occurs in control surfaces.

Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and nonpowered tools and equipment. Repairs or replaces retaining frames and installs plastic
laminated blanks. Designs and constructs forming fixtures.

Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables.

Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development.

Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity.

Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders.

Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner.

Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials.

Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings.

Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents, cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives.

May operate the wash rack. Accomplishes corrosion and washing inspections within schedule provided to ensure compliance with the monthly and weekly maintenance plan. May conduct training on proper methods and procedures of wash rack operations.

May assist in training of drill status guard members and in maintenance of publication files of applicable technical orders, regulations, manuals and local directives.

Prepares for and participates in various types of readiness evaluations such as MEI, ORI, IG and UE inspections mobility and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue/duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve a member of a team to cope with natural disasters or civil emergencies.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

This agency participates in the Fair Chance Act, Title 5 USC 9202 Limitations on requests for criminal history information. An employee of an agency may not request, in oral or written form (including through the Declaration for Federal Employment (Office of Personnel Management Optional Form 306) or any similar successor form, the USAJOBS internet website, or any other electronic means) that an applicant for an appointment to a position in the civil service disclose criminal history record information regarding the applicant before the appointing authority extends a conditional offer to the applicant. Certain exceptions do apply to this Act.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

Ability To Inspect, Ability To Use and Maintain Tools and Equipment, Knowledge of Metals, and Metal Processing and Metalworking

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. A COMPLETE RESUME IS REQUIRED. Your full name, address, civilian email address (no .gov or .mil) and current telephone number must be on your resume. Your resume must clearly demonstrate experience that meets the requirements of this position. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Your resume must show experience where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (Mo/Yr), hours per week & salary. Incomplete resumes will result in the applicant not being considered for the position.

2. References must be submitted with the application packet. (Minimum of 3 references required)

3. Prior/current Federal employees are required to submit their most recent SF 50 with their packet. The SF-50(s) must reflect the highest grade and step held in Federal Service that demonstrates one year time in grade.

4. A complete application package, including all supporting documents (i.e., resumes, copies of transcripts if required, licenses, All FAA Certifications and Credentials, and any other supporting documents etc.), must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

5. Copies of transcripts (if required) must be provided at the time of submission with the application packet. Failure to do so will result in the applicant not being considered for the position. Selected individual may be required to provide official transcripts prior to placement into this position.

PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Human Resources WILL NOT divulge if you are qualified or not for the position. Incomplete packets will not be considered for the position.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.



To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Doreen Sears
Address
NH 157th Maintenance Group
157th MXG
Pease ANGB, NH 03803-0157
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements