SHEET METAL MECHANIC (AIRCRAFT)(Title 32) Job in Windsor Locks, CT

Vacancy No. CT-12767315-AR-25-077 Department Army National Guard Units
Salary $37.85 to $44.17 Grade 10 to 10
Perm/Temp Permanent FT/PT Full-time
Open Date 7/22/2025 Close Date 8/5/2025
Job Link Apply Online Who may apply Status Candidates
Locations:
Windsor Locks, CT


Summary

THIS IS A TITLE 32 DUAL STATUS POSITION

DUTY LOCATION: Army Aviation Support Facility (AASF), Windsor Locks, CT

AREA(S) OF CONSIDERATION:

Area 1: All currently employed full-time permanent and indefinite personnel, assigned to the AASF or the TASMG of the Connecticut Army National Guard.

Duties

JOB SUMMARY: The purpose of this position is to perform sheet metal maintenance on aircraft and components.

NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Army National Guard.

The major duties include, but are not limited to:

  • Inspects aircraft and determines nature and extent of repairs to be made using applicable Technical Manuals (TMs) as guidelines.
  • Repair cracks in aircraft skin.
  • Sets up, operates and maintains power shears, metal brakes, rolls, dimpling machines, drills, saws, heat-treating furnaces, hardness testers, arc and oxyacetalene welders and other metal working equipment and tools of the trade.
  • May paint, strip or stencil aircraft and/or components.
  • May assist in other functions within the Component Repair Shop in the accomplishment of mission requirements.

WORKING CONDITIONS: Subject to danger involved in or resulting from: use of powered shop equipment, high pressure gas cylinders and high electrical voltage; swiftly activated hydraulic or pneumatic metal aircraft assemblies, such as landing gear, speed brakes, flaps, and other components; working near aircraft, jet blast, heat, fuel, oil, high noise levels, icy ramps, wet or slippery surfaces of aircraft and work stands. Subject to cuts and burns, eye strain and skin irritation from fumes, paints, and fluids. Works outdoors and indoors.

PHYSICAL EFFORT: Required to climb, stand, stoop, bend, stretch, and work in tiring and uncomfortable positions. Frequently lifts parts and equipment weighing up to 20 pounds. Occasionally lifts and carries items weighing 50 pounds and over.

Requirements

Conditions of Employment

  • National Guard Membership is required.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • Must meet Compatible Military Assignment within one year from placement.
  • Wear of the military uniform is mandatory.
  • Direct Deposit is mandatory.
  • Must be able to obtain and maintain a secret security clearance.
  • Must possess a valid state drivers license.

Qualifications

GENERAL EXPERIENCE: Experience that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams.

SPECIALIZED EXPERIENCE: Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 18 months of specialized experience in the following:
  • Experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams.
  • Experience using more complicated shop tools and equipment.
  • Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys.
  • Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.

KNOWLEDGE, SKILLS AND ABILITIES:
  • Ability to plan, construct, assemble, disassemble, repair, fabricate, and install irregular items and systems having combined shapes to exacting tolerances using the least number of seams and amount of metal.
  • Ability to work independently from written or oral instructions, blueprints, sketches, or personal inspection of items or systems to be manufactured or repaired.
  • Ability to independently develop plans and make decisions.
  • Skill in making layouts, patterns and templates using recognized trade methods and practices.
  • Knowledge of and skill in the selection and use of special sheet metal tools and equipment without instructions, and to develop modifications to prototype or test equipment.

COMPATIBLE MILITARY ASSIGNMENT: All applications will be considered regardless of Branch/AOC/FA/MOS. Incumbent will be required to be assigned to compatible military position within 1 year of selection. The selected individual may be required to attend formal technician school training.

MILITARY GRADE (Prior to Application): Enlisted: E-1 through E-8
UNIT OF ASSIGNMENT: Any aviation unit in state

SPECIAL REQUIREMENTS: This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. This position requires a security clearance (secret) which the applicant must possess or be able to obtain a clearance within one year of appointment. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.

CONDITION OF EMPLOYMENT: Training at the National Guard Professional Education Center (NGPEC) is a mandatory condition of employment, subject to availability of resources. NGB prescribed courses at NGPEC must be completed within 6 months of assignment to this position. Failure to complete course(s) may result in reassignment or termination of full-time employment unless extenuating circumstances preclude course attendance.

Education

No substitution of education for specialized experience.

Additional information

Primary Change of Station (PCS) relocation expenses will NOT be paid.

To ensure compliance with an applicable preliminary nationwide injunction, which may be supplemented, modified, or vacated, depending on the course of ongoing litigation, the Federal Government will take no action to implement or enforce the COVID-19 vaccination requirement pursuant to Executive Order 14043 on Requiring Coronavirus Disease 2019 Vaccination for Federal Employees. Therefore, to the extent a Federal job announcement includes the requirement that applicants must be fully vaccinated against COVID-19 pursuant to E.O.14043, that requirement does not currently apply. Federal agencies may request information regarding the vaccination status of selected applicants for the purposes of implementing other workplace safety protocols, such as protocols related to masking, physical distancing, testing, travel, and quarantine.

This position is represented by the Association of Civilian Technicians, Chapter 98.

Under 32 U.S.C. 709, Veterans Preference does NOT apply.

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program (incentives). In order to avoid losing your incentive eligibility, you should check with your serving incentive manager (CTARNG-G1 or CTANG-Retention Office) prior to accepting an offer for the position. For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program, the following termination rule applies:

Incentive Termination without Recoupment: If you accept a Military Technician (Mil Tech) Permanent position where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment as long as you have served at least 6 months of the bonus contract following receipt of the initial bonus payment.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Please ensure you follow all instructions carefully. Once the application process is complete, a review of your resume and supporting documentation will be made and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. Applicant must ensure resume and any other required supporting documentation clearly portrays that s/he meets the required experience level for the position. Please ensure your resume accurately reflects the duties and responsibilities under each position you have held with each employer. In describing your experience, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry (beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week). If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified and you will no longer be considered for this position.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

  • Resume showing relevant experience
  • Responses to the Assessment Questionnaire
  • Unofficial Transcripts, if used to qualify (An official transcript may be required before being hired.)

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.

A complete application package must be submitted by 08/05/2025 on to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/. You may also check the status of your application by contacting the phone number or email address listed in the Agency Contact Information below.

Agency contact information

Staffing Office
Address
CT AASF
Bradley International Airport
Windsor Locks, CT 06096
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

Thank you for your interest in the Connecticut National Guard!


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements