SHEET METAL WORKER (AIRCRAFT)

Department of the Navy

Naval Air Systems Command

Summary

This is a public notice flyer to notify interested applicants of anticipated vacancies through the DHA for Domestic Def Ind Base Facilities & Major Range/Test Facilities Base in DOD.. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

This job is open to

The public

U.S. Citizens, Nationals or those who owe allegiance to the U.S.

Clarification from the agency

U.S. CITIZENS

Duties

You will disassemble, repair, assemble, modify, measure, and/or check, as required, to process aircraft, aircraft engine structures, components, assembles, and/or sub-assemblies.
You will perform a variety of metal repair, fabrication, plan, layout and structural disassembly/assembly of aircraft and aircraft components.
You will work with plastics and various metals and apply knowledge of basic level shop mathematics.
You will work from drawings, manuals, technical directives, instructions and at times, under the guidance of a higher-graded mechanic.

Requirements

Conditions of employment

Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Males born after 12-31-59 must be registered for Selective Service.
This is a bargaining unit position.
You will be required to successfully complete a pre-appointment physical examination.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
You will be required to lift and carry objects up to 45 lbs. Any weight to be lifted in excess of 40 lbs. will not be attempted unaided.
You will be subject to various noise levels which continuously exceeds 85 DBA. Hearing protection will be required for noise levels of 85 DBA and double protection will be required for noise levels over 105 DBA.
This position requires near vision correctable at 14" to Jaegar 2 and far vision correctable in one eye 20/20 and to 20/40 in the other. You must be able to distinguish colors and depth perception.
This position may require climbing which could exceed heights of 20 feet or more.
You must obtain and maintain required certification and/or license as a condition of employment.
Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.

Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below:

This job has a screen-out element which will be used to determine minimum eligibility for this job. The Screen-out for this position is performing the following tasks: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION such as:

Working from drawings, manuals, technical directives, instructions, and at times, under the guidance of a higher-graded mechanic;
Performing a variety of metal repair, fabrication, plan, layout, and structural disassembly/assembly of aircraft and aircraft components;
Using hand power tools (drills, rivet, guns, routers, etc.), and metal working hand tools (snips, punches, files, plier, hammers, mallets, etc.) and/or working with hand or power press brakes, shears, shrinking and stretching tools, hydraulic presses, sanders or machines in the process or repairing, manufacturing or modifying aircraft or aircraft engine assemblies or parts;
Checking and realigning components using available jigs and fixtures after replacing structural parts or reinstalling fittings. Incumbent uses measuring instruments such as steel rules, drill gauges, compasses, and other precision-measuring devices; and
Applying knowledge of basic level shop mathematics to calculate and scribe patterns and apply principles of parallel or radial line development and triangulation.

Additional qualification information can be found from the following Office of Personnel Management website: Federal Wage System Qualifications

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

This job does not have an education qualification requirement.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Several vacancies may be filled.

This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.

The position often requires irregular hours.

This position requires rotating shift work.

This position requires evening and weekend work.

This position requires exposure to high noise levels.

Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf.

Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.

Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPL. A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

As vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyer. You will be rated based on the information provided in your resume, along with your supporting documentation.

If selected, you may be required to provide additional supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All qualification requirements must be met before being considered for any vacancies.

Required Documents

A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume.

Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package.

Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified.

Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor

Are you a disabled veteran or claiming 10-point veterans' preference?
If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.

You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf.

Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).

Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you mustprovide unredacted originals.

How to Apply

Interested Applicants must submit resumes/application packages to:

Christine Sanchez - christine.l.sanchez2.civ@us.navy.mil

Facsimile applications will not be considered.

All resumes/applications must be received no later than the close date of this flyer. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered.

It is the applicant's responsibility to verify that all information in their resume and documents, are received, legible, and accurate. HR will not modify answers/documents submitted by an applicant.

Failure to submit a complete application package will result in an ineligible rating and loss of consideration.

Agency contact information

Christine Sanchez

Email: christine.l.sanchez@navy.mil

Address: FLEET READINESS CENTER SOUTHWEST
Fleet Readiness Center Southwest
PO Box 347058
San Diego, CA 92135-7058
US

Next steps

Qualified applicants will be referred to the hiring manager. The selecting official may choose to conduct interviews.

Our evaluation will be based on the information you provide. You should expect that we will verify performance, suitability, and security information and take that information into account in making employment offers.

SHEET METAL WORKER (AIRCRAFT) Job in Naval Air Station San Diego, CA