• Works with the Division Chief in planning, organizing, and overseeing the activities of the division.
• Participates with the Division Chief in the exercise of supervisory personnel management responsibilities.
• Serves as the command focal point for the built infrastructure investment strategies and policies.
• Engages monthly with AFCEC and AFIMSC, other MAJCOM A4Cs and HAF staff to ensure AETC equities are being represented at the appropriate Working Groups, Boards and Councils.

Conditions of employment

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft/vehicle to conferences, meetings, or functions away from the duty office/location. Travel may include overnight stays.
• Position is Supervisory; A 1-year supervisory probationary period will be required, if not previously met.
• Must be able to obtain and maintain a Secret security clearance.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. (cont.)
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• This position is designated as a key position IAW AFI 36-507. Duties of this position are essential to the accomplishment of wartime/contingency operations.
• The duties of this position meet all requirements as a category 4 designation, and shall not be vacated during a national emergency or mobilization without seriously impairing (cont.)
• the capability of the parent Federal Agency or office to function effectively. This position must be removed from the Ready Reserve and cannot become a member of the Ready Reserve. (IAW: DoDD 1200.7, "Screening the Ready Reserve,")

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, General Engineering Series, 0801, Professional Scientific Positions.

BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:
Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: You must submit a copy of transcripts with your application.

OR

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-13, or equivalent in other pay systems. Examples of specialized experience includes the direction of a major command level organization that provides direction, staff advice, and assistance to subordinate installations in Civil Engineering Enterprise. Ability to produce a prioritized 1-N list for MILCON, UMMC, and FSRM programs for AETC, to complete at the Headquarters AF level. Participates in providing both technical and administrative direction to subordinate branch chiefs and through them their assigned non-supervisory employees. Reviews and structures organization to optimize use of resources and maximize efficiency and effectiveness of the organization.

FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-13 level is required to meet the time-in-grade requirements for the GS-14 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Knowledge of the policies, principles, concepts, guidance, procedures, techniques, and methodologies pertaining to mobility and expeditionary engineering infrastructure and airfields, geospatial integration and analysis, explosive ordnance disposal, fire emergency services, emergency management, and engineer functional area management (FAM) and readiness reporting.

2. Knowledge of the mission, roles, functions, organizational structures, and operation of DOD and Air Force organizations to provide command level staff guidance and engineering concepts, principles, and practices in two or more disciplines including mechanical, electrical, civil, fire protection, life safety, energy, familiarity with architecture and planning disciplines, and knowledge of existing and applicable software applications in the functional area of responsibility to effectively manage engineering functions to support AETC's mission.

3. Skill in identifying rules, principles, or relationships that explain facts, data, or other information; analyzes information and makes correct inferences or draws accurate conclusions. Utilize these skills as a supervisor to further influence, motivate, and challenge others; adapt leadership styles to a variety of situations.

4. Ability to plan, organize, and direct the functions and supervise, mentor, motivate, and appraise the staff of an organization through subordinate supervisors.

5. Ability to analyze, plan, and adjust work operations of subordinate organizational segments to meet program requirements and objectives within available resources.

6. Ability to communicate, both orally and in writing, clearly, concisely, and with technical accuracy.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

For additional information on what to include in your resume, click here.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Applicants who disqualify themselves will not be evaluated further.

The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.

1. Online Application: Questionnaire
2. Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply".
3. Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
4. Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
5. Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
6. Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).

ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:

• Name/Rank/Grade of Service Member
• Branch of Armed Forces
• Dates of Active Service (Start and End Date(s)
• Expected Date of Discharge/Release from Active Duty
• Terminal leave start date (if applicable)
• Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
• Must be certified within 120 days of anticipated discharge
• Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.

Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.

OPTIONAL DOCUMENTS:
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.
Note: Applicant must not submit award Notification of Personnel Actions (SF50s).

Next steps