Duties
(1) Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.). May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. May assist higher-graded inspectors to perform inspections on equipment repairs.
(2) Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
(3) Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
(4) Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).
(5) Performs other duties as assigned.
Requirements
Conditions of Employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.
Military Grades: Enlisted
Minimum Grade - SPC (E-4)
Maximum Grade - SFC (E-7)
Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard.
IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.
ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION
Qualifications
GENERAL EXPERIENCE:
Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work
SPECIALIZED EXPERIENCE:
Experience or training leading to an extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems. Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, general and specialized experience):
- Ability to apply a wide variety of complex inspection techniques to examine a variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.); that may include inspection of heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity.
- Ability to inspect complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition.
- Ability to operate a large variety of test equipment, some of which is specially designed to test complex interrelated mechanical/electrical/ hydraulic/pneumatic systems.
- Ability to use specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
DO NOT COPY THE SPECIALIZED EXPERIENCE AND DUTIES WORD FOR WORD AND PLACE INTO YOUR RESUME; YOU MUST DESCRIBE YOUR PERSONAL EXPERIENCE AS IT PERTAINS TO EACH STATEMENT.
2. Individual Medical Readiness (IMR) dated within 18 months: Can be obtained from Army Knowledge Online (AKO)/Self Service/My Medical Readiness. Click on any "View Detailed Information" selection, then select your IMR Record. Please ensure that you are uploading a PDF DOCUMENT, not a screen shot. PHA MUST BE DATED WITHIN 18 MONTHS AS OF THE CLOSING DATE OF THIS ANNOUNCEMENT!!!
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.