SURFACE MAINTENANCE MECHANIC LEADER - TITLE 32 Job in Fort Stewart, GA

Vacancy No. GA-12698518-AR-25-118 Department Army National Guard Units
Salary $32.02 to $37.33 Grade 11 to 11
Perm/Temp Permanent FT/PT Full-time
Open Date 2/25/2025 Close Date 3/11/2025
Job Link Apply Online Who may apply Status Candidates
Locations:
Fort Stewart, GA


Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

This position is for a Surface Maintenance Mechanic Leader, Position Description Number D1288000 located in the Joint Forces Headquarters-Georgia, Logistics Directorate (J-4), Surface Maintenance Facility at MATES in Ft. Stewart, Georgia..

This is a full-time, Excepted Permanent, dual status position which requires Georgia Army National Guard Membership.

Area of Consideration: Current members of the Georgia Army National Guard.

This job is open to

Clarification from the agency

Current members of the Georgia Army National Guard.

Duties

As a Surface Maintenance Mechanic Leader, WL-5801-11, you will:

Insure that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations.

Troubleshoot major repairs on heavy-duty mobile equipment, combat, tactical, and automotive vehicles.

Review work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines.

Interpret work instructions and assists lower graded repairers or trainees in the more difficult and complex tasks.

Provide information to the supervisor on status and progress of work, causes of delays, and overall work operations and problems.

Perform maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles.

Utilize embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair.

Conduct readiness and repair inspections on vehicles and associated equipment supported by the activity.

Perform other duties as assigned.

Requirements

Conditions of Employment

  • NATIONAL GUARD MEMBERSHIP IS REQUIRED
  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • Participation in direct deposit is mandatory.
  • For positions requiring the operation of motor vehicles, candidates must have a valid state driver’s license.
  • Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.

Qualifications

Each applicant must fully substantiate (in her/his own words) that they meet the requirements of the specialized experience listed below; otherwise, the applicant will be considered unqualified for this vacancy. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. IF YOU DO THIS YOU WILL BE CONSIDERED UNQUALIFIED FOR THE VACANCY. Please ensure that you have included beginning and ending dates (month and year) for all jobs listed on your resume.

Military Grades: SSG-W01.

Compatible Military Assignments: ECMF: 12, 13, 14, 19, 25, 88, 91, 92, or 94
WOBR: 12, 13, 14, 19, 25, 91, 92, or 94
WOBR: 882A

General Experience: Experience that has provided the candidate with sufficient knowledge to complete the work of this occupational series. Experience or training which demonstrates the candidates ability to lead other technicians engaged in the duties performed by this occupational series.

Specialized Experience: Candidate must have 36 months specialized experience in addition to the journeyman level knowledge, experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series.

PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights.

WORKING CONDITIONS: Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.

Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment.

Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles and equipment.

Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems.

Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.

Knowledge of electronics, sufficient to utilize state of the art diagnostic equipment to identify and replace defective components, such as electronic control modules, line replacement units, chips, sensors, printed circuit boards, and other standard components.

Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.

Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer state of the art computerized diagnostic equipment and embedded diagnostics. Knowledge and understanding of how measurements and tolerances impact on the mechanical, hydraulic, pneumatic, electronic, and electrical systems and the components of each system.

Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link:https://apply.usastaffing.gov/ViewQuestionnaire/12698518

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.


To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

David Drew
Address
GA MATES
1714 TROUPE AVE
FT STEWART, GA 31314
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements