Requirements
Conditions of Employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.
Military Grades: Enlisted
Minimum Grade - PVT (E-1)
Maximum Grade - SFC (E-7)
Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard.
IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.
ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION
Qualifications
GENERAL EXPERIENCE:
Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work.
SPECIALIZED EXPERIENCE:
In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series.
Education
DUTIES CONTINUED;
- Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
- Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.
- Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
- Performs other duties as assigned.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, general and specialized experience):
- Extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment.
- Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles and equipment.
- Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems.
- Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.
- Knowledge of electronics, sufficient to utilize state of the art diagnostic equipment to identify and replace defective components, such as electronic control modules, line replacement units, chips, sensors, printed circuit boards, and other standard components.
- Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
- Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer state of the art computerized diagnostic equipment and embedded diagnostics. Knowledge and understanding of how measurements and tolerances impact on the mechanical, hydraulic, pneumatic, electronic, and electrical systems and the components of each system.
- Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs.
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
DO NOT COPY THE SPECIALIZED EXPERIENCE AND DUTIES WORD FOR WORD AND PLACE INTO YOUR RESUME; YOU MUST DESCRIBE YOUR PERSONAL EXPERIENCE AS IT PERTAINS TO EACH STATEMENT.
2. Individual Medical Readiness (IMR) dated within 18 months: Can be obtained from Army Knowledge Online (AKO)/Self Service/My Medical Readiness. Click on any "View Detailed Information" selection, then select your IMR Record. Please ensure that you are uploading a PDF DOCUMENT, not a screen shot. PHA MUST BE DATED WITHIN 18 MONTHS AS OF THE CLOSING DATE OF THIS ANNOUNCEMENT!!!
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.