SURFACE MAINTENANCE MECHANIC (Title 32) Job in Windsor Locks, CT

Vacancy No. CT-12736987-AR-25-052 Department Army National Guard Units
Salary $30.67 to $35.80 Grade 11 to 11
Perm/Temp Permanent FT/PT Full-time
Open Date 5/21/2025 Close Date 6/4/2025
Job Link Apply Online Who may apply Status Candidates
Locations:
Windsor Locks, CT


Summary

THIS IS A TITLE 32 DUAL STATUS POSITION

DUTY LOCATION: Combined Support Maintenance Shop (CSMS), Windsor Locks, CT

AREA(S) OF CONSIDERATION:
Area 1: All currently employed full-time permanent and indefinite personnel of the Connecticut Army National Guard.
Area 2: All currently employed full-time temporary technician personnel and all current traditional members of the Connecticut Army National Guard.

Duties

JOB SUMMARY: The purpose of this position is to troubleshoot, repair, maintain, inspect, and/or overhaul a variety of complex combat, tactical, commercial, and special purpose vehicles and equipment having complicated mechanical and non-mechanical systems with a variety of interconnected systems. Provides technical guidance and specialized team leadership to lower grade employees.

NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Army National Guard.

The major duties include, but are not limited to:

  • Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles.
  • Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools.
  • Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems.
  • Independently performs repairs and maintenance functions with little or no supervision in remote locations.
  • Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity.

WORKING CONDITIONS: Work is performed inside and outside. When inside, incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be worn or used for long periods.

PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights.

Requirements

Conditions of Employment

  • National Guard Membership is required.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • Must meet Compatible Military Assignment within one year from placement.
  • Wear of the military uniform is mandatory.
  • Direct Deposit is mandatory.
  • Must possess a valid state drivers license.

Qualifications

GENERAL EXPERIENCE: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work.

SPECIALIZED EXPERIENCE: Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 18 months of specialized experience in the following:
  • Experience or training diagnosing, repairing, overhauling, and modifying more complex vehicles, equipment, and more complicated systems.
  • Experience which has provided a thorough knowledge of diagnostic equipment.
  • Experience applying independent judgment in determining methods and techniques required to solve unusually complex maintenance and repair problems.
  • Experience in testing, inspecting, and evaluating the work performed on vehicles, equipment and systems.

KNOWLEDGE, SKILLS AND ABILITIES:
  • Knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment.
  • Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles and equipment.
  • Knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems.
  • Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.
  • Knowledge of electronics, sufficient to utilize state of the art diagnostic equipment to identify and replace defective components, such as electronic control modules, line replacement units, chips, sensors, printed circuit boards, and other standard components.
  • Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
  • Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment.
  • Ability to operate and understand original equipment manufacturer state of the art computerized diagnostic equipment and embedded diagnostics.
  • Knowledge and understanding of how measurements and tolerances impact on the mechanical, hydraulic, pneumatic, electronic, and electrical systems and the components of each system.
  • Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs.

COMPATIBLE MILITARY ASSIGNMENT: All applications will be considered regardless of Branch/AOC/FA/MOS. Incumbent will be required to be assigned to compatible military position within 1 year of selection. The selected individual may be required to attend formal technician school training.

MILITARY GRADE (Prior to Application): Enlisted: E-2 through E-7
UNIT OF ASSIGNMENT: Any unit within the state

SPECIAL REQUIREMENTS: This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.

CONDITION OF EMPLOYMENT: Training at the National Guard Professional Education Center (NGPEC) is a mandatory condition of employment, subject to availability of resources. NGB prescribed courses at NGPEC must be completed within 6 months of assignment to this position. Failure to complete course(s) may result in reassignment or termination of full-time employment unless extenuating circumstances preclude course attendance.

Education

No substitution of education for specialized experience.

Additional information

Primary Change of Station (PCS) relocation expenses will NOT be paid.

To ensure compliance with an applicable preliminary nationwide injunction, which may be supplemented, modified, or vacated, depending on the course of ongoing litigation, the Federal Government will take no action to implement or enforce the COVID-19 vaccination requirement pursuant to Executive Order 14043 on Requiring Coronavirus Disease 2019 Vaccination for Federal Employees. Therefore, to the extent a Federal job announcement includes the requirement that applicants must be fully vaccinated against COVID-19 pursuant to E.O.14043, that requirement does not currently apply. Federal agencies may request information regarding the vaccination status of selected applicants for the purposes of implementing other workplace safety protocols, such as protocols related to masking, physical distancing, testing, travel, and quarantine.

This position is represented by the Association of Civilian Technicians, Chapter 98.

Under 32 U.S.C. 709, Veterans Preference does NOT apply.

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program (incentives). In order to avoid losing your incentive eligibility, you should check with your serving incentive manager (CTARNG-G1 or CTANG-Retention Office) prior to accepting an offer for the position. For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program, the following termination rule applies:

Incentive Termination without Recoupment: If you accept a Military Technician (Mil Tech) Permanent position where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment as long as you have served at least 6 months of the bonus contract following receipt of the initial bonus payment.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Please ensure you follow all instructions carefully. Once the application process is complete, a review of your resume and supporting documentation will be made and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. Applicant must ensure resume and any other required supporting documentation clearly portrays that s/he meets the required experience level for the position. Please ensure your resume accurately reflects the duties and responsibilities under each position you have held with each employer. In describing your experience, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry (beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week). If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified and you will no longer be considered for this position.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

  • Resume showing relevant experience
  • Responses to the Assessment Questionnaire
  • Unofficial Transcripts, if used to qualify (An official transcript may be required before being hired.)

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.

A complete application package must be submitted by 06/04/2025 on to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/. You may also check the status of your application by contacting the phone number or email address listed in the Agency Contact Information below.

Agency contact information

Staffing Office
Address
CT CSMS
Camp Hartell
Windsor Locks, CT 06096
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

Thank you for your interest in the Connecticut National Guard!


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements