Duties
This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to perform limited diagnosis, routine repairs, and maintenance on combat, tactical, commercial, and special purpose vehicles and equipment.
WG08 DUTIES:
Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic
transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems.
Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc.
WG10 DUTIES:
Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls.
Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair.
Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems.
Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps.
Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT).
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a trial period.
- Participation in direct deposit is mandatory.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; overtime may be required.
- The duties and responsibilities of your job may significantly impact the environment.
- You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- Upon accepting this position, the employee may be required to serve up to a two-year probationary period.
Qualifications
MILITARY GRADES: E-4 through E-8 or WO1 through CW3
GENERAL EXPERIENCE:
Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work.
SPECIALIZED EXPERIENCE:
WG08:
Experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs.
Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories.
Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments.
Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships.
Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
Basic knowledge and understanding of the mechanical makeup, operation, and working relationships of individual systems, and their interrelationships for a variety of combat, tactical, commercial, automotive, special purpose vehicles and equipment.
Working knowledge of various techniques for removing, adjusting, replacing, cleaning, and installing parts and components of combat, tactical, commercial, automotive, special purpose vehicles and equipment.
Basic understanding of electrical, electronic, hydraulic, pneumatic, and other non-mechanical system theories; and skill to replace, fit, install, and adjust systems.
Skill to use basic test equipment and ability to analyze test results to determine fault for repair or replacement of improperly functioning parts or components. Ability to use basic tools common to the occupation.
Ability to determine when parts should be cleaned, reinstalled, or replaced with standard parts.
Ability to read and interpret parts list, manufacturer's repair manuals, technical manuals, diagrams, engineering drawings, and schematics.
WG10:
Experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment.
Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment.
Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems.
Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.
Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards.
Ability to repair or overhaul major components such as diesel, multi -fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
Thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment.
Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles and equipment.
Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems.
Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.
Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards.
Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer computerized diagnostic equipment and embedded diagnostics.
Ability to utilize, interpret and apply parts list, manufacturer's repair manuals, technical manuals, diagrams, engineering drawings, diagnostic computer information, and schematics.
Education
There is no substitution of education for specialized experience for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).
This position may be eligible for Union Membership.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.