Clarification from the agency

This position is only open to current Western Area Power Administration employees on a career or career-conditional competitive service appointment.

As a Safety and Occupational Health Manager, you will:

• Oversee and manage the regional Federal Employee Safety and Occupational Health (FESOH) Program, ensuring its comprehensive implementation across diverse activities and multi-state locations.
• Provide expert guidance and advice to regional senior management, line managers, and supervisors on all safety and occupational health matters, focusing on hazard mitigation in power system operations.
• Develop and propose changes to operating policies and procedures to meet program objectives and ensure compliance with safety standards, particularly concerning high-voltage transmission systems.
• Conduct risk assessments of job tasks and processes to identify potential hazards, evaluate their severity, and determine prevention strategies.
• Ensure regional compliance with Occupational Safety and Health Administration (OSHA) requirements, federal, state, and Department of Energy (DOE) regulations, and relevant industry consensus standards.
• Lead or participate in incident investigations for OSHA-reportable accidents and act as a subject matter expert in high-voltage electrical safety work practices.

Conditions of employment

• Must be a U.S. Citizen or National.
• This employer participates in the e-Verify program.
• Males born after 12/31/1959 must be registered for Selective Service.
• Suitable for Federal employment, as determined by a background investigation.
• May be required to successfully complete a probationary/trial period. Employees serving on a probationary or trial period may be terminated at any time during the probationary or trial period for performance, conduct, or business-related reasons in the interest of Federal service.
• Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications.
• In accordance with Executive Order 14170, applicants are encouraged to respond to the four short, free-response, essay questions in the questionnaire. Answers to these questions are not scored or rated. Your answers will be reviewed by the hiring manager and agency leadership if you are referred for selection consideration.
• Shift work and emergency overtime may be required.

Qualifications

Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards. This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy.

This position has a IOR (Individual Occupation Requirement)EDUCATION:

Undergraduate and Graduate Education: Major study -- safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology.

OR

EXPERIENCE:

General Experience (for GS-5 positions): Experience in scientific or technical work that provided an understanding of the basic principles and concepts of the safety and occupational health field. Creditable general experience must have demonstrated the achievement of knowledge equivalent to the education described above.

Specialized Experience (for positions above GS-5): Experience in or related to safety and occupational health that provided the specific knowledge, skills, and abilities to perform successfully the duties of the position. Examples of qualifying specialized experience include:

• Managing safety or occupational health program elements.
• Developing and recommending safety and occupational health policy to higher levels of management.
• Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements.
• Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards.
• Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses.
• Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards.
• Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards.
• Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards.
• Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects.
• Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse.

OR

Certification: Certification as a Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or Certified Health Physicist (CHP), or similar certification that included successful completion of a written examination that meets the requirements for GS-5. Applicants may also qualify for higher grade levels based on their education and/or experience.

In addition to the Individual Occupational Requirements, you must also meet the requirements below.

SPECIALIZED EXPERIENCE: Applicants must possess one (1) year (52 weeks) of specialized experience equivalent in difficulty and responsibility to the next lower grade level in the Federal service. Specialized experience is experience that has equipped the applicant with the particular knowledge, skills, and abilities to successfully perform the duties of the position. The experience need not have been in the federal government.To be qualified at the GS-13: Applicants must have one (1) year (52 weeks) of specialized experience at the GS-12 grade level or equivalent pay band in Federal Service. This experience includes:

• Contributed to the development and delivery of safety briefings or informational sessions for employees.
• Helped to investigate workplace incidents to understand their causes and prevent them from happening again.
• Identified potential safety risks in workplaces, such as electrical hazards or equipment operation, and suggested basic solutions to reduce accidents.

Time-in-Grade: Current career or career-conditional GS employees of the Federal government, or former career or career-conditional GS employees, who have a break in service of less than one year, are required to meet the time-in-grade restriction of one year of Federal experience at the next lower grade, with few exceptions outlined in 5 CFR 300.603(b). Note: Time-In-Grade requirements also apply to current career or career-conditional federal employees applying for a Veterans Employment Opportunities Act of 1998 (VEOA) appointment.

Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the application process is complete, the first two pages of your resume and supporting documentation will be used to determine whether you meet the job qualifications.

Structured Resume Review: Subject matter experts (SMEs) will review your resume to determine your technical qualifications for this position based on the required competencies. SMEs will review ONLY the first two (2) pages of your resume. SMEs will not review additional information beyond your resume (e.g., cover letter, links embedded in your resume).

The Department of Energy uses an application tracking system to evaluate the scores provided from the SME resume review to place you into an initial quality category via OPM's Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified.

Minimum Qualifications: Once the application process is complete, the Human Resources Offices or Subject Matter Expert (SME) will review the first two pages of your resume and supporting documentation to determine whether you meet the minimum job qualifications.

If your resume is incomplete or does not support the responses you provided in your online questionnaire, or if you fail to submit all required documentation before the vacancy closes, you may be rated 'ineligible', 'not qualified', or your score may be adjusted accordingly.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

• Influencing/Negotiating
• Public Safety and Security
• Safety Engineering
• Technical Competence

All qualified Non-competitive applicants and the best qualified Merit Promotion applicants will be referred to the hiring manager for consideration.

Career Transition Assistance Programs: To receive selection priority for this position, you must: 1) meet the eligibility criteria; and 2) be rated "well-qualified".You must meet all qualifications and eligibility requirements by the closing date (03/16/2026) of this announcement.

To preview the Assessment Questionnaire, click https://apply.usastaffing.gov/ViewQuestionnaire/12900479.

To apply for this position, you MUST provide a complete application package which includes:

• Your two (2) page RESUMEshowing all relevant work experience (paid and unpaid) including: duties performed; full name and address of the each employer; start and end dates (month/day/year); work schedule (part-time, full-time, number of hours if intermittent); salary; and any completed education and training (program title, subject area, number of hours completed, and completion date).
• Transcripts, if specific educational requirements are indicated in this job announcement. Unofficial transcripts or any report listing institution, course title, credits earned (semester or quarter hour) and final grade is acceptable. It is your responsibility to provide adequate proof that you meet the educational requirements.
• Current Federal employees: Most recent NON-AWARD SF-50 (Standard Form 50 - Notice of Personnel Action). To properly verify status eligibility, your SF-50 must show the following. If you do not submit an appropriate SF-50, we cannot verify your status eligibility.
  • Full position title;
  • appointment type;
  • occupational series;
  • pay plan, grade, and step;
  • tenure code; and
  • service computation date (SCD).
  • If your current position SF50 does not indicate you have competitive service status or does not reflect the pay plan and grade of the highest position you have held in the competitive service, in addition to your current SF50, you must provide your previous SF-50s that provide the proof of competitive status and highest grade held on a permanent basis. . If you do not submit an appropriate SF-50, we cannot verify your status eligibility.

• Veterans: DD-214 Member Copy 4 showing type of discharge/character of service; current active duty members- certification of expected discharge or release from active duty under honorable conditions dated within 120 days; SF-15 Form and related documentation; VA letter. For more information visit the USAJOBS Help Center & OPM CHCOC website for VOW information.
• Career Transition Assistance Program/Interagency Career Transition Assistance Program documentation, if applicable(e.g., Certification of Expected Separation, Reduction-In-Force Separation Notice, or Notice of Proposed Removal; SF-50 that documents the RIF separation action; and most recent performance appraisal.) For more information see the OPM Guide to Career Transition.

Next steps