Duties
Work includes routine project/program tasks based on established policies, procedures, and guidelines. Managerial duties affect employees in one organizational unit and include setting priorities, assigning tasks, monitoring and evaluating performance, coaching and developing employee capabilities, approving leave, and taking or recommending corrective/disciplinary action as appropriate.
Uses assigned budget, staff, and other resources to accomplish project/program objectives. Manages budget and requests additional resources as needed. Contributes to the budget planning process and project short-term/future needs. Applies a comprehensive knowledge of the technical aspects of the work directed and a detailed understanding of the objectives of the organizational unit.
Performs professional engineering and/or project management work that could be local, limited to one Service Area, or nationally focused. Applies both engineering and management principles and practices while maintaining schedules of review and formulating policy and operating procedures.
Contacts are primarily with organization unit/major subdivision with subordinates, peers, and higher-level managers. May have frequent contacts with customers to explain policies, procedures or projects/ programs.
Established guidelines, policies, and procedures typically govern work. Resolves routine problems independently but consults with higher-level management when existing guidelines are not available or applicable to complex problems.
Individual and organizational performance is typically reviewed periodically by higher level management, often through status reports and organizational performance measures, to ensure timeliness, policy compliance, and alignment with project/program objectives.
Work activities typically impact directly on the objectives of the organizational unit.
Requirements
Conditions of employment
- US Citizenship is required.
- Selective Service Registration is required for males born after 12/31/1959.
- Must submit an SF50 (See Required Documents).
- This position has a positive education requirement. Transcript(s) required.
- Successful completion of a security investigation will be required
- A Supervisory probationary period may be required.
- Interview Policy: One, some, all or none of the applicants may be interviewed
Qualifications
Basic Requirements:
Degree: Professional Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics;
(b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements section above. The courses must be fully acceptable toward meeting the requirements of an engineering program as described above.4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
To qualify for this position, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I (FG/GS-13). Specialized experience is experience gained in an 800 Engineer series position that has equipped you with the particular knowledge, skills, and abilities to successfully perform the duties of the position.
Specialized experience includes: Work experience in any discipline of professional engineering with emphasis on project management skills.
Current FAA employee: You MUST submit a copy of your most recent (non-award) SF-50 including Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. Failure to provide the required documentation by the closing date of this announcement will result in non-consideration for this position.
Incomplete Applications: Please follow all
instructions carefully. Errors or omissions may affect your rating. Your
application/resume must have your official title, grade and series in your work
history.
Applicants should include examples of specialized experience
in their work history.
Qualifications must be met by the closing date of this vacancy
announcement.
Applicants may be asked to verify information on your
application for employment with the FAA.
Failure to submit all required documents by the closing date
of the announcement will result in loss of consideration.
Qualification requirements must be met by the closing date of this vacancy announcement.
For additional information on qualification requirements, please visit the Office of Personnel Management (OPM) website at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/
Education
This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).
Failure to do so will result in loss of consideration.
Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.
Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.
A copy of your unofficial/final college or university transcript MUST accompany your application if you have never held a position in the 800 series with the FAA.
Make sure your resume includes detailed information to support your qualifications and answers to the job questionnaire.
Additional information
We may use this vacancy to fill other similar vacant positions.
Position may be subject to a background investigation.
A one-year probationary period may be required.
The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. www.faa.gov/jobs/workinghere/financial-disclosure-requirements
As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA or Leadership and Management Dimension.
In lieu of providing a KSA narrative response in the text box listed below each Technical Requirement or Leadership and Management Dimension in your work history, please include information that provides specific examples of how you meet the response level or answer you chose. Your work history examples should be specific and clearly reflect the highest level of ability. Your answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate.
All applicants are encouraged to provide NARRATIVES for each "Managerial Selection Factors" and addressed with description and/or level/percentage of experience. Please include specific examples and details which illustrate your knowledge, skills, and abilities. Please include applicable date ranges.
Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Leadership and Management Dimensions listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or priority grouping and referred to the selecting official for consideration.
Security Requirements: Moderate Risk (5): This position requires completion & favorable adjudication of a National Agency Check with Inquiry (NACI) background investigation prior to appointment, unless a waiver is obtained.
This position is in AJW-2W12B. However, this announcement may be used to fill future vacancies in any other of the Technical Operations, Engineering Services offices in the advertised Duty Location.
This is not a bargaining unit position.
Links to Important Information: Locality Pay, COLA
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
If you are not a current FAA employee in an Engineering Series position, you MUST submit your college/univ. transcript by the closing date. Applicants must apply on-line. Faxed, mailed or e-mailed applications cannot be accepted. Additional documents to supplement your application (i.e., transcripts, SF-50, or veteran's documents) may be uploaded in USAJOBS or faxed to (206) 231-4150 on or before the closing date of this announcement. Include your name & the announcement number on each of your faxed pages.
Current FAA employee: You MUST submit a copy of your most recent (non-award) SF-50 including Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. Failure to provide the required documentation by the closing date of this announcement will result in non-consideration for this position.
This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.
College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.
College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.
If selected, official transcripts are required prior to employment.
If you are an FAA employee, you
MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.
If you are an FAA employee, you can access and print your SF-50 from the eOPF system
https://eopf.opm.gov/dot/.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.