Surface Maintenance Mechanic Leader (TITLE 32) Job in American Fork, UT

Vacancy No. UT-25-038-AR-12685919 Department Army National Guard Units
Salary $33.03 to $38.53 Grade 10 to 10
Perm/Temp Permanent FT/PT Full-time
Open Date 2/5/2025 Close Date 2/19/2025
Job Link Apply Online Who may apply Public
Locations:
American Fork, UT


Summary

This National Guard position is for a Surface Maintenance Mechanic Leader (TITLE 32), Position Description Number D1287000and is part of FMS 3A located in American Fork, Utah, with the Utah Army National Guard.

This vacancy priority is those who are current military members of the Utah Army National Guard.

The selecting supervisor for this vacancy is 1SG Randy Jay Prince Jr.

This job is open to

Clarification from the agency

This is a Title 32 excepted position. This job announcement may be used to fill additional vacancies for additional positions vacated during the job bid process. This vacancy priority is those who are current military members of the Utah Army National Guard. Military membership in the UTARNG is required. Applicants must be willing and eligible to immediately enlist in or transfer to the Utah Army National Guard.

Duties

Major Duties: This is not an all-inclusive list

As a Surface Maintenance Mechanic Leader (TITLE 32), WL-5801-10, you will:

  • Assigns work orders to specific crewmembers and selects workers for various jobs on the basis of knowledge, skills, and abilities.
  • Passes on to workers instructions received from the supervisor, demonstrates proper work methods, and starts work.
  • Insures that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations.
  • Works along with other workers and sets pace performing non-supervisory repair work of the same kind and level as that done by the group led.
  • Assures that there is enough work to keep the work crew busy.
  • Checks work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines.
  • Interprets work instructions and assists lower graded repairers or trainees in the more difficult and complex tasks.
  • Provides information to the supervisor on status and progress of work, causes of delays, and overall work operations and problems.
  • Assures that safety and housekeeping rules are followed.
  • Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles.
  • Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc.
  • Performs work in accordance with Modification Work Orders, Technical Manuals, Lubrication Orders, Maintenance Bulletins, Regulations or management policies. Incumbent may repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
  • Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools.
  • Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair.
  • Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
  • Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems.
  • Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures.
  • Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary.
  • Makes adjustments and repairs to electrical and suspension systems.
  • Independently performs repairs and maintenance functions with little or no supervision in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps.
  • Provides technical guidance and specialized team leadership to lower grade employees within the team.
  • Recovers and evacuates inoperable vehicles from the unit location of breakdown.
  • Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity.
  • Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly.
  • Assists in the maintenance of production reports and records, and makes recommendations to the supervisor.
  • Plans, organizes, and performs technical analyses as required or assigned.
  • Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
  • Performs other duties as assigned.

Requirements

Conditions of Employment

MILITARY REQUIREMENTS:

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Military Rank: Enlisted

Compatible Military Assignments: ENL: CMF 12, 13, 14, 19, 25, 88, 91, 92, 94.

  • National Guard Membership is required.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • May be required to successfully complete a probationary period.
  • For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
  • Participation in direct deposit is mandatory.
  • Medical screening will be completed upon selection for hire.
  • Soldiers who accept a technician position may be terminated from the Bonus and Student Loan Repayment Program (SLRP).
  • Must be able to obtain and maintain the appropriate security clearance of the position.
  • This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
  • Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
  • May occasionally be required to work other than normal duty hours; overtime may be required.
  • The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
  • This position is eligible to be in the union: Laborers International Union of North America (LiUNA) Local 1776.

Qualifications

*Your resume must reflect in detail how the duties and responsibilities under each position you have held with each employer meets the below listed general and specialized experience required for the position.

**Must include beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week in order to determine part time vs. full time credit.

Minimum Requirements:
Experience or training that has provided the candidate with sufficient knowledge to complete the work of this occupational series. Experience or training which demonstrates the candidates ability to lead other technicians engaged in the duties performed by this occupational series.

Specialized Experience:
Must have experience leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of
hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
Wage Leader Experience:
Must have experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series.

Education

Not applicable for this position.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). Are advised to meet with education specialist to review contract.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Category Rating: Your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are:

1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Well Qualified: Candidates in this category possess good skills and experience above the minimum requirements for this position.
3. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.

If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified, and you will no longer be considered for this position.

IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please follow all instructions carefully. Errors or omissions may affect your eligibility.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. Resume: resume must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words, employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.

2. Other supporting documents:

  • Applicable documents required for qualification, education, or certification as stated above.
  • Must provide transcripts for education requirements if applicable.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Shaun Harris
Address
UT G4
12953 S Minuteman Dr
Draper, UT 84020
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements