TOOLS AND PARTS ATTENDANT (T32) Job in Birmingham, AL

Vacancy No. AL-12526220-AR-24-253 Department Army National Guard Units
Salary $23.03 to $26.88 Grade 6 to 6
Perm/Temp Permanent FT/PT Full-time
Open Date 9/5/2024 Close Date 10/5/2024
Job Link Apply Online Who may apply Public
Locations:
Birmingham, AL


Job Description (Please follow all instructions carefully)

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

This National Guard position is for a TOOLS AND PARTS ATTENDANT (T32), Position Description Number D0918000and is part of the AL AASF 2, National Guard.

ORGANIZATION: AASF 2, BIRMINGHAM, AL
SELECTING OFFICIAL: CW4 T. JOHNSON


***THIS POSITION MAY BE AUTHORIZED A RECRUITMENT OR RELOCATION INCENTIVE FOR UP TO 25% ALL INCENTIVES MUST BE APPROVED PRIOR TO THE NEW EMPLOYEE IN PROCESSING.***

This job is open to

Clarification from the agency

Title 32 CAT 1- All on board Federal Employees/Technicians within the ALARNG (T32 and T5, Permanent and Excepted Indefinite) CAT 2- Current Army M-Day and Temporary Technicians within ALARNG CAT 3- Applicants willing to become NG T32 DS Technicians and gain ALARNG membership, all current federal employees, all U.S. Citizens

Duties

(1) Identifies user's tools, parts and equipment requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or are in need of repair. Recommends possible substitute or interchangeable items. Sets up, shifts and maintains storage locations. Determines methods of storage, identification, and stock location considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued for a particular job.

(2) Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records. Compiles reports on adjustments of inventory, stock records, spoilage, damage, location changes, and refusal of shipment.

(3) Ensures that tools and equipment are maintained in good condition by performing visual and operating checks. May make minor repairs to tools and equipment, determine when damaged items are too costly to repair, and reports damaged or worn out equipment to superiors.

(4) Determines stock replenishment levels for centrally controlled supplies within funding limitations. Assures that supplies and monies are not wasted through excessaccumulation and that items are on hand in sufficient quantities and at the time required.In addition to established guides and formulas, determines quantities required and timelystock replenishment.

(5) Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available.

(6) Searches for identifying or management data on items of supply. Compares datalisted on documents with reference sources such as federal catalogs, stock lists, or otherpublications. Receives requests needing additional information and compares withreference sources. Searches for stock number, prices, descriptions, and sources ofsupply. Traces part number or type number to identify equipment/item manufacturer.

(7) Reviews supply transactions or provide customer service for urgent critical shortage items. Codes and classifies requisitions, shipping orders, and other documents. Refers requests to other sources of supply or an inventory control point when stock is unavailable and/or cannot be shipped.

(8) Establishes procedures, management of calibration, and testing of Test Measurement and Diagnostic Equipment (TMDE). Establishes procedures, manages, implements and monitors tool room operations. This includes accounting for, issuingand replacing tools.

(9) May assist with processing of hazardous materials by inspecting, receiving, sorting, accounting and classifying hazardous materials such as explosives, toxic chemicals, flammables, gas cylinders, radioactive material and hazardous waste.

(10) Performs other duties as assigned.

Requirements

Conditions of Employment

  • NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
  • May be required to successfully complete a probationary period.
  • Participation in direct deposit is mandatory.
  • May occasionally be required to work other than normal duty hours; overtime may be required.

Qualifications

Military Requirements: This is an excepted service position that requires membership in a compatible military grade in the Alabama Army National Guard. Applicants who are not currently a member of the Alabama Army National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Army National Guard recruiter at 800-464-8273 prior to applying for this position.


MAXIMUM MILITARY RANK: SSG
*Other Requirements: For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.

GENERAL EXPERIENCE: Experience or training which demonstrates the knowledge of trade; ability to apply identification skill (matching specific item names, models, and stock or part numbers with similar specific information at stock locations); ability to use simple hand tools (pliers, screwdrivers, etc.) and to follow oral and written instructions.

SPECIALIZED EXPERIENCE: Experience or training in verifying stock by opening, counting, and visually checking the contents of the containers. Experience in establishing stock location by considering such factors as use, size, shape, and weight of items. Experience in completing stock records by showing the names, quantities, and locations of stock. Experience in identifying correct nomenclature and stock number of items to locate stock for issue. Experience in performing maintenance such as replacing wooden handles on handsaws, changing blades on power saws, and greasing or oiling power and hand tools.

Education

SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.

2. Other supporting documents: SF-50s and DD 214s are recommended, but not required.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12526220

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.


To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Thomas Johnson
Address
AL AASF 2
5700 East Lake Blvd
Birmingham, AL 35217-3599
US
Learn more about this agency

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.