Clarification from the agency

Area of Consideration 1: Current Title 5 and Title 32 permanent or indefinite employees of the Guam Army National Guard. Area of Consideration 2: All other applicants/areas.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The primary purpose of this position is to determine, identify, and select for issue, items described by users in terms of their intended usage; recommending possible substitutes and interchangeable items; determining work sequences, methods, procedures, and techniques for setting up and shifting storage locations; and determining when tools and equipment should be routed to appropriate shops for test, repair, or calibration.

1. Identifies user's tools, parts, equipment, and requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or because they are frequently out for repair. Recommends possible substitute or interchangeable items. Sets up and maintains storage locations. Determines methods of storage, identification, and stock location, considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued.

2. Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records maintained in the tools and parts room. Compiles reports of use of stock handling equipment, adjustments of inventory counts and stock records, spoilage of or damage to stock, location changes, and refusal of shipments.

3. Ensures that tools and equipment are maintained in good condition by performing visual and operating checks, taking measurements with such devices as calipers, and receiving reports from users on the nature and extent of damage to tools and equipment. May make minor repairs to tools and equipment, determine when damaged and inoperative items are too costly to repair, and report damaged or worn-out equipment to superiors.

4. Determines stock replenishment levels for centrally controlled supplies and other material within funding limitations. Assures that supplies and monies are not wasted through excess accumulation, and that items are on hand in sufficient quantities and at the time required. In addition to established guides and formulas, determines quantities required and timely stock replenishment.

5. Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations, and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available.

6. Searches for identifying or management data on items of supply. Compares data listed on documents with reference sources such as federal catalogs, stock lists, or other publications. Receives requests desiring additional identification data, verification, or comparison of data on hand with reference sources. Searches for stock number, prices, descriptions, sources of supply, or other management data. When unknown, traces part number or type number and manufacturer of the item of equipment.

7. Edits supply transactions, or provides customer service for urgent critical shortage items and other items requiring special handling when established procedures are not applicable. Codes and classifies requisitions, shipping orders, and other documents, and extracts requests to other sources of supply or refers them to an inventory control point when stock is unavailable or cannot be shipped.

8. May assist a Surface Maintenance Mechanic by performing the less complex and more routine helper type duties. May perform maintenance tasks with repairers or mechanics by assisting in the accomplishment of duties. This may involve getting tools and supplies, carrying materials, and lifting and holding materials in place during operations. As directed by the repairer or mechanic, uses hand and powered tools of the trade to assist in the disassembly, assembly, and installation of simple component parts and units. Applies knowledge gained from previous work assignments. Detailed instructions are received from the higher graded Surface Maintenance Mechanic with each new assignment. Work is reviewed by the higher-level employee while in progress and upon completion. Cleans tools, parts, and equipment and keeps work areas clean and orderly.

9. Performs other duties as assigned.

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a trial period.
• Participation in direct deposit is mandatory.
• This position is subject to the Domestic Violence Misdemeanor Amendment (Lautenberg Amendment) of 1968.

Qualifications

MILITARY GRADES:
Enlisted: E1 - E7

COMPATIBLE MILITARY ASSIGNMENTS:
Enlisted: 12 series, 91 series, 92 series

SPECIALIZED EXPERIENCE: Must have at least 6 months of specialized experience or training equivalent to the WG-05 level. Specialized experience in checking incoming stock by matching item names and quantities with receiving documents. Storing, organizing, and issuing tools, parts, and equipment. Maintaining stock records and completing issue/receipt documentation. Conducting inventories and counting items to verify stock accuracy.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

1. Knowledge of a wide range of tools, parts, and equipment sufficient to identify items based on user descriptions, determine appropriate substitutes or interchangeable items, and support maintenance and repair operations.
2. Skill in maintaining accurate inventory records, conducting inventories, and identifying discrepancies such as shortages, overages, or misplaced items using stock records and supporting documentations.
3. Skill in establishing and maintaining storage locations by considering factors such as size, weight, usage, and environmental conditions to ensure efficient organization, accessibility, and safety of tools and parts.
4. Skill in performing visual and operational checks of tools and equipment, determining when items require repair or calibration, and performing minor maintenance to ensure serviceability and readiness.
5. Ability to use supply systems, catalogs, and reference materials to locate stock information, process transactions, and provide timely and accurate support to customers, including resolving shortages and identifying sources of supply.

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing: (MANDATORY)
   • Contact Information-your name and the best way to contact you.
   • Relevant work experience-include the employer's name and job title.
   • Hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment
   • Pay Plan, Occupational Series, and Grade (if applicable)
   • Duties performed.
   • Note: Resume are limited to two (2) pages. Only the first two pages of the submitted resume will be reviewed and considered for qualification and rating purposes.
2. OF 306 Declaration for Federal Employment. (MANDATORY)
3. Current Soldier Record Brief or Soldier Talent Profile dated on or after the issue date of this announcement. (MANDATORY)
4. Letter of Recommendation from first line Military supervisor dated on or after the issue date of this announcement. (MANDATORY)
5. Letter of Recommendation from Commander dated on or after the issue date of this announcement. (MANDATORY)
6. Transcripts, if applicable. College/Vocational school transcripts MUST be submitted in order to receive credit for education.
7. Miscellaneous Items (i.e. Certifications), if applicable.
8. SF-50 (Current or Former Federal Employees), if applicable.
9. DD 214-Member copy, if applicable.

Next steps