Clarification from the agency

Current permanent employees of DoD, DoD Military Spouse Preference (MSP) eligibles, DoD Military Reserve (MR) and National Guard (NG) Technician Preference eligibles and DoD Retained Grade Preference eligibles, and VEOA eligibles.

• You will relay instructions from supervisors to other WG-10 welder employees.
• You will stay abreast of and relay to other welders the current requirements of Controlled Work Packages, Formal Work Procedures, Welding Information Sheets and other work authorization.
• You will ensure work distribution in such a manner to keep his /her crew productive.
• You will serve as a Working Leader who leads employees in performing work which is typical of the Welder trade performing a wide range of shop and shipboard welding.

Conditions of employment

• May be required to work extended hours and night shift work to provide job coverage to meet production schedules.
• Will be required to use protective devices, clothing, and/or equipment such as, but not limited to safety glasses, hard hats, harnesses, life jackets, respirators, safety shoes, etc.
• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal
• This is a bargaining unit position.
• You will be required to successfully complete a pre-appointment physical examination.
• Must be able to maintain IT Level II designation
• This position may require travel worldwide at which time additional medical screening may be required
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or pass the test. You will be subject to random testing.

Qualifications

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.

Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.

This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is:

• Ability to lead, train, and instruct a team of skilled welders, ensuring all shop employees meet production schedules and completion dates safely and efficiently.
• Ability to administer specialized training in non-nuclear structural welding and heating using GTAW, GMAW, and SMAW processes to maintain high workmanship standards.
• Ability to monitor work in progress and conduct inspections to ensure strict adherence to technical specifications, technique sheets, and joint designs.
• Ability to manage shop logistics, including inventorying specialized equipment and collaborating with various departments to develop mock-ups for upcoming projects.
• Ability to perform expert-level welding on diverse metals and alloys, including pressure hulls and vessels, while maintaining mastery of specifications like NAVSEA 248.
• Ability to serve as a primary liaison to supervisors by reporting on job progress, employee performance, and the maintenance of tools and equipment with minimal oversight.

Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification System for Trades and Labor Occupations (X-118C). Additional qualification information can be found at: http://www.opm.gov/qualifications/x-118c/tabindx.asp.

You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following job elements:

• ABILITY TO INTERPRET INSTRUCTIONS AND SPECIFICATIONS, INCLUDING BLUEPRINT READING
• ABILITY TO LEAD OR SUPERVISE
• ABILITY TO PLAN AND ORGANIZE THE WORK
• ABILITY TO WORK WITH OTHERS
• INGENUITY (ABILITY TO SUGGEST AND APPLY NEW METHODS)

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All eligibility and qualification requirements must be met by the closing date of this announcement.

You are required to provide documentation that supports the eligibility and qualification claims made in your resume and assessment questionnaire. You must submit the applicable documents listed here and those listed with the eligibilities you select in the announcement questionnaire with your application package. Applicants who do not provide supporting documentation that fully support their claims will not be referred to the hiring manager. Cover letter is optional.

A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume.

Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package.

Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified.

Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor

Are you a disabled veteran or claiming 10-point veterans' preference?
If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.

You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf.

Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).

Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you mustprovide unredacted originals.

Next steps