Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for an Aircraft Ordnance Systems Mechanic, Position Description Number D1736P01 and is part of the 158th Aircraft Maintenance Squadron of the Vermont Air National Guard.
**This position is also advertised to Active Guard Reserve Airmen under announcement number MVA-AF-24-09**
Clarification from the agency
Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 within the VTNG.
Area II: All Members of the Vermont Air National Guard.
Area III: Currently assigned service members in other branches of the military outside of the VTNG, to include those assigned to Active Duty, Reserve or other state's National Guard.
Area IV: All individuals able to and willing to become members of the Vermont National Guard.
Duties
The primary purpose of the position is to troubleshoot, repair, install, modify, test and adjust aircraft ordnance systems, equipment and components.
(1) Operates, analyzes performance, troubleshoots, inspects, installs, maintains, overhauls, repairs and modifies operational ordnance system(s) and subsystems consisting of numerous complex electronic components in fighter aircraft.
(2) Analyzes performance and isolate malfunctions to individual subsystems and or components of bombing/navigation, fire-control/weapons delivery, weapons multi-sensor displays and external electro-mechanical weapons systems, electro-optical targeting pod/weapon interfaces, R/F electronic countermeasures systems, target radar tracking and missile tracking radar.
(3) Removes, repairs, installs, inspects and conducts operational performance checkout of aircraft ordnance and isolates malfunctions and identifies if failures are in specific LRU's, aircraft weapons, avionics multiplex data bus matrix assemblies, or aircraft digital data wiring.
(4) Loads/unloads, positions and safeties air munitions using applicable technical data and handling equipment.
(5) Conducts off-equipment troubleshooting and functional checks of electronic weapons control systems to ensure proper manual/electrical release and fire sequence.
(6) Ensures all munitions are inventoried at the start and completion of the work shift. Ensures that all munitions expenditures are accurately tracked and recorded on applicable forms. When required will assist the munitions custodian of aircrew training munitions in conducting a weekly munitions inventory and reconciliation.
(7) Coordinates with loading standardization and the weapons element supervisor for all load crew-training requirements and ensures only loading certified/qualified personnel are directed to perform weapons loading tasks and may be required to perform weapons expediting on the flight line.
(8) Maintains and reviews publication files of applicable technical orders, regulations, manuals and local directives. Recommends and rewrites methods to improve maintenance procedures, technical data and equipment and initiates unsatisfactory equipment and technical order deficiency reports.
(9) Provides hands-on training instruction to lower graded personnel concerned with the repair of the electronic ordnance systems within the aircraft. May be required to perform additional duties as a production controller, quality assurance inspector, and bench stock monitor for the work center.
(10) Processes and accounts for due in from maintenance (DIFM) supply assets and ensure materials and equipment are properly stored, protected and maintained and funds are not obligated for material or parts without proper justification.
(11) Adjusts, installs and removes cartridges and squibs for tanks and pylons and chaff/flare systems.
(12) Operates fault detection and digital test equipment. Evaluates pilot trouble reports to determine validity and the necessary repair actions. May be required to maintain certification as a weapons load crew chief or load crewmember.
(13) May be required to perform additional duties such as launch/recovery aircraft servicing, fire fighting, crash rescue duty or serve as a member of a team to cope with natural disasters or civil emergencies.
(14) May be required to inspect, troubleshoot, test and maintain the Aerial Gunnery Target System.
(15) May be delegated authority to clear Red X on aircraft forms.
(16) Performs other duties as assigned.
**REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES**
Conditions of Employment
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- May occasionally be directed to work other than normal duty hours.
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- May require travel in military and/or commercial aircraft to perform temporary duty assignments.
Qualifications
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 excepted service position that requires membership in a compatible military assignment in the Vermont Air National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the Vermont Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a Vermont Air National Guard recruiter at (802) 660-8058 prior to applying for this position.
OPEN AREAS OF CONSIDERATION: AREA 1, 2,3, 4
Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 (Competitive and Excepted) Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite) - Only those Vermont National Guard members who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area II: All Members of the Vermont Air National Guard.
Area III: Currently assigned service members in other branches of the military outside of the VTNG, to include those assigned to Active Duty, Reserve or other state's National Guard.
Area IV: All individuals able to and willing to become members of the Vermont National Guard including prior service not currently assigned to a military component and non-prior service US civilians.
Military Grades: Military grade will be individually addressed up to MSgt/E7.
GENERAL EXPERIENCE: -Experience or training which demonstrates the applicant's ability to repair malfunctions of ordnance equipment and components. Ability to use sketches, electrical diagrams, technical specifications, and engineering drawings. Experience which demonstrates skill in the use of test equipment to make electrical, hydraulic, and pneumatic checks.
SPECIALIZED EXPERIENCE WG-11: Must have a minimum of 36 months experience or training in planning and layout of repair sequence and ability to complete modification, repair, and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedies where complex relationships exist. Experience in hand tools and the use of a variety of measuring and test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams, and manufacturer's specifications.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
-Knowledge and appropriate training in functions of inspection, maintenance, installation, modification and repair of air munitions launch, release, suspension systems, R/F electronic countermeasures system and aircraft gun systems.
- Comprehensive knowledge and skill in troubleshooting procedures, diagnosing problems and determining corrective action in the aircraft ordnance electronic systems.
- Knowledge and skill to troubleshoot, repair, modify, or remove equipment and components such as gun systems, bomb racks, pylons, and the Ammunition Loading Systems (UALS/ALS).
- Knowledge and ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas to solve work related problems.
- Operational knowledge and skill in the operation, interrelationship and interdependent aspects of each ordnance system within the total complex aircraft electronic system(s) within fighter aircraft. Has extensive knowledge of each system's prerequisites, sequential events, and logic flow and signal input/output requirements for successful target acquisition, lock-on, launch and delivery of air-to-air and air-to-ground weapons.
- Knowledge of the principals of digital and analog circuits, synchro-electro-mechanical devices, solid-state devices theory, digital techniques /servo operation and circuit theory.
- Comprehensive knowledge and skill to exercise judgment and to apply electronic theories and practices to identify, isolate, and repair malfunctions in individual subsystems of complex electronic systems.
- Knowledge of mechanical, hydraulic, pneumatic and optical principals.
- Skill in operating assigned computer systems to document job data and to operate and run test equipment.
- Skilled in high reliability soldering techniques and electrostatic discharge protective techniques is required.
- Knowledge of the Technical Order Distribution System and other technical publications and directives relating to work requirements.
OTHER REQUIREMENTS:
-This position is subject to the Lautenberg amendment to the gun control act of 1968 which makes it a felony for anyone who has been convicted of a misdemeanor crime of domestic violence to ship, transport, possess, or receive firearms or ammunition. Civilian personnel of the Department of the Defense are not exempt from this provision.
Please be advised:
1. Specialized experience will be used to determine qualifications for the announced position.
2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed.
3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts.
Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement.
Education
There are no specific educational requirements for this position.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Please be advised that the applicant rating will be evaluated on the following occupational competencies:
1. Attention to Detail
2. Ammunition and Explosives
3. Organizational Awareness
4. Technical Competence
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: resume must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.
2. AGO-VT Form 690-5, Military Experience and Education Resume (All applicants, currently serving in the military, prior-service and civilians MUST complete the name block and military affiliation block of the AGO-VT Form 690-5 and sign and date the form).
Other supporting documents (as applicable):
- For current Federal employees: Latest SF 50, Personnel Action
- DD -214
- Transcripts
- Certifications
Helpful Hints for Applying:
- Ensure that your resume contains your full name, address and phone.
- Include details about the experience that relates to the position you are applying for.
- Be specific and always include Month and Year for the dates of your experience.
- Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held.
In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.
If you are using education to qualify for this position or education is a mandatory requirement to meet qualifications, you must submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.
In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.
If you are using education to qualify for this position or education is a mandatory requirement to meet qualifications, You must submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
|