Summary
About the Position: This job announcement is for a Civil Engineer, GS-0810-07/09/11/12 position at the U.S. Army Corps of Engineers, Rock Island District. Selection may be made at any grade level. This position has non-competitive promotion potential to the target grade, GS-12.
This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.
Duties
- This duties listed below are at the full performance, GS-12:
- Perform overall planning and coordination (design memorandum through final design) of assigned civil works projects for which the Section is responsible.
- Work with supporting CAD technicians and interdisciplinary engineers and scientists, assemble plan drawings and plan specifications.
- Design ecosystem restoration projects, levee repairs, and perform hazardous waste analysis.
- Coordinate work with supporting counterparts to assure maximum efficiency in processing work, adherence to design schedules, proper coordination between units, and dissemination of additional instructions or changes in design criteria.
- Prepare reconnaissance studies, feasibility reports, design memoranda, final plans and specifications, and operation and maintenance manuals.
- Responsible for the technical review and accuracy of completed drafts of reconnaissance studies, feasibility reports, design memoranda, final plans and specifications, and operation and maintenance manuals prepared.
- Responsible for overall leadership and coordination of projects with all supporting CAD technicians and interdisciplinary engineers and scientists.
- Responsible for overall operating program coordination, participates by coordinating with supervisor and Programs and Project Management Division.
Requirements
Conditions of Employment
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Must possess a valid State driver's license for the class of vehicle being operated based on site specific, job related requirements, and must maintain this license.
Qualifications
Who May Apply: US Citizens
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
** Basic Requirement for Civil Engineer Series is listed in the "Education" Section of this job announcement.**
For additional information: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
In addition to meeting the basic education requirement, to qualify for this position applicants must ALSO meet the qualifications requirements listed below:
Minimum Qualifications for GS-07:
Specialized Experience: One year of specialized experience which includes learning and assisting with the review of engineering design plans and/or specifications for accuracy; learning to prepare design features for civil works projects, such as contract plans, specifications, as-built drawings, feasibility studies, design documentation reports, and operation and maintenance manuals; and collaborating with personnel from various organizations to complete assigned projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering.
OR
Superior Academic Achievement: In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
Minimum Qualifications for GS-09:
Specialized Experience: One year of specialized experience which includes learning and assisting with the review of engineering design plans and/or specifications for accuracy; assisting with preparing design features for civil works projects, such as contract plans, specifications, as-built drawings, feasibility studies, design documentation reports, and operation and maintenance manuals; and collaborating with personnel from various organizations to complete assigned projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates that knowledge , skills, and abilities necessary to do the work of the position, such as : Engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.
Minimum Qualifications for GS-11:
Specialized Experience: One year of specialized experience which includes assisting with the review of engineering design plans and/or specifications for accuracy; preparing design features for civil works projects, such as contract plans, specifications, as-built drawings, feasibility studies, design documentation reports, and operation and maintenance manuals; and collaborating with personnel from various organizations to complete assigned projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Minimum Qualifications for GS-12:
Specialized Experience: One year of specialized experience which includes assembling plan drawings, plan specifications, as-built drawings, feasibility studies, design documentation reports, and operation and maintenance manuals, working with ecosystem restoration, levee repair, and hazardous waste analysis. Provide leadership in analyzing specifications for accuracy; preparing design features for civil works projects, such as contract plans, specifications, and as-built drawings; providing technical guidance on design memoranda and final plans prepared; and serving as project manager or technical lead on engineering projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-11).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
Education
Basic Education Requirement for Civil Engineer Series:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications.
NOTE: You must provide a copy of your transcript.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):
- Arithmetic/Mathematical Reasoning
- Attention to Detail
- Customer Service
- Flexibility
- Integrity/Honesty
- Interpersonal Skills
- Learning
- Reading Comprehension
- Self-Management
- Stress Tolerance
- Teamwork
Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.
You may claim Military Spouse preference.
Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.
You may claim Priority Placement Program (PPP) preference.
DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.
Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.
Required Documents
The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements.
As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
1. Your resume:
- Your resume may be submitted in any format and must support the specialized experience described in this announcement.
- If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
- For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position.
- For additional information see: What to include in your resume.
2. Other supporting documents:
- Cover Letter, optional
- Most recent Performance Appraisal, if applicable
- This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses
NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Please read the entire announcement and all the instructions before you begin an application. To apply and be considered for this position, you must complete all required questionnaires, assessments and submit all required documentation as specified in the How to Apply and Required Documents section.
The complete application package must be submitted by 11:59 PM (ET) on the closing date of the announcement to receive consideration. The application process is as follows:
- Click the Apply Online button.
- Answer the questions presented in the application and attach all necessary supporting documentation. To preview the application questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12388732
- Click the Submit Application button prior to 11:59 PM (ET) on 05/22/2024.
- If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice.
- Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials.
- Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended.
- Set aside at least 3 hours to take the USA Hire Assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link.
- Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused.
For more general information, system requirements, reasonable accommodation information, and to request assistance regarding the USA Hire Assessments, review the following resources: https://help.usastaffing.gov/Apply/index.php?title=USA_Hire_Assessments
To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed.
To view the announcement status or your application status: Click on this: https://www.usajobs.gov/Help/how-to/application/status/. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application.
Next steps
If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
Based on your application and your responses to the application questionnaire, you may be presented with instructions on how to access the USA Hire system to complete the online assessments. The online assessments must be completed within 48 hours following the close of this announcement. You will have the opportunity to request a testing accommodation for the assessment should you have a disability covered under the Rehabilitation Act of 1973, as amended.
|