Summary
THIS IS A NATIONAL GUARD TITLE 5 EXCEPTED SERVICE POSITION.
This National Guard position is for a ENVIRONMENTAL ENGINEER, Position Description Number T5210000 and is part of the ME 101st Civil Engineering Squadron, National Guard.
Clarification from the agency
AREA OF CONSIDERATION:
Area I: All Current On-Board Permanent and Term Title 32 and Title 5 (Competitive & Excepted) Employees
Area II: Currently serving members of the Maine Air and Army National Guard. (Veterans' Preference will Apply)
Area III: Former members of the Maine Air and Army National Guard. (Veterans' Preference will Apply)
Area IV: All US Citizens. (Veterans' Preference will Apply)
Duties
This position is located in the Base Environmental Management Office and serves as the installation Environmental Program Manager for the assigned Air National Guard (ANG) installation. An ANG installation can be one with a flying mission or non-flying mission such as a Civil Engineering Red Horse Unit, a Combat Readiness Training Center, or a Geographically Separated Unit with regional geographical responsibilities. Serves as the single point of contact for the initiation, development, and execution of all environmental activities and development of regulatory guidance for an installation and its immediate geographic region, with a collaborative influence extending to a broader area. Regional responsibilities may include, but are not limited to: aircraft mishap response, off site release assessments, air emission estimates, storm water discharge monitoring, and hazardous material shipments. Broader geographic impacts may include, but are not limited to: exporting project solutions, staff assistance visits, compliance assessments, and partnering with other units and intra-agency contacts to address challenges that affect multiple ANG units within or beyond state boundaries. Accomplishes long range environmental planning, budgeting, and programming activities that impacts the installation and the region. Reviews engineering planning and construction documents for environmental considerations as required. Oversees the operations of the Environmental Management Office to include providing limited supervision over any subordinate positions. Supervisory responsibilities will constitute less than 25% of the average work time, thus are not classification impacting.
MAJOR DUTIES:
1. Manages a most complex, highly technical environmental management and protection program and serves as the installation's single most knowledgeable expert on DoD, AF, ANG, EPA state specific environmental laws and regulations. Environmental Management duties and responsibilities include, but are not limited to: (1) Hazardous Waste Management; (2) Storm Water Management and Control; (3) Air Quality; (4) Water Quality; (5) Pollution Prevention; (6) Green Procurement; (7) Environmental Restoration Program (ERP); (8) Cultural and Natural Resources Management; (9) Spill Prevention and Response; (10) Environmental Management System; (11) Environmental Impact Analysis Program (EIAP) Management; and (12) Qualified Recycling Program Management. (30%)
2. Manages the entire Planning, Programming, Budget and Execution (PPB&E) for the installations environmental quality (EQ) program area. Additional budgetary responsibilities may include working with the Defense Logistics Agency (DLA) Energy and Environment for recurring environmental costs related to DLA owned fuel systems. Provides financial analysis and planning for Environmental resource requirements, to include planning, programming and execution. Responsible for planning, budgeting, and reporting environmental financial information through directed financial databases. (20%)
3. Prepares and guides implementation of environmental program plans. Environmental program plans can include, but are not limited to (1) Spill Prevention Control and Countermeasures (SPCC) Plan; (2) Storm Water Pollution Prevention Plan (SWPPP); (3) Hazardous Waste Management Plan (HWMP); (4) Air Emissions Inventory (AEI); (5) Green Procurement Plan (GPP); (6) Integrated Pest Management Plan; (7) Refrigerant Management Plan; (8) Cultural or Natural Resources Management Plans; (9) Environmental Management System (EMS) Plans; and (10) Integrated Solid Waste Management Plan. (20%)
4. Serves as an active member of the installation Design Working Group (DWG) accomplishing short term and long range planning in conjunction with Civil Engineering for future military construction and renovation projects. Responsible for ensuring all necessary environmental permits for related construction projects are obtained and necessary plans developed and implemented. (10%)
5. In accordance with the Environmental Impact Analysis Process (EIAP)statutory requirements, the incumbent is responsible for evaluating the environmental impact of construction and renovation projects. Facilitates the decision making process ensuring due consideration is given to the natural environment, social, political, economic, and governance factors and provides a holistic frame work designed for the achievement of sustainable outcomes. (10%)
Conditions of Employment
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- Must be able to obtain and maintain a Secret Security Clearance
Qualifications
**This is an Indefinite Tenure position. This position may be terminated at any time with a 30-Day Notice. This position may convert to Permanent without future competition.
SPECIALIZED EXPERIENCE: Must have 1-year equivalent to at least next lower grade level experience, education, or training for management, supervision, or performance of (1) planning, designing, construction, and/or maintaining structures and facilities; and (2) investigating, measuring, surveying, and mapping the earth's physical features.
Education
Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
If determining basic qualification requirements on a Combination of education and experience, use the Office of Personnel Management Individual Occupational Requirements Paragraph B and add the following 2 subparagraphs under Paragraph B 2 for this Series.
B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A."
B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."
Functional Manager Selective Factor - Professional Registration:
Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Engineer intern and engineer in training does not meet the selective factor professional registration requirement.
If you are using Education to qualify for this position,
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
1. Knowledge and abilities applicable to a wide range of environmental engineering duties;
2. Skill to modify standard practices and adapt equipment or techniques to solve a variety of problems.
3. Ability to plan, develop, coordinate, and monitor environmental facilities or projects so as to assure compliance with applicable objectives, standards, and requirements.
4. Skill in planning, organizing, coordinating, operating, and evaluating Installation Environmental programs.
5. Skill in oral and written communications to prepare and present briefings/project papers, and staff reports.
6. Knowledge of Environmental Protection Programs that involve federal/state compliance procedures and standards associated with pollution prevention, hazardous waste management/minimization, recycling and environmental impact.
7. Skill to modify standard practices and adapt equipment or techniques to solve a variety of problems.
8. Knowledge of contract administration to negotiate and provide technical oversight, monitor vendor performance, and ensure compliance with terms of contract.
9. Skill in planning, organizing, coordinating, operating, and evaluating Installation Environmental programs.
10. Skill in oral and written communications to prepare and present briefings/project papers, and staff reports.
11. Knowledge of and skill in applying basic budgetary policies and procedures to provide a financial analysis of environmental resource requirements.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: Transcripts, Veterans Preference Documents, Certifications.
It is highly suggested that applicants address the General and Specialized Experience required of the position within their resume or on a separate document. All information provided during the application process will be verified. Failure to address all General and Specialized Experience requirements may result in non-selection for an interview.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12392501
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
|