Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a PAINTER (Title 32), Position Description Number D2127000 and is part of the AR ARNG CSMS, National Guard.
NATIONAL GUARD MEMBERSHIP IS REQURED
Clarification from the agency
(1) Arkansas Army National Guard (AR ARNG) Technicians; (2) All members of the AR ARNG, (3) Individuals who are not members of the National Guard but who are eligible to acquire membership in an available and compatible military grade for excepted technician positions. (Upon selection, must be a member of the AR Army National Guard).
Duties
(1) Prepares surfaces (i.e., metal, wood and glass) by removing rust, paint, and loose particles. Fills in holes and dents using body fillers and hardeners. Sands and evens out dents and scars to assure a smooth and level surface using sanders, scrapers, sandpaper, hand tools, wire brushes, and paint remover. Applies coatings to specified areas ensuring the surfaces are free from skips, runs, and drips. Applies rustproof compound to areas such as splash panels, quarter panels, seams structural members, and underbody construction. Applies coatings using brushes, rollers, and spray paint equipment.
(2) Prepares coating materials using guidelines set by the manufacturer, by tinting, toning, etching, blending, and mixing in various additives (i.e., retardants, hardeners, drying agents, and other additives) needed for the different coatings to work properly and achieve the necessary surface appearance. Uses measuring equipment (i.e., Zhan cup) to achieve the proper viscosity and thickness for applying the coatings. Applies prime, intermediate and final coats of semi-gloss, gloss and other paint, lacquer, enamel, varnish and shellac. Ensures that match, texture and appearance meet finish requirements. Replaces and applies markings/lettering as specified by appropriate manuals.
(3) Applies coatings using acceptable methods of the trade to include special finishing techniques to achieve desired results. Reads and interprets blueprints when applying camouflage patterns. Replaces markings and letterings as specified by the appropriate manuals. Reads and interprets directions that relate to mixture, use, and application of various kinds of coating materials, solvents, and precoating agents.
(4) Monitors and adjusts air pressures in paint booth, controls heat settings and drying times in drying booth to achieve proper surface adhesion of coatings. Completes records for paint usage and paint waste as per environmental regulations.
(5) Applies Chemical Agent Reactive Coating (CARC) materials in accordance with specifications and dimensions. Manages workflow into the paint shop as assigned by the supervisor. Determines what jobs can be done in a series or if items need to be completed alone. Confers with the customer when needed to best achieve the desired results. Cleans and maintains painting equipment.
(6) Performs other duties as assigned.
Conditions of Employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.
Military Grades: Enlisted
Minimum Grade - PVT (E-1)
Maximum Grade - SFC (E-7)
Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard and be assigned to a compatible military position in CSMS in Enlisted Career Management Field Career Management Field (CMF) 12, 91, 92. Must become compatible within 12 months of appointment.
IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.
Males born after 31 December 1959 must be registered for Selective Service.
Federal employment suitability as determined by a background investigation.
May be required to successfully complete a probationary period.
Participation in direct deposit is mandatory.
Qualifications
GENERAL EXPERIENCE:
Experience or training which demonstrates the candidate's knowledge of surface preparation (removal of rust, dirt, paint, etc); coating methods (brushing, rolling, and spraying); and coating materials (paints, varnishes, shellacs, etc). Must have the ability to use tools and equipment associated with the painting trade and to read and interpret directions.
SPECIALIZED EXPERIENCE:
Experience or training which demonstrates the candidate's knowledge of standard surface preparation and coating methods and techniques. Experience must demonstrate the skill to sand, wire brush, scrape, spackle, putty, prep surfaces and select appropriate tools to complete assigned tasks. Experience must also demonstrate the skill to brush on, roll on, and spray coating materials, and apply other related methods and techniques, such as cutting-in techniques and dip and overflow methods. Experience which required the applicant to interpret and follow technical orders, specifications and publications.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, general and specialized experience):
--Knowledge of any accepted surface preparation and coating methods and techniques to apply coatings to stationary and mobile equipment, and to combat, tactical, and commercial vehicles. Skill in preparing the surface for paint by using compounds and abrasive to even out dents and scars. Skill to remove rust, paint, and loose particles from surfaces so that coating materials will adhere properly.
--Ability to prepare coating materials by tinting, toning, etching, blending, and mixing in various additives (i.e., retardants, hardeners, drying agents, and other additives). Knowledge of tools when mixing and testing paint for viscosity and thickness.
--Knowledge of coating materials so that surfaces are free from skips, runs, and drips, orange peels, fish eyes, and brush strokes. Skill to sand, wire brush, scrape, spackle, and putty surfaces; to brush on, roll on, and spray coating materials; and to apply other related methods and techniques.
--Ability to read and apply directions that relate to the mixture, use, and application of various kinds of coating materials, solvents, etc. Ability to read paint schemes, and manufacturers specific instructions and guidelines.
--Skill in using tools and equipment such as scrapers, wire brushes, putty knives, sandpaper, paintbrushes, rollers, and spray guns.
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
DO NOT COPY THE SPECIALIZED EXPERIENCE QUALIFICATIONS WORD FOR WORD AND PLACE INTO YOUR RESUME; YOU MUST DESCRIBE YOUR PERSONAL EXPERIENCE AS IT PERTAINS TO EACH STATEMENT.
2. Individual Medical Readiness (IMR) dated within 18 months: Can be obtained from Army Knowledge Online (AKO)/Self Service/My Medical Readiness. Click on any "View Detailed Information" selection, then select your IMR Record. Please ensure that you are uploading a PDF DOCUMENT, not a screen shot. PHA MUST BE DATED WITHIN 18 MONTHS AS OF THE CLOSING DATE OF THIS ANNOUNCEMENT!!!
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
|