Summary
This position provides technical assistance and laboratory services for the inspection program within the Mine Safety and Health Administration, Enforcement, Norton District. The primary focus is the calibration and repair of sampling instruments used by inspection personnel and ensuring instruments and supplies are readily available to the inspection force.
This position is inside the bargaining unit.
This job is open to
Clarification from the agency
Open to U.S. citizens and CTAP/ICTAP eligible(s) within the local commuting area. Also advertised as job #MS-24-DAL-12397140-KAS for status applicants; reinstatement eligible(s); VEOA eligible(s); Military Spouses; Land & Base Management eligible(s); OPM Interchange Agreement eligible(s); and CTAP/ICTAP eligible(s) within the local commuting area. To be considered for each vacancy apply to BOTH jobs.
Duties
- Calibrates a wide variety of instruments used in the inspection program including those which measure mine gases, noise, respirable dust and other physical agents.
- Inspects instruments which are not functioning properly or will not calibrate properly to determine the source of the problem and make needed repairs.
- Maintains an adequate supply of repair parts and expendable supplies for the various sampling instruments, ensuring sufficient stock is on hand to support the inspection program.
- Maintains cap lamps and chargers for the duty station by inspecting, testing and replacing defective parts, ensuring batteries are charged to full capacity.
- Advises and assists mine operators in setting up a respirable dust pump calibration facility so that mine operators can check the flow of rate and calibration of their sampling equipment.
- Consulting with suppliers on parts or equipment that may be defective and coordinate the exchange of products with vendors.
- Provides training to Field Offices regarding dust sampling equipment, record keeping and reporting requirements, as well as the use, care and maintenance of self-contained self-rescue devices.
- Provides direct assistance to field offices in the preparation of responses to DOL, Agency and other investigative sources by making recommendations for corrective action and coordinating as required.
- Maintains complete history for each instrument, including calibration records, repair history and service life.
- Conducts annual respirator fit testing and compiles and maintains records pertaining to such testing.
- Uses word processing equipment and software to create, store and retrieve work documents including correspondence and reports in a variety of formats.
- Enters, retrieves, compiles and prints inspection-related data for MSIS system.
- Maintains files and records including automated databases or spreadsheets, regarding MSHA conducted sampling and operator conducted sampling.
- Reviews dust data cards for accuracy and packages and mails dust samples to the laboratory for analysis.
- May be called upon to testify in court hearings as to the accurate calibration or repair of sampling instruments.
- Conducts field inspections to ensure proper laboratory techniques are being followed.
- Conducts testing of mining personnel to qualify them as certified dust samplers.
- Audits activities including records, service files, deficiency reports in order to ensure that appropriate action has been taken.
- Studies program operations and reports in order to determine program trends, detect weaknesses and identify deficiencies in regulatory requirements compliance including equipment integrity and effectiveness in meeting appropriate requirements.
Requirements
Conditions of Employment
- Must be a U.S. Citizen.
- Must be at least 16 years old.
- Requires a probationary period if the requirement has not been met.
- Candidate required to obtain the necessary security/investigation level.
Qualifications
To qualify for this position, your application and resume must clearly show that you possess the experience and/or education requirements as defined below. If qualifying based on experience, be sure these types of examples are evident in your resume.
The Physical Science Technician Series , GS-1311, has basic occupational requirements for positions covered by this standard.
Applicants must meet the following basic requirements (IOR) to qualify:
Applicants must have 52 weeks of specialized experience equivalent to a least the next lower grade level, GS-06 in the Federal Service. Examples of qualifying specialized experience include work in the fields of astronomy, physics, geophysics, chemistry, hydrology, health physics, engineering, electronics, geology, oceanography, and metallurgy. Experience as a laboratory mechanic or in a trade or craft may be credited as general or specialized experience when the work was performed in close association with physical scientists or other technical personnel and provided intensive knowledge of appropriate scientific principles, methods, techniques, and precedents.
In addition to the Basic Occupational Requirement listed above, applicants must meet ONE of the following to qualify for the GS-07:
Specialized experience: One full year of specialized experience equivalent to at least the next lower level, GS-06 of Federal service in at least two of the following: 1) Tests and calibrates mine hazard detection instruments; 2) Reads schematics and comprehends relevant technical literature; 3) Follows respirator fit testing procedures; 4) Operates, maintains, and uses self-contained self-rescuers; 5) Follows procedures and requirements for certification of dust samplers; and/or 6) Analyzes and evaluates data/information.
OR
Education: One full year of graduate level education that is directly related to physical sciences;
OR
An equivalent combination of specialized experience and education as described above.
Education
Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.
If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum coursework requirements for this position. Click Evaluation of Foreign Education for more information.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
If you meet the minimum qualifications, you will be evaluated against the evaluation factors below and will be placed into a category based on your vacancy question responses.
Category A - Meets the basic qualification requirements for the vacancy and has successful experience in the same or similar job that has demonstrated superior proficiency in applying critical competencies required by this position to work of increased levels of difficulty and complexity.
Category B - Meets the basic qualification requirements for the vacancy and demonstrates satisfactory proficiency in the critical competencies required by this position.
Category C - Meets the specialized experience described in the minimum qualification requirements section of this announcement and demonstrates proficiency in the basic competencies.
Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies:
- Applies Technology to Tasks
- Customer Service (Clerical/Technical)
- Manages and Organizes Information
- Organizational Awareness
- Reasoning
Click here for Evaluation details.
You may preview questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/12397139
The information you provide may be verified by a review of your paid, unpaid, volunteer, and other lived experience, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.). The examining Office of Human Resources (OHR) makes the final determination concerning applicant ratings. Your resume MUST provide sufficient information to substantiate your vacancy question responses. If not, the OHR may amend your responses to more accurately reflect the level of competency indicated by the content of your resume.
INFORMATION FOR ICTAP/CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration. ICTAP/CTAP eligible(s) who are placed into Category B or higher will be considered well-qualified. Be sure to review the eligibility questions to reflect that you are applying as an ICTAP or CTAP eligible and submit supporting documentation.
Click Application of Veterans Preference for Category Rating Jobs for more information.
Required Documents
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date.
- Resumes: Required and applicants must provide a resume either by creating one in USAJOBS or uploading one from your profile. To receive full consideration for relevant and specialized experience, please list the month, year, and number of work hours worked for the experience listed on your resume. We also suggest that you preview the vacancy questions and confirm that your resume supports your question responses.
- Veterans Documents (if applicable): To be considered as a 5-point (TP) preference eligible, you must submit a copy of your DD214, Certificate of Release or Discharge from Active Duty. Your DD 214 must show the type of discharge and dates of active duty. To claim 10-point (CP/CPS, XP) preference, you must submit a copy of your DD214; an Application for 10-point Veteran's Preference, SF15; and the proof of entitlement of this preference, which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. (For active-duty service members expecting honorable or general discharge or release within 120 days, click Active Duty). Without this documentation, you will not receive the veteran's preference. For more information, go to Feds Hire Vets - Veterans Preference
- Displaced Employee Placement Documents: Only required if requesting priority consideration under CTAP or ICTAP eligibility.
- Unofficial Transcript(s) (in English) - If you are using education as a basis for qualifying for this position, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, PhD, etc.). If specific coursework is required to qualify, you must supply an unofficial transcript from each academic institution in which the required courses were taken in order to receive credit. You may upload your unofficial transcript(s) as one document with a maximum size limit of 5 MB.
NOTE: The OFFICIAL Transcript(s) MUST BE RECEIVED if you are selected, and prior to receiving the firm offer with a start date.
Cover Letters are not mandatory and will not be used to verify experience but may be submitted.
Do not upload password-protected documents.
Applicants selected for employment who are not current DOL employees will be required to provide proof of citizenship, and the E-Verify system will be used to confirm the employment eligibility of all new hires.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Persons who are deaf, hard of hearing, blind, or have speech disabilities, please dial 711 to access telecommunications relay services.
To apply for this position, you must complete the initial online application, including submission of the required documentation specified in the Required Documents section.
Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time on the vacancy closing date to receive consideration.
Paper applications and supplemental documents submitted in any other manner without prior approval from the vacancy contact will not be considered. Click here for information on Reasonable Accommodations.
Important - Save your information before the 30 minute system timeout! For help, go to USAJOBS Help Center.
STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents. Your resume must provide sufficient information to substantiate your responses to the self-assessment vacancy questions. If not, HR may amend your responses to more accurately reflect the competency indicated by resume content. For each employment period, include start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week) otherwise, your application may be considered incomplete.
STEP 2 - Complete the 1st part of the application process (USAJOBS) Once you have identified a job on USAJOBS that you wish to apply for, click on the job title and then click the Apply button. For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Proceed through the steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. In the final step, once you have certified your application, click the Continue to agency site button.
STEP 3 - Complete the 2nd part of the application process (DOL). On the Department of Labor (DOL) page, create a DOL Account if you have not already and click Apply to this vacancy. Continue through the progress steps at the top of the DOL page. The 2nd progress step is where you answer the vacancy-specific questions. The 3rd progress step Documents is where you submit the required documents (only if applicable to you) specified in the Required Documents section of this vacancy.
STEP 4 - On the Review and Submit step, verify each section of your application is complete and correct. In order to submit your application, you must have a check mark next to each section listed. If there is an X, return to the appropriate section and follow the prompts. When it is ready for submission, certify your application and click the Submit Application button.
STEP 5 - Edit Application as needed by 11:59 pm Eastern Time of Closing Date by returning to USAJOBS, clicking the vacancy, thenUpdate Application.
NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date.
For more detailed information on applying for positions with DOL click here to view the U.S. Department of Labor, How to Apply website.
Next steps
Once your complete application is received, we will conduct an evaluation of your qualifications and refer candidates for selection consideration. Candidates will be referred to the hiring manager for further consideration and possible interviews. You will be notified of the outcome. A selection is expected to be made within 30 calendar days of the issuance date of the certificate.
For instructions on how to check the status of your application, go to USAJOBS Help Guide.
USAJOBS will no longer send status alert email notifications. You can check your application status in the TAS by logging into USAJOBS and in the Applicant Dashboard, click the hiring agency Talent Acquisition System (TAS). If the TAS does not provide application tracking information, contact the agency's point of contact on the job announcement.
To verify your application is complete, log into your USAJOBS account, https://my.usajobs.gov/Account/Login, select the Application Status link, and then select the more information link for this position. The Application page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Your uploaded documents may take several hours to clear the virus scan process. To return to an incomplete application, log into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
|