Summary
This SHEET METAL MECHANIC (AIRCRAFT) position, is located within a National Guard aircraft maintenance organizationand is part of the CA 144 FW.
This is an open until filled announcement. The announcement will be posted until all positions have been filled. Applications will be reviewed every 30 days and you will receive an email regarding your application status when reviewed.
Clarification from the agency
Current members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty.
Duties
THIS IS A T32 EXCEPTED SERVICE, PERMANENT POSITION.
The primary purpose of the SHEET METAL MECHANIC (AIRCRAFT), WG-3806-8/10, is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and non powered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing.
May make additional selections within 90 days of eligible(s) issuance.
Conditions of Employment
CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://state.nationalguard.com/california
Compatible Military Assignment and Grade are required. Military technicians must be assigned to a military position in the same unit which they are employed or, in a unit that is supported by the employing activity. Military technicians must hold the military grade specified for the position.
Areas(s) of Consideration:
Consideration is first given to the areas below.
AREA I= Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment.
AREA II= Current California National Guard members.
AREA III= Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment).
Military Grades: E-1 through E-6
Recruitment/Relocation
Recruitment/Relocation Incentive IS NOT authorized.
PCS
Relocation Costs IS NOT authorized based on determination that Permanent Change of Station (PCS) move is not in the Government best interest.
Must maintain appropriate level of security clearance.
Must wear appropriate military uniform including required grooming standards.
Must maintain a compatible military unit, grade and job assignment as required by current directives.
Participation in direct deposit is mandatory.
Qualifications
General Experience: Possess experience or training that has provided the ability to remove, repair, modify, and install parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items.
SHEET METAL MECHANIC (AIRCRAFT), WG-3806-08 (Trainee): Must have 12 months experience or training planning, manufacturing, and installing cylindrical, square, or rectangular-shaped objects that have easily constructed fastening. Experience cutting and forming by using basic hand and powered tools such as hammers, chisels, hand snips, band and circle saws, squaring shears, seamers, bar folders, breaks, and stakes. Experience assembling parts by seaming, bolting, screwing, riveting, tacking, spot-welding, or soldering. Experience demonstrating a basic understanding of using measuring instruments.
SHEET METAL MECHANIC (AIRCRAFT),WG-3806-10: Must have at least 18 months experience in layout, bending, cutting, forming and assembling to manufacture items of aircraft and equipment; Experience using more complicated shop tools and equipment; Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys; Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments?
TRAINEE POSITION: Applicants not meeting full qualifications for the WG-10 position indicated above may be considered for WG-08 trainee, if qualified. Statement-of-Difference of qualification requirements for each are indicated. If appointed as trainee, the selectee may be non-competitively promoted to WG-10 upon meeting full qualifications and recommendations of supervisor.
Your qualifications will be evaluated on the following competencies:
- Ability To Use and Maintain Tools and Equipment
- Attention to Detail
- Metal Processing and Metalworking
- Trouble Shooting
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (month/year to month/year or present) of employment and duties performed.
2. Other supporting documents: applicable documents required for qualification, education, or certification as stated above.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section above.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. No changes to the application may be made after the close date of the announcement.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
If you do not receive an email that your application has been received, make sure the application was correctly submitted.
False Statements - If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or you may be subject to fine, imprisonment, or other disciplinary action.
|