Summary
This position is a Civil Engineer, GS-0810-9/11, working in either Portland, Oregon; Vancouver, Washington; or Sacramento, California Regional Office, for the Region 1 Infrastructure Management Division.
This job is open to
Clarification from the agency
This position will be filled under the Office of Personnel Management's Direct Hire Authority and is open to all United States citizens and U.S. nationals. Veteran's preference and traditional rating and ranking of applications do not apply. All qualified applicants will be referred to the hiring manager for consideration for this position.
Duties
As a Civil Engineer, your duties will include, but are not limited to, the following:
- Complete construction project location visits to gather data for the development of the scope of work, designs, plans and specifications.
- Conduct investigations of project sites to determine feasibility of proposed projects and adequacy of funding.
- Provide technical assistance to staff in developing statements of work for negotiated contracts
- Monitor construction progress and confirm that construction is progressing in accordance with contract requirements.
Requirements
Conditions of Employment
- Must be a U.S. Citizen or National.
- Resume (See "Required Documents"). Failure to provide ALL required information on your resume will result in loss of consideration due to an incomplete application package. It is your responsibility to ensure all information is provided on resume.
- Eligibility and Supporting documents - You will ONLY be considered for the eligibilities that you select "yes" to AND submit the required supporting documentation, as listed in the Required Documents section.
- Suitability for employment, as determined by background investigation.
- Driver's License: Selectee required to possess and maintain a valid State driver's license at all times during their tenure.
- Probationary Period: Selectee may be required to successfully complete a probationary period.
- Individuals assigned male at birth after 12-31-59 must be registered for the Selective Service. To verify registration visit SSS.gov.
Qualifications
Only experience and education obtained by 06/28/2024 will be considered.
In order to qualify for this position you must possess both the Basic Education Requirement and Minimum Qualification.
Basic Education Requirement
Possess a bachelor's or higher degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics, OR
Posses a combination of education and experience - college-level education, training, and/or technical experience that (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (1) Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering position. (2) Written test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam and Puerto Rico. (3) Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the course specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. (4) Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Minimum Qualification GS-09
Possess one year of specialized experience equivalent to the GS-07 level defined as one or more of the following: 1) Assisting in the design and development of construction drawings and specifications for civil engineering projects. 2) Assisting with construction inspection oversight 3) Performing assigned engineering project tasks under the supervision of a senior engineer, OR
Possess 2 years of progressively higher-level graduate education leading to a master's degree or master's or equivalent graduate degree in and engineering program of study, OR
Completion of a 5-yearprogram of study of at least 160 semester hours leading to a bachelor's degree in engineering and 1 year of appropriate professional experience, OR
Possess a combination of superior academic achievement and 1 year of appropriate professional experience, OR
Possess a combination of specialized experience and education (only graduate education in excess of 18 semester hours may be used to qualify applicants for this grade level). Professional engineering experience is defined as nonroutine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.
Minimum Qualification GS-11
Possess one year of specialized experience equivalent to at least the GS-09 grade level. Specialized experience must include project management of a variety of projects related to infrastructure systems such as water control structures, buildings, water systems, waster water systems, and pavements; experience in reviewing and/or preparing design drawings, drafting project specifications, evaluating contractor bids, and cost estimating; experience in on site construction inspection, OR
Possess 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree in a related field, OR
Possess a combination of education and specialized experience which when combined total 100% of the requirement.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
PROOF OF EDUCATION: All applicants who are using education or a combination of education and experience to qualify must submit copies of official or unofficial transcripts which include grades, credit hours earned, major(s), grade point average or class ranking, institution name, and student name. If any required coursework is not easily recognizable on transcripts, or if you believe a portion of a particular course can be credited toward meeting an educational requirement, you must also provide a memorandum on letterhead from the institution's registrar, dean, or other appropriate official stating the percentage of the course that should be considered to meet the requirement and the equivalent number of units. Unofficial transcripts are acceptable; however, if you are selected for the position, you will be required to produce the original official transcripts.
PASS/FAIL COURSES: If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.
GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education. For further information, visit: Recognition of Foreign Qualifications | International Affairs Office (ed.gov)
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
All applicants who submit a complete and legible application by the closing date of this vacancy announcement {or cut-off} will have their qualifications reviewed to determine if they possess the following knowledge, skills and abilities required to successfully perform the work of this position.
- Knowledge of engineering analyses to include performing and/or coordinating technical planning activities; data collection to include validation and management; modeling and data analyses; analyses of site location and/or conditions; risk estimation and analyses; or analyses of instrumentation data.
- Knowledge of Engineering Design to complete and/or review engineering designs to include: 1) planning and conducting engineering studies or evaluations such as preliminary, appraisal, feasibility, final design, and value planning/value engineering; 2) creating, performing, reviewing, checking, and/or modeling engineering designs; 3) developing/drafting design criteria, procedures, and instructions; 4) contributing to the design and/or modifications of new or existing features to mitigate static, dynamic, and hydrologic/hydraulic loadings; or 5) design, installation, and maintenance of instrumentation systems to provide engineering data for analysis and/or operational decision support.
- Ability to prepare and review technical documentation such as technical memorandums and reports, engineering study analyses and results, correspondence, publications, design criteria, calculations, design summaries, design standards, designer's operating criteria, operating procedures, evaluation and oversight reports, value studies reports, inspection and assessment reviews, impact assessments, permit applications, emergency action plans and exercises, construction plans and reports, quantity estimate worksheets, specifications, constructability reviews, solicitation packages, required planning, final design, and procurement construction cost estimates such as Independent Government Cost Estimates (IGCE) and contract correspondence including responses to submittals and Request for Information (RFI).
- Ability to plan, schedule, coordinate, and conduct civil engineering facility examinations, reviews, and/or inspections which include conducting condition assessments and construction and transfer inspections; identifying deficiencies relative to design criteria, applicable codes and standards, or state or federal statutes or regulations; calculating preliminary estimates for repairs; coordinating with internal and external partners; documenting and presenting results; identifying future needs for the asset investment such as extraordinary maintenance and rehabilitation; and project management planning.
Applicants eligible for priority consideration under DOI's Career Transition Assistance Program/Plan, employees eligible under the Interagency Career Transition Plan (ICTAP). Eligible candidates on the Reemployment Placement List (RPL). A qualified and eligible permanent DOI employee may be selected before an ICTAP eligible.
Required Documents
You must submit a complete application package. We will not make assumptions about your experience and/or education.
Required Documents:
Resume: You are highly encouraged to use USAJOBS Resume Builder to ensure all required information is included in your Resume. If you use your own resume, curriculum vitae, or any other written form you choose then you must describe your job-related qualifications that includes beginning and ending dates for paid and non-paid work experience, hours worked per week, month and year of employment for each job title listed and description of job duties. Note: Current and former Federal employees should include the grade level of their federal positions. Include name and address of employer, supervisor name and telephone number. Additional information on what to include can be found here. Your experience needs to address every required qualification. Note: Failure to provide ALL required information on your resume will result in loss of consideration due to an incomplete application package.
College Transcripts: Unofficial transcripts are acceptable. A copy of your official transcripts may be required if you are selected.
Additional Documentation if applicable:
CTAP/ICTAP Documentation: If you are applying under CTAP or ICTAP, you MUST submit proof of eligibility under 5 CFR 330.602(a) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of your most recent performance rating, and a copy of your most recent SF-50 (Notification of Personnel Action) showing your position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP or ICTAP eligible.
Current and former federal employees - It is recommended that you submit a copy of your SF-50(s) (Notification of Personnel Action) to support your experience. Examples of appropriate SF-50s include appointments/separations, promotions, within-grade increases.
Cover Letter
Failure to submit any of the above-mentioned required documents may result in loss of consideration due to an incomplete application package. It is your responsibility to ensure all required documents have been submitted.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Review the appointment eligibility criteria in the application preview linked below: The eligibility section of the application allows you to choose how you wish to be considered for this vacancy announcement. You will ONLY be considered for the eligibilities that you select "yes" to and submit the required supporting documentation, as listed in the Required Documents section or the application text.
To apply for this position, you must provide a complete Application Package. See required documents section.
Click 'Apply' to create an account or log in to your existing USAJOBS account.
- Follow the prompts to complete the assessment questionnaire and upload required documents. To preview the assessment questionnaire, click https://apply.usastaffing.gov/ViewQuestionnaire/12440043.
- Please ensure you check the acknowledgement checkbox then click the Submit Application button to submit your application.
- Applications must be received by 06/28/2024, 11:59pm ET to receive consideration.
- Check application status by logging into your USAJOBS account, in Applications tab, click the position title you applied to for the status. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
If you are unable to apply online, you must request an alternative application which is available from the Human Resources Office. Please contact the Human Resources Office via email at fwshiring@fws.gov.
Next steps
Once you submit all the required documents and the online application in USAJOBS, you will receive an acknowledgement email that your submission was successful. After the evaluation process is complete, you will be notified of your status and/or referral to the hiring official. If further evaluation or interviews are required, you will be contacted by the hiring official.
You will be notified if this job is filled or canceled. Timelines for this process vary widely.
You may check the status of your application at any time by logging in to your USAJOBS account as we will not be responding to inquiries about the status of applications as long as the system has been updated.
|