Summary
This position is located in the Federal Highway Administration (FHWA), Federal Lands Highway Division, and is responsible for implementing the bridge and structural portions of Federal Lands Highway's (FLH) program. The program provides structural design and construction services to projects primarily located on Federal lands managed by other Federal agencies, such as the National Park Service and U.S. Forest Service, and cover a multi-state area.
Clarification from the agency
Applications will be accepted from any U.S. citizen.
Direct Hire Authority will be used to fill this position. The 'Rule of Three', Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy.
This is not a Bargaining unit position.
Duties
As a Civil Engineer (Highway-Construction), you will:
- Interpret and apply relevant structural codes and guidelines for design, construction, testing, and maintenance of structures, including seismic design and retrofit; determine structural design parameters; design approved structures using appropriate mathematical analysis for loading conditions.
- Develop Plans, Specifications & Estimates (PS&E) for bridges and other highway structures that comply with FLH Bridge Design Manual, AASHTO LRFD Bridge Design Specifications, AASHTO Construction Specifications, and other appropriate standards and guidelines.
- Use MicroStation, Computer Aided Design and Drafting (CADD), and structural analysis computer programs/software to design structures.
- Use advanced analysis including concrete, steel, and prestressed concrete design for both new construction and rehabilitation to address project needs.
- Use the most current technologies, standards, and practices in the development of projects. Provide technical assistance in the review of structures construction submittals or proposals, issue resolution, and field support.
The ideal candidate for this position is a seasoned mid-career structural engineer with experience independently and effectively working in multi-disciplinary teams; providing bridge design services as well as developing or leading the development of Plans, Specifications, and Estimates (PS&E) packages; and using CADD and design software programs in detailing structures.
Conditions of Employment
- You must be a U.S. citizen & meet specialized experience to qualify
- Submit application and resume online by 11:59 PM EST on the closing date
- Required documents must be submitted by the closing date.
- Direct Hire Authority will be used to fill this position
CONDITIONS OF EMPLOYMENT:
- SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service.
- BACKGROUND INVESTIGATION: If you are not a current Federal employee, you will be required to complete a background/security investigation and meet preliminary requirements prior to onboarding.
- PCS/RELOCATION/RECRUITMENT: Permanent Change of Station (PCS), Relocation, and Recruitment Incentive authorization varies by position/selection and a service agreement may be required.
- GOVERNMENT TRAVEL CARD: This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only.
- PHYSICAL CONDITIONS: Some walking, climbing, stooping or bending is involved in activities, such as scoping trips, inspections of existing bridges or construction projects. Scoping trips or inspections in the field involve exposure to both hot and cold weather and hazards of construction equipment and occasionally working high above ground level.
- PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed).
- TELEWORK ELIGIBILITY: This position is approved for telework. The number of telework days approved is determined by the agency policy, the approval of your immediate supervisor, and if applicable, approval of additional officials. You are required to report to the office on a regular basis since this is not a full-time telework position or approved as a remote work position.
Qualifications
To meet the basic qualifications for this position, you must (1) meet the Mandatory Education Requirement for the series, (2) provide a copy of your transcripts or other applicable documentation for verification, AND (3) meet the specialized experience requirements for each grade you are applying to. Please review the following information before proceeding with the application process:
(1) All applicants must meet the requirements under A or B to qualify for applying to an engineering position.
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) that included differential and integral calculus and courses (more advanced that first year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials; (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials; and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics;
OR
B. Combination of education or training: college level education, training and/or technical experience that has furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:
- Professional registration or licensure - current registration as an Engineer Intern (EI), engineer in Training (EIT), or licensure as a Professional Engineer (PE).
- Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
- Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences which included the courses as specified in Paragraph A above.
- Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. There should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering type experience. This must be clearly described in your resume.
For additional information, please refer to the OPM qualifications standard for GS-800: All Professional Engineering Positions qualifications at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf.
(2) Upload the appropriate document(s) to your application for verification purposes.
(3) Specialized Experience: To determine which grade(s) you may be eligible for, review the following grade specific details. You will be asked a few questions as part of your application but make sure to verify how you meet this experience in your resume or you may be deemed ineligible.
For the GS-11:
On Experience, you must have at least one year of specialized experience, equal or equivalent to the GS-09 grade levelwhich included:
- Experience equal or equivalent to providing engineering design support services to a project team in the development of structures or structural components for highway improvement projects such as culverts, bridge superstructures, bridge substructures, short single span bridges, and/or simple and continuous span bridges; AND
- Experience equal or equivalent to using design software programs to design bridges or structural components and Computer Aided Design and Drafting (CADD) software in detailing bridge structures for highway projects.
Or on Education, you must have 3 years of progressively higher level graduate education leading to a Ph.D. degree OR Ph.D. or equivalent doctoral degree.
You can also have a combination of graduate education and experience. This must be fully supported by your resume and transcripts, provided with your application.
For the GS-12:
On Experience, you must have at least one year of specialized experience, equal or equivalent to the GS-11 grade levelwhich included:
- Experience providing engineering design services, construction support, and technical assistance in the development of multi-span bridges that entail horizontal and vertical curvatures and skewed geometry for highway improvement projects (e.g., producing Plans, Specifications, and Estimates packages (PS&E) and layout drawings, reviewing contractor submittals, and resolving construction issues); AND
- Experience communicating and coordinating the design and detailing of bridge structure projects with internal teams; AND
- Experience using design software programs to analyze and design bridges and Computer Aided Design and Drafting (CADD) software in detailing structures.
Although you must first meet the mandatory education requirement, you cannot qualify for the GS-12 grade based on education, you must meet the specialized experience, which is cited above.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will also be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
- Civil Engineering - Knowledge of the concepts, principles, theories, and methods required to plan, design, construct, operate, and maintain facilities such as buildings, transportation systems, water and sanitary systems, and other public works systems.
- Bridge Design - Knowledge of the guidelines, regulations, and procedures associated with managing the review oversight of bridge design programs, including application of compliance rules and criteria.
- Communications - Expresses information (for example, ideas or facts) to individuals or groups effectively. Writes in a clear, concise, organized, and convincing manner for the intended audience.
For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Students enrolled in a qualifying degree program can apply to the GS-11 grade based on education if the anticipated graduation date is within six months of the closing date of this announcement. If selected, the final transcript must be received before your start date. Other applicants must meet all qualification requirements by the closing date of this announcement.
Education
See the Qualifications section for the mandatory education requirements for this series.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Given our continuing need for professionals in this field, we may routinely review applications and refer candidates for potential interviews multiple times during the open period of the announcement.
When an applicant list is requested, all applications received by that request date will be reviewed to determine if the basic qualifications for this position, and grades applied to, are met. Applications that are verified to meet the basic qualifications will be referred to the selecting official(s) for further review and consideration. From that point on the selecting official determines all aspects of the hiring process. If they wish to contact you for an interview or for selection, they will do so directly. Equal consideration will be given to all applications received. This announcement may close earlier or be extended, NTE a total of 1 year.
Note that applications received under a direct hire public notice may or may not result in a referral or selection. Also, management has the discretion to select at any grade level covered by public notice.
Applicants will not be rated or ranked. Veteran’s Preference does NOT apply.
DESCRIBING YOUR EXPERIENCE: PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. All answers provided in the on-line process must be substantiated by a resume. If, upon review, it is determined that your resume and/or supporting documents do not support your answer choices, your application may be removed from consideration. You may preview questions for this vacancy.
ALL Applicants must provide a resume that fully supports the required specialized experience and was created within USA Jobs Resume Builder and respond to the vacancy questions by the closing date of the vacancy.
TRANSCRIPTS - Transcripts are REQUIRED as there is a mandatory education requirement for the series, and also if you are applying based on education for the GS-11 grade. The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements.
- Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.
- If you are qualifying based on possessing a current/unexpired Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of the PE license or written document showing proof of passing the EIT.
DISPLACED EMPLOYEES: Displaced employees may be eligible for ICTAP or CTAP priority consideration. For more information, please review the OPM Employee's Guide to Career Transition. If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the well qualified standards for this vacancy (meeting minimum requirements for position and scoring at least an 85 or falling in the Gold Category) and provide all of the following documents:
- your most recent performance appraisal,
- the proof of eligibility letter from the Agency, and
- your most current SF-50, displaying current series and grade.
Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USA Jobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
You must submit a complete application package (including resume, vacancy questions and supporting documents) no later than 11:59 pm (EST) on the closing date of the announcement.
- To begin, click the "Apply Online" button on the job announcement posting.
- Follow the directions to register, submit all required documents and complete the assessment questionnaire.
- You may review your saved application(s) at https://my.usajobs.gov.
If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov
Next steps
You may check your application status by logging into USAJobs.com. (Select "My USAJOBS" and click "Applications"). A Human Resources Specialist will evaluate your application either during the early consideration request(s) or within two weeks of the vacancy closing, depending on when you submit your application. Qualified candidates will be referred to the hiring manager. If you are selected for an interview, the hiring agency will contact you directly. Once the position is filled, we will notify all applicants of their final status.
|