Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (TITLE 32), Position Description Number D1201000 and is part of the IL CSMS 2, National Guard.
Clarification from the agency
About the Position: This is an open continuous announcement. Initial pull will be 5 April 2024. Recruitment will continue through the announcement closing date until the position is filled.
Duties
As a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (TITLE 32), WG-2602-5/8/11, you will perform calibration, diagnostics repair, and certification of electronic, mechanical, and radiation Test Measurement and Diagnostic Equipment (TMDE).
This is NOT an all-inclusive list:
- Align, troubleshoot, test, inspect, repair, modify, calibrate and certify precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters.
- Calibrate and repair TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc.
- Operate equipment to complete range checking for proper operation of positioning controls.
- Follow appropriate safety procedures, with special care being exercised while calibrating high voltage, radio frequency, radioactive sources and high-pressure instruments and gages.
- Diagnose equipment, make repairs, and replace defective parts/components such as integrated circuits, printed circuit boards, electronic condition coils, radiation detector boards/circuits, crystals, transistors, tubes, transformers, condensers, diodes, relays potentiometers, and related components.
- Isolate faults by taking measurements and comparisons in voltage, amperage, ohms, henries, power factor, watts, temperature, humidity, microns, foot-pounds, decibels, sensitivity, noise, stability, Voltage Standard Wave Ratio (VSWR), impedance, phase, absolute pressure, time intervals, displacement, flow rate, etc., to determine performance of equipment.
- If signal is distorted, trace it through electronic stages to locate malfunctioning part.
- Refer to technical manuals and manufactures specifications to obtain information on operation characteristics of circuit components such as integrated circuits, microprocessors, decoders, latching networks, notch filters, logics, controllers, programmable gain amplifiers, digital displays, transistors, tubes, transformers, coils, relays, motors, and similar devices.
- Perform functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements.
- Analyze and isolate component malfunctions; calculate and determine tolerances; and perform tests and calibrations in accordance with instructions, which are often vague and incomplete, and may require the preparation of diagrams and instructions to facilitate the calibration action.
- Set up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests.
- Following repair, test by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern.
Conditions of Employment
This is an excepted service position that requires membership in the Illinois National Guard and in the military grade listed in the announcement. This is required prior to the effective date of placement. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Selectee will be required to wear the military uniform.
Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
Males born after 31 December 1959 must be registered for Selective Service.
Federal employment suitability as determined by a background investigation.
May be required to successfully complete a probationary period.
This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
Participation in direct deposit is mandatory.
Recruitment and relocation incentives may be available for this position.
Qualifications
AREA OF CONSIDERATION: The areas of considerations for this position, Title 32 Excepted Service (32 U.S. Code § 709), will be in the following manner and sequence,
- The FIRST area of consideration for this position will be all excepted permanent and indefinite temporary technicians within the ILNG.
- The SECOND area of consideration will be all current Federal Employees.
- The THIRD area of consideration will be all Federal re-employment eligible.
- The FOURTH area of consideration will be applicants willing to become T32 Dual Status Technicians and gain ILNG membership.
- The FIFTH area of consideration will U.S. Citizens.
Military Grades: Enlisted/Warrant Officer - Minimum Rank E-1; Maximum Rank CW3
GENERAL EXPERIENCE: Must have experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance; experience in the use of various precision measurement instruments and standards.
SPECIALIZED EXPERIENCE: WG-11 Level: Must possess experience or training in the basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods; experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing; originate test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups; experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials; experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards; experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment. WG-08 Level: Must possess experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. WG-05 level: Must possess experience or training in performing simple mechanical installations and adjustments; experience demonstrating the ability to recognize obvious malfunctions; experience using common hand tools; experience that demonstrating the ability to follow written instructions.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.
Education
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone. No substitution of education for experience is permitted for this occupational series and grade.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
- Knowledge of Equipment Assembly, Installation, Repair, etc.
- Trouble shooting (Electronic Equipment)
- Use of Test Equipment: Electronics
To apply for this position, you must submit a complete Application Package which includes:
REQUIRED DOCUMENTS: Your resume that clearly demonstrates experience that meets the requirements of this position. Your resume must contain identifiable information such as your name, address, and phone number. It should also show your work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
- SF-50 - Must include if you are a current or previous federal employee.
Other supporting documents (as applicable):
- Certifications
- DD-214
- SF-50 - Please include if you are a current or previous federal employee.
- Official Transcript
- NGIL Form 73
https://www.il.ngb.army.mil/Portals/30/Documents/Jobs/NGILForm73.pdf?ver=2019-05-01-161908-260
*NGIL Form 73 - Illinois National Guard Technician Program Supplement to Application for Dual Status (DS), to reflect military qualifications.
Complete and accurate data is essential to ensure fair evaluation, applicants with no military qualifications must submit form stating, "not applicable" and signature on page 2 of the NGIL Form 73.
Documents NOT accepted: photographs, copies of position descriptions, training certificates, performance ratings, awards, and letters of appreciation.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12341542
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
|