Summary
THIS IS A NATIONAL GUARD TITLE 5 EXCEPTED SERVICE POSITION.
This National Guard position is for Enviromental Engineering, Position Description Number T5210000 and is part of the 158th Fighter Wing Command of the Vermont Air National Guard.
This position is a dual announcement, also advertised as a permanent Title 5 vacancy announcement,
VT-11942134-AR-24-37 https://www.usajobs.gov/GetJob/ViewDetails/795166200. One qualified candidate will be selected from the dual announcement.
This job is open to
Clarification from the agency
Priority Placement Program will be cleared.
Area I: Area I: Current On-board Title 5 or Title 32 Dual Status Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite or 4-Term ) - Only those current Vermont National Guard employees who are in permanent, indefinite, or term technician status as result of being competitively hired by the VTNG.
Area II: All current Federal Employees from any agency.
Area III: All current and former members of the VTNG
Area IV: United States citizens
Duties
This position is located in the Base Environmental Management Office and serves as the installation Environmental Program Manager for the assigned Air National Guard (ANG) installation. Serves as the single point of contact for the initiation, development, and execution of all environmental activities and development of regulatory guidance for an installation and its immediate geographic region, with a collaborative influence extending to a broader area. Regional responsibilities may include, but are not limited to: aircraft mishap response, off site release assessments, air emission estimates, storm water discharge monitoring, and hazardous material shipments. Broader geographic impacts may include, but are not limited to: exporting project solutions, staff assistance visits, compliance assessments, and partnering with other units and intra-agency contacts to address challenges that affect multiple ANG units within or beyond state boundaries. Accomplishes long range environmental planning, budgeting, and programming activities that impacts the installation and the region. Reviews engineering planning and construction documents for environmental considerations as required.
MAJOR DUTIES:
1. Manages a most complex, highly technical environmental management and protection program and serves as the installation's single most knowledgeable expert on DoD, AF, ANG, EPA state specific environmental laws and regulations. Environmental Management duties and responsibilities include, but are not limited to: (1) Hazardous Waste Management; (2) Storm Water Management and Control; (3) Air Quality; (4) Water Quality; (5) Pollution Prevention; (6) Green Procurement;(7) Environmental Restoration Program (ERP); (8) Cultural and Natural Resources Management; (9) Spill Prevention and Response; (10) Environmental Management System; (11) Environmental Impact Analysis Program (EIAP) Management; and (12) Qualified Recycling Program Management.
2. Manages the entire Planning, Programming, Budget and Execution (PPB&E) for the installations environmental quality (EQ) program area. Additional budgetary responsibilities may include working with the Defense Logistics Agency (DLA) Energy and Environment for recurring environmental costs related to DLA owned fuel systems. Provides financial analysis and planning for Environmental resource requirements, to include planning, programming and execution. Responsible for planning, budgeting, and reporting environmental financial information through directed financial databases.
3. Prepares and guides implementation of environmental program plans. Environmental program plans can include, but are not limited to (1) Spill Prevention Control and Countermeasures (SPCC) Plan; (2) Storm Water Pollution Prevention Plan (SWPPP); (3) Hazardous Waste Management Plan (HWMP); (4) Air Emissions Inventory (AEI); (5) Green Procurement Plan (GPP); (6) Integrated Pest Management Plan; (7) Refrigerant Management Plan; (8) Cultural or Natural Resources Management Plans; (9) Environmental Management System (EMS) Plans; and (10) Integrated Solid Waste Management Plan.
4.Serves as an active member of the installation Design Working Group (DWG) accomplishing short term and long-range planning in conjunction with Civil Engineering for future military construction and renovation projects. Responsible for ensuring all necessary environmental permits for related construction projects are obtained and necessary plans developed and implemented.
5. In accordance with the Environmental Impact Analysis Process (EIAP)statutory requirements, the incumbent is responsible for evaluating the environmental impact of construction and renovation projects. Facilitates the decision making process ensuring due consideration is given to the natural environment, social, political, economic, and governance factors and provides a holistic frame work designed for the achievement of sustainable outcomes.
6. Plans and schedules work in a manner that promotes a smooth flow and even distribution. Coordinates plans and schedules with other organization managers and customers as appropriate. Identifies need for changes in priorities and takes action to implement such changes. Plans work to be accomplished by subordinates, sets and adjusts short-term priorities, and prepares schedules. Assigns work to subordinate employees based on organization priorities and consideration of difficulty and requirements of assignments such that the experience, training, and abilities of staff are effectively utilized to meet organization and customer needs. Balances workload and provides advice, guidance, and direction on a wide range of policy, investigative, inspection/exercise, strategic planning, and administrative issues. Structures assignments to create effective and economical positions. Coordinates with other organization managers and customers as appropriate.
**REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES**
Requirements
Conditions of Employment
- Work may require access to classified information. Must be able to obtain and maintain the appropriate security clearance.
- The incumbent of this position description must have at a minimum, a completed National Agency Check (NAC) prior to position assignment
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
- The employee may be required to travel in military and/or commercial aircraft to perform temporary duty assignments.
- The work may require the employee to drive a motor vehicle and if so, an appropriate valid driver's license is required.
- Participation in direct deposit is mandatory.
- May be required to successfully complete a probationary period.
- This position is subject to provisions of the DoD Priority Placement Program.
- Males born after 31 December 1959 must be registered for Selective Service.
Qualifications
OPEN AREAS OF CONSIDERATION: AREA 1, 2,3, 4
Priority Placement Program will be cleared.
Area I: Area I: Current On-board Title 5 or Title 32 Dual Status Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite or 4-Term ) - Only those current Vermont National Guard employees who are in permanent, indefinite, or term technician status as result of being competitively hired by the VTNG.
Area II: All current Federal Employees from any agency.
Area III: All current and former members of the VTNG
Area IV: United States citizens
Basic requirements for Engineering positions:
The Engineering occupation has specific educational requirements. You are required to submit a copy of your official transcript with your application package to validate education requirements.
Application packages without a transcript will be determined incomplete.
BASIC REQUIREMENT:
A. Degree: Bachelor's degree (or higher degree) in engineering.
To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
IN ADDITION TO MEETING THE BASIC REQUIREMENT, to qualify for this position you must also meet the specialized experience described below.
SPECIALIZED EXPERIENCE GS-12- must have 1-year equivalent to at least next lower grade level experience, education, or training for management, supervision, or performance of (1) planning, designing, construction, and/or maintaining structures and facilities; and (2) investigating, measuring, surveying, and mapping the earth's physical features.
FEDERALTIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
OTHER CONDITIONS OF EMPLOYMENT & NOTES:
-This position is subject to the Lautenberg amendment to the gun control act of 1968 which makes it a felony for anyone who has been convicted of a misdemeanor crime of domestic violence to ship, transport, possess, or receive firearms or ammunition. Civilian personnel of the Department of the Defense are not exempt from this provision. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
-This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration. This designation will not exceed 14 calendar days per year unless otherwise approved in advance by the TAG.
Please be advised:
1. Specialized experience will be used to determine qualifications for the announced position.
2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed.
3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts.
Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement.
Education
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
- Professional knowledge and abilities applicable to a wide range of environmental engineering duties; and the skill to modify standard practices and adapt equipment or techniques to solve a variety of problems; adapt precedents or make significant departures from previous approaches to similar projects to provide for the specialized requirements of projects; and apply standard practices of related engineering disciplines as they relate to environmental engineering functions.
- In depth knowledge of environmental sciences and related disciplines, the effect of actions and technology on the environment, the means of preventing or reducing pollution, and the relationship between environmental factors and human health and well-being.
- Comprehensive knowledge of Environmental Protection Programs that involve federal/state compliance procedures and standards associated with pollution prevention, hazardous waste management/minimization, recycling and environmental impact.
- Substantial knowledge of contract administration to negotiate and provide technical oversight, monitor vendor performance, and ensure compliance with terms of contract.
- Systematic skill in planning, organizing, directing, coordinating, operating, and evaluating Installation Environmental programs.
- Detailed knowledge of analytical and evaluative methods and procedures, and skill in evaluating related operations sufficient to analyze standards, procedures, and work processes to continually improve them to meet customer requirements and to ensure compliance with regulatory provisions.
- Knowledge of and skill in applying basic budgetary policies and procedures to provide a financial analysis of environmental resource requirements.
- Comprehensive working knowledge of pertinent laws, regulations, policies, and precedents affecting the Installation Environmental Management Program to include federal/state/local/DoD/AF/ANG requirements.
- Knowledge of installation Environmental Management roles and responsibilities, and the ability to recognize the need for and to develop local guidelines/instructions to meet the specific installation needs.
- Knowledge and skill sufficient to adapt standard practices, equipment, or techniques in preparing specifications and designs (or monitoring those prepared by others) for the improvement or alteration of existing or the eventual construction of new facilities.
Please be advised that the applicant rating will be evaluated on the following occupational competencies:
1) Planning
2) Accountability
3) Compliance
4) Oral Communication
5) Decision Making
6) Interpersonal Skills
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: resume must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.
2. Official Transcripts
Other supporting documents (as applicable):
- DD-214
- Official Transcripts
- Veterans Preference
- Certifications
- For current Federal employees: Latest SF 50, Personnel Action
- NGB 22 (if you are a former member of the VTNG)
Helpful Hints for Applying:
- Ensure that your resume contains your full name, address and phone.
- Include details about the experience that relates to the position you are applying for.
- Be specific and always include Month and Year for the dates of your experience.
- Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held.
In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.
If you are using education to qualify for this position or education is a mandatory requirement to meet qualifications, You must submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
|