Summary
This position is located at Bureau of Engraving and Printing, with in the Facilities Engineering Division. As an Electrical Engineer, you will function as the principal electrical engineer and manage the electrical power distribution system of this industrial facility.
This job is open to
The public
U.S. Citizens, Nationals or those who owe allegiance to the U.S.
Career transition (CTAP, ICTAP, RPL)
Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants.
Clarification from the agency
1. U.S. citizens or U.S. Nationals; no prior Federal experience is required. 2. CTAP/ICTAP eligibles
Duties
As an Electrical Engineer, you will:
- Perform a wide range of electrical engineering projects for complex construction, renovation, and maintenance projects.
- Develop methods, procedures, and specifications to be used for highly complex electrical systems.
- Prepare technical reports on highly complex electrical engineering matters which influence the current and future programs of the bureau.
- Interpret policies, regulations, and engineering criteria and advise management on all matters pertaining to highly complex electrical systems.
Requirements
Conditions of employment
- All newly appointed employees to the competitive (or excepted) service are subject to a probationary (or trial) period. During this time, your performance, conduct, and suitability for continued employment will be evaluated. You will not automatically convert to permanent status at the end of the probationary (or trial) period. Your supervisor must affirmatively determine that continued employment is in the best interest of the Federal service. If no certification is made before the probationary (or trial) period ends, your appointment will be terminated. You are encouraged to actively engage with your supervisor, seek feedback, and understand role expectations. Additional guidance and support will be provided during onboarding.
- Public Trust - Background Investigation will be required.
- Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency.
- Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer.
- Undergo a tax compliance review.
- If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so.
- Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form I-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S.
- Obtain and use a government-issued charge card for business-related travel.
- File a Confidential Financial Disclosure Report within 30 days of appointment and annually from then on.
- Undergo an income tax verification
- Submit to a drug test prior to your appointment.
Key Requirements:
- Click "Print Preview" to review the entire announcement before applying.
- Must be U.S. Citizen or U.S. National
Qualifications
This opportunity is also open to Status Candidates under Announcement 26-BEP-12997286. Please refer to that announcement for details on open period, eligibility, and how to apply.
You must meet the following requirements by the closing date of this announcement.
Specialized Experience for the GS-13, you must have one year (full 52 weeks) of specialized experience at a level of difficulty and responsibility equivalent to the GS-12 grade level in the Federal service. Specialized experience for this position is defined as:
-Applying principles and practices of electrical engineering in the areas of design, modification, installation or operation of electrical systems; AND
-Collaborating with other professionals on efforts to improve engineering and manufacturing performance.
Education
Education Requirements: The education generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency. Refer to the OPM instructions.
1. Basic Requirements:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Additional information
- We may select from this announcement or any other source to fill one or more vacancies.
- This is a non-bargaining unit position.
- We offer opportunities for telework.
- We offer opportunities for flexible work schedules.
- The facility typically shuts down annually between Christmas and New Year's Day. As such, all BEP employees must take leave for workdays during the shutdown period.
- This position requires that the successful candidate undergo personnel vetting, which includes a background investigation and enrollment upon onboarding into "Continuous Vetting." Enrollment in Continuous Vetting will result in automated record checks being conducted throughout one's employment with Treasury. The successful candidate will also be enrolled into FBI's Rap Back service, which will allow Treasury to receive notification from the FBI of criminal matters (e.g., arrests, charges, convictions) involving enrolled individuals in near real-time. For more information about individual rights, Noncriminal Justice Applicant's Privacy Rights - FBI, FD-258 Privacy Act Statement - FBI, and SEAD-3-Reporting-U.pdf (dni.gov).
- SUITABILITY, CLEARANCE & REQUIREMENTS: A background investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by the Bureau of Engraving and Printing is very thorough. Therefore, it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination or immediate revocation of your interim clearance (if applicable).
Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement.
To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments. (https://appsupport-usastaffing.opm.gov/hc/en-us/sections/45063131363475-Reasonable-Accommodation-Information)
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
After the announcement closes, your resume, supporting documentation, and responses to the questionnaire/assessment will be reviewed to determine whether you meet the minimum qualification requirements. Be sure your resume includes enough detail to support your qualifications.
To be considered for this position, you must complete all required steps in the process. Please be sure that your résumé includes detailed information to support your qualifications for this position; failure to provide sufficient evidence in your résumé may result in a "not qualified" determination.
Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration.
In addition to the application and application questionnaire, this position requires an online assessment that measures critical general competencies required to perform the job.
If you are asked to take the USA Hire Competency Based Assessments, you will be presented with a unique URL to access the USA Hire system. Access to USA Hire is granted through your USAJOBS login credentials. Be sure to review all instructions prior to beginning your USA Hire Assessments.
You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):
- Attention to Detail
- Customer Service
- Decision Making
- Flexibility
- Integrity/Honesty
- Interpersonal Skills
- Learning
- Reasoning
- Self-Management
- Stress Tolerance
- Teamwork
This announcement uses the Rule of Many, a numerical ranking process under which eligible applicants receive a numeric score based on the assessment process for the position. Only applicants who are eligible for veterans' preference receive 5- or 10-point veterans' preference points, which are added to passing scores, as applicable. Applicants are then listed on the certificate in score order, and preference-eligible applicants are listed ahead of non-preference eligibles with the same score.
This announcement uses the cut-off score referral method under 5 CFR 332.402(b)(1). Applicants who achieve or exceed the established cut-off score of
90 will be referred for consideration. If fewer than three eligible and available candidates per vacancy are available, we may lower the cut score in accordance with our pre-announced supplement strategy and applicable policy until a minimum of three candidates per vacancy are eligible to be referred. When a new cut score is established, all applicants tied at that cut score will also be referred.
Referral: If you are among the top qualified candidates, your application may be referred to a selecting official for consideration. You may be required to participate in a selection interview. We will not reimburse costs related to the interview such as travel to and from the interview site.
Simultaneous Listing: Candidates may be referred simultaneously on multiple certificates for which they are interested, eligible, and within reach, unless otherwise provided for good administration and identified in advance.
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
All applicants must submit a résumé showing work schedule, hours worked per week, dates of employment and duties performed. The experience may have been gained in either the public, private sector or volunteer service. One year of experience refers to full-time work; part-time work is considered on a prorated basis. All applicants are required to submit arésumé either by creating one in USAJOBS or uploading one of their own choosing. (Cover letters are optional.) Please limit your resume to two-pages. Applicants with resumes exceeding two-pages will be removed from consideration. We suggest that you preview the online questions, as you may need to customize your résumé to ensure that it supports your responses to these questions. Please view résume tips.
VETERANS' PREFERENCE DOCUMENTATION: If you are claiming veteran's preference, please see applicant guide for required documentation. In order to be considered for veteran's preference, you must submit all required documentation as outlined in the applicant guide.
CAREER TRANSITION ASSISTANCE PLAN (CTAP) OR INTERAGENCY CAREER TRANSITION ASSISTANCE PLAN (ICTAP) DOCUMENTATION: If you are a displaced or surplus Federal employee, click CTAP/ICTAP for eligibility and a detailed list of required documents you must submit in order to be eligible.
EDUCATION DOCUMENTATION:
For positions with an education requirement, or if you are qualifying for this position by substituting education or training for experience, submit a copy of your transcripts or a list of courses showing title, number of credits, grade, and date of completion.
If you are a displaced or surplus Federal employee eligible for the Career Transition Assistance Plan (CTAP)/Interagency Career Transition Assistance Plan (ICTAP), achieve a well-qualified score of 85 or higher to receive priority consideration.
Optional Essay Questions: Applicants may choose to respond to four short essay questions (200 words max each) to help us better understand your alignment with the agency's mission. These responses are optional and will not affect the applicant's eligibility.
When the Bureau of Engraving and Printing completes its hiring, the remaining list of qualified candidates may be shared with additional Treasury bureaus. You will have an opportunity to opt-in if you would like your name, application material, and assessment results shared to be considered for employment with additional Treasury bureaus. There is no guarantee of further consideration, and you can continue to explore other job opportunity announcements.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Are you unsure how to write your federal resume? We are here to help. The Treasury Recruitment Service regularly offers Writing Your Federal Resume training sessions, and other career-related information sessions, to assist you in your career search journey. To register for a session, click here to go to our Career Information Sessions webpage."
The Bureau of Engraving and Printing provides reasonable accommodation to applicants with disabilities on a case-by-case basis. Please contact us if you require this for any part of the application and hiring process.
The application process is as follows:
- Click the Apply Online button.
- Answer the questions presented in the application and attach all necessary supporting documentation.
- Click the Submit Application button prior to 11:59 PM (ET) on the announcement closing date.
- If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice.
- Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials.
- Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended.
- Set aside about two (2) hours to take the USA Hire Assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link.
Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused.
Visit the
USA Hire Applicant Resource Center for practice assessments and assessment preparation resources at:
https://support-usahire.opm.gov/hc/en-us
To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click
Edit my application. This option will no longer be available once the announcement has closed.
To view the announcement status or your application status: Click on this:
https://www.usajobs.gov/Help/how-to/application/status/
Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application.
Click here for Computer System Requirements
(https://help.usastaffing.gov/Apply/index.php?title=USA_Hire_System_Requirements)
If you wish to make changes/updates to your application and the vacancy is still open, you can click on the job announcement and "Update Application" to be taken back to your application.
No updates can be made once the announcement has closed.
For additional information on the Rehabilitation Act of 1973 or the ADA, please click on the links below:
The Fair Chance to Compete for Jobs Act prohibits the Department of Treasury and its bureaus from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Treasury by email at, FairChanceAct@treasury.gov.
To learn more, please visit our page at: Treasury.gov/fairchanceact.
To preview the questionnaire:
https://apply.usastaffing.gov/ViewQuestionnaire/12997285
For additional information on how to apply, please visit the Partnership for Public Service's
Go Government website.
Next steps
Based on your application and your responses to the application questionnaire, you may be presented with instructions on how to access the USA Hire system to complete the online assessments. The online assessments must be completed within 48 hours following the close of this announcement. You will have the opportunity to request a testing accommodation for the assessment should you have a disability covered under the Americans with Disabilities Act (ADA).
Your assessment results will be kept on record for one year and used toward future positions for which you might apply that require the same assessments.
Please notify us if your contact information changes after the closing date of the announcement. Also, note that if you provide an email address that is inaccurate or if your mailbox is full or blocked (e.g., spam-blocker), you may not receive important communication that could affect your consideration for this position.