General Engineer

Clarification from the agency

This vacancy announcement is open to Federal employees and other eligible applicants.

The duties and responsibilities for a General Engineer, GS-0801-13 generally include, but are not limited to, the following:

• Directs and manages whole projects, elements or phases of projects.
• Provides engineering analysis for special projects, future projects, and advanced planning of new systems.
• Participates in preliminary and critical design reviews.
• Performs planning and design work for substantial multi-phase construction, renovation and improvement projects for a variety of real property facilities, including utility systems.
• Provides recommendation and guidance to management and various high-level clients on the development of comprehensive planning and acquisition of new major departmental buildings or complexes.

Conditions of employment

• You must be a United States Citizen or National.
• You will be required to complete a pre-employment security investigation and background check which includes a drug screening.
• You may be required to complete a probationary or trial period. See "Additional Information" for specific details.
• Selective Service registration is required for males born on, or after, December 31st 1959. Those not registered should have an approved exemption on file.
• You must meet all eligibility requirements by the closing date of this announcement and continue to meet these requirements throughout the hiring process. Offers can be rescinded if requirements are not met.
• Financial Disclosure: If selected, you may be required to disclose financial information in accordance with DOJ and Federal ethics guidelines.
• A USA Hire assessment is required. An email will be sent with additional information after you submit your application. You will have 48 hours from the closing date of this announcement to complete the assessment.

Qualifications

To qualify for the position of General Engineer, at GS-0801-13, you must meet the basic qualification requirements listed below.

Basic Requirement:

A. Degree, Engineering: To be acceptable, the program must (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry)in five of the following seven areas of engineering science or physics; (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties) and (g) any other comparable area of fundamental engineering science or physic, such as optics, heat transfer soil mechanics, or electronics;

OR

B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such a background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type, e.g., in interdisciplinary positions.

In addition to meeting the basic requirements above, to qualify for this position you must also meet the specialized experience listed below:

Specialized Experience: Applicants must have at least one year of specialized experience at the next lower grade level, GS-12, or equivalent pay band in the Federal service. Specialized experience is defined as utilizing civil and/or mechanical engineering practices to develop and manage projects for construction, renovation and improvement of facilities AND developing, writing, and administering construction service contracts.

You MUST meet all qualification requirements, including time-in-grade, by the 10/06/2026 of this announcement.

Your resume must support your responses to the application questionnaire and the qualification requirements. Failure to do so may result in an ineligible rating.See the Required Documents section for important notes about what must be included in your resume.

After you submit this application, you will receive an e-mail informing you that a USA Hire assessment is required of you. You will have 48 hours from the closing date of this announcement 10/06/2026 to complete the assessment as this assessment is part of your application.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

In order to be considered for this position, you must complete all required steps in the process. In addition to the application and application questionnaire, this position requires an online assessment. The online assessment measures critical general competencies required to perform the job. You must meet all qualifications, including meeting or exceeding the cut score on the required assessments.

Your USAHIRE assessment results will be kept on record for one year and used toward future positions for which you might apply that require the same assessments.

Additionally, we will review your supporting documents and resume to determine if you are in the "Area of Consideration" for this vacancy. Government-Wide Merit Promotion vacancies may only accept applications from a limited audience, pay careful attention to the "Who May Apply" and the "Hiring Paths" information. Please follow all instructions carefully. Errors or omissions may affect your eligibility.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

• Attention to Detail
• Customer Service
• Decision Making
• Flexibility
• General Engineering
• Influencing/Negotiating
• Integrity/Honesty
• Interpersonal Skills
• Learning
• Project Management
• Reading Comprehension
• Reasoning
• Self-Management
• Stress Tolerance
• Teamwork
• Writing

It is your responsibility to carefully review the list of required documents below and submit the necessary documentation based on your eligibility.

Resume - All Applicants: You must submit a resume (a two page or less resume is required) containing the following pieces of information for each job entry listed in your employment history:

• Official position title,
• Employer name and contact information,
• Start and end dates (including month and year),
• Indicate full-time or number of hours worked per week if part-time, and
• A list of duties performed and accomplishments.

1. You must submit your most recent SF-50 (Notification of Personnel Action) or equivalent agency form. Do not submit an award SF-50, these do not contain sufficient information about your appointment. Your SF-50 should list the full position title, series, grade and step,organization, duty location, service computation date, effective date, and your service type and tenure status.
2. Submit a copy of your most recent performance evaluation or appraisal, signed, showing your final rating. If a performance appraisal is not available submit a statement explaining why one is not available. Note: See USAJOBS Current & Former Employees for more information.

1. You must submit a copy of your most recent performance appraisal, and
2. A list of any awards (e.g. superior performance awards, special act or achievement awards, quality step increase, etc.) you received in the last 5 years. Any performance appraisal/evaluation and award documentation you provide will be forwarded to the selecting official. The selecting official will review this documentation and give it due weight consideration during the overall selection process. Due weight for performance applies to federal and non-federal work. If you do not have your most recent performance appraisal/evaluation, please submit a statement as to why it is not available.

1. When claiming a Veteran's Preference, you must submit your last DD-214 (Certificate of Release or Discharge from Active Duty) form, specifically the Member #4 Copy, indicating dates and character of service and discharge type.
2. If you are a Veteran with a service-connected disability rating, you will need to additionally submit the SF-15 (Application for 10-point Veterans Preference) and a copy of your VA Letter stating your disability rating.
3. If you are the qualifying parent or spouse of a disabled, deceased, or deployed Veteran, and are seeking a derived preference eligibility, you must submit appropriate supporting documentation such as the Veterans DD-214, SF-15, VA Letter, and/or Permanent Change of Station (PCS) orders. See Veteran Family Preference for more information.
4. For more information on each type of Veterans Preference, and the documentation required for each, see FedsHireVets.

1. Spouse of a member of the armed forces on active duty: documentation showing 1) your spouse's active-duty status and 2) your marriage to the member of the armed forces (i.e., a marriage certificate or other legal documentation verifying marriage).
2. Spouse of service members who incurred a 100% disability because of the service member's active-duty service: documentation showing 1) the member of the armed forces retired, or was released or discharged from active duty, with a disability rating of 100 percent; and 2) documentation of marriage to the member of the armed forces (i.e., a marriage license or other legal documentation verifying marriage).
3. Spouse of service members killed while on active duty: documentation showing a) the member was released or discharged from active duty due to his or her death while on active duty; b) the member of the armed forces was killed while serving on active duty; c) proof of the widow or widower's marriage to the member of the armed forces (i.e., a marriage license or other legal documentation verifying marriage); and d) a statement certifying that the individual seeking to use the authority is the un-remarried widow or widower of the service member.

1. You must submit "proof of a disability" documentation ("Proof of a disability" is a letter stating that you have an intellectual disability, severe physical disability or psychiatric disability).
2. You must get this letter from your doctor, a licensed medical professional, a licensed vocational rehabilitation specialist, or any Federal, state, or local agency that issues or provides disability benefits.
3. For more information about Schedule A and verification requirements, please see OPM's Schedule A site.

Next steps