Summary
About the Position: This position is located within the Tech Lead Group of the Technical Support Branch of the U.S. Army Corps of Engineers, New England District in Concord, MA.
This job is open to
Clarification from the agency
See "Who May Apply" in the "Qualifications" section for more information on who is eligible to apply for this position.
Duties
- Serve as the New England District (NAE) Value Officer planning, formulating, maintaining ,and coordinating an effective Value Program and executing the principles, application, and management of Value Engineering.
- Serve as NAE Quality Manager for a broad range of products and services produced by NAE in support of Civil Works, Military, International and Interagency Support (IIS), and Hazardous, Toxic, and Radioactive Waste (HTRW) programs.
- Lead coordination and development of new or revised quality control procedures for in-house and Architecture/Engineering (A-E) products.
- Serve as Lesson Learned Coordinator and lead investigator on potential A-E Liability cases.
- Compile new quality management requirements and evaluates the impacts thereof to communicate to the appropriate personnel.
- As Quality Manager, implements a framework of quality assurance/quality control (QA/QC) procedures aimed at promoting efficiency and consistency in technical procedures and products.
- Performs analysis and evaluation of NAE’s QC processes in the production of studies, investigations, and designs to ensure compliance with District and corporate requirements and protocols.
Requirements
Conditions of Employment
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Ability to obtain and maintain certification as an Apprentice in Value Management (AVM) granted by USACE within two years from entrance into this position.
- Must be able to obtain and maintain a Specialist in Value Management qualification granted by USACE, or a Certified Value Specialist certification per SAVE International within 5 years from entrance into this position.
- Ability to obtain and maintain a delegated legal authority (warrant) per USACE Value Program policy and guidance within 18 months of entering position.
- Ability to obtain and maintain a valid state driver's license required within 30 days of entrance into the position.
- Recruitment/Retention/Relocation Incentives MAY BE authorized.
- PCS/Moving Expenses MAY BE authorized.
Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
- Current Department of Army Civilian Employees
- Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
- Interagency Career Transition Assistance Plan
- Land Management Workforce Flexibility Act
- Military Spouses, under Executive Order (E.O.) 13473
- Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
- Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
- Priority Placement Program, DoD Retained Grade Preference Eligible
- Veterans Employment Opportunity Act (VEOA) of 1998
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for the Biologist 0401 Series:
A. Degree: Bachelor's degree (or higher degree) in biological sciences, agriculture, natural resource management, chemistry, or related disciplines appropriate to the position.
OR
B. Combination of Education and Experience: Courses equivalent to a major, as shown in A above, plus appropriate experience or additional education.
Basic Requirement for the General Engineering 0801 Series, Civil Engineering 0810 Series, Environmental Engineering 0819 Series, Mechanical Engineering 0830 Series and Electrical Engineering 0850 Series:
Please see education section below.
Basic Requirement for the Physical Scientist 1301 Series:
A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
OR
B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.
Basic Requirement for the Architect 0808 Series:
- Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
or
- Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:
- Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.
- Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Specialized Experience
GS-11: One year of specialized experience which includes meeting TWO of the following: 1) Monitor progress of engineering or architectural designs or other technical products to meet project objectives; 2) Provide input to project or program management plans; 3) Assess compliance with quality control/assurance regulations at the project or program level; 4) Assist in developing alternate approaches to achieve organizational goals; and/or 5) Apply SOPs and regulations in oversight of project or program. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Architecture.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
You will be evaluated on the basis of your level of competency in the following areas:
- Quality Management
- Technical Competence
- Written Communication
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.
Basic Requirement for the General Engineering 0801 Series, Civil Engineering 0810 Series, Environmental Engineering 0819 Series, Mechanical Engineering 0830 Series and Electrical Engineering 0850 Series:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
You may claim Military Spouse preference.
Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.
You may claim Priority Placement Program (PPP) preference.
DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.
Required Documents
The documents you are required to submit vary based on the authority you are using to apply (i.e., applying as a veteran, applying as a current permanent Federal employee, applying as a reinstatement, etc). Please review the following links to see which documents you need to provide to prove your eligibility to apply: Applicant Checklist for Internal/Merit Promotion Announcements.
As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
1. Your resume:
- Your resume may be submitted in any format and must support the specialized experience described in this announcement.
- If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
- For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application will be marked as incomplete and you will not receive consideration for this position.
- For additional information see: What to include in your resume.
2. Other supporting documents:
- Cover Letter, optional
- Most recent Performance Appraisal, if applicable
- Proof of Eligibility to Apply: Your application must include the documents which prove you are eligible to apply for the vacancy. The Proof of Eligibility document describes authorities commonly used in merit promotion recruitment and what document(s) are required to prove you meet the requirements of the authority. You must meet the requirements of at least one of the authorities listed in the Who May Apply section above to receive further consideration.
- Time-in-grade documentation: If you are applying for a higher grade and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old).
- This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses
NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section below.
The complete application package must be submitted by 11:59 PM (EST) on 07/12/2024 to receive consideration.
- To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application (https://apply.usastaffing.gov/ViewQuestionnaire/12460027).
- Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
- After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
- You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
- It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan.
- Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center.
To verify the status of your application, log into your USAJOBS account https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
|