Clarification from the agency

This Merit Promotion position is open to Current Federal Employees and Former Federal Employees with permanent status or reinstatement eligibility. Individuals who are eligible for a special appointing authority may also apply such as Individuals with Disabilities (Schedule A), former Peace Corps, AmeriCorps, and Vista volunteers; certain Military Spouses, or individuals eligible under various programs for Veterans (VRA, VEOA, 30% disabled).

The Supervisory General Engineer acts as the Contracting Officer's Technical Representative (COTR) providing technical and managerial facilities support for contractor, associate directors and directors. 

In this position, you will:

• Act as a senior construction representative with a broad base of technical expertise in construction, architectural, and engineering disciples.
• Provide oversight for complex, high profile projects and technical advice/assistance relative to the construction efforts of the branch and Smithsonian Facilities.
• Develops and implement computer applications for the project administration.
• Manage a field staff of two to eight on site professionals and technicians comprised of engineers, architects and computer and contract technicians.
• Develop policies, procedures, guidelines, contract specifications and changes, and technical reports.

Conditions of employment

• Pass Pre-employment Background Investigation
• May need to complete a Probationary Period
• Maintain a Bank Account for Direct Deposit/Electronic Transfer
• Males born after 12/31/59 must be registered with Selective Service.

Conditions of Employment

Qualification requirements, including one year time-in-grade at the next lower grade level for promotion candidates, must be met within 30 days of the job announcement closing date. See the 'Required Documents' section for additional information.

For information on qualification requirements, see Qualification Standards Handbook for General Schedule Positions viewable on OPM Website.

Qualifications

Basic Qualifications:

You must meet these Basic Education Requirements: (You must submit a copy of your transcript to show evidence of meeting this requirement in order to receive further consideration)

1. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

1. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
2. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
3. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional 1 For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org. 2 The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. 2 registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
4. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
5. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

In addition to the basic qualification requirement above:

Experience: You qualify for this position if you have one year of specialized experience equivalent to at least the GS-13 level in the Federal Service.  For this position, specialized experience is defined providing technical support for contractors; reviewing architectural or engineering documents for accuracy, completeness, and adherence to contract requirements and Federal regulations; coordinating on-site inspections during construction ensuring engineering systems are installed in compliance with contract plans and specifications; ensuring work meets quality standards according to Federal regulations; overall management of projects over $10M or more; leading a project team; communicating and collaborating with stakeholders with diverse backgrounds and priorities; and experience utilizing the Federal Acquisition Regulation. 

Your resume must be no more than two (2) pages and should clearly demonstrate how your experience aligns with the responsibilities and specialized experience required for this position. Do not copy language directly from the vacancy announcement, as you will be deemed ineligible for consideration. Instead, provide detailed, descriptive information about your actual experience.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Part-time and/or unpaid experience related to this position will be considered to determine the total number of years and months of experience. Be sure to note the number of paid or unpaid hours worked each week. 

Important Note:

Your resume and supporting documentation will be compared to your responses to the occupational questionnaire or other assessment tool for consistency. If a determination is made that you have rated yourself higher than is supported by your resume, you will be assigned a rating commensurate to your described experience. Your resume should provide sufficient information regarding how your education and experience relate to this position, including the major duties and qualifications criteria listed.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application will be evaluated first for the basic qualifications described above.  The applications that meet the basic qualifications will be evaluated further against the following criteria:

1. Ability to manage construction projects compromised of multidiscipline including architectural, electrical, structural and mechanical engineering.
2. Skill in the administration and management of construction contracts, providing on-site inspection, claims management and progress payment supervision.
3. Knowledge of applying computerized methodology for the compiling of data and analysis of construction project activates. 
4. Ability to lead, supervise and manage a diverse workforce of multi-discipline. 
5. Ability to communicate in writing to produce policies, procedures, guidelines, contract specifications and changes, and technical reports.  
6. Ability to communicate orally to negotiate, resolve conflicts, and represent Smithsonian interests in a variety of settings within and outside the Institution.

BASIS OF RATING:  Once the announcement closes, your application will be automatically evaluated and rated by the system and a Human Resources Specialist. To determine if you are qualified for this job, a review of your application and supporting documentation will be made and compared against your responses to the occupational questionnaire. The numeric rating you receive is based on your responses to the questionnaire. The score is a measure of the degree to which your background matches the knowledge, skills, and abilities required of this position. If, after the Human Resources Specialist reviews your resume and/or supporting documentation, a determination is made that the score you have received is not a true reflection of your qualifications and/or experience, your score can and will be adjusted to more accurately reflect the information you provided that support your abilities. Please follow all instructions carefully. Errors or omissions may affect your rating. Your resume should provide detailed information regarding how your education and experience relate to this position, including the major duties and qualifications criteria listed.

Veterans Employment Opportunities Act (VEOA):  If you are applying for a VEOA appointment, you must be a veteran and must be honorably separated and either a preference eligible or have substantially completed 3 or more years of active service. ("Active Service" under this law means active duty in a uniformed service and includes full-time training duty, annual training duty, full-time National Guard duty, and attendance, while in the active service, at a school designated as a service school by law or by the Secretary concerned.) A veteran who is released under honorable conditions shortly before completing a 3-year tour is also eligible.

Noncompetitive Appointment Authorities:  The following links contain information on the eligibility requirements to be considered under a noncompetitive appointing authority:

• Primary Appointing Authorities for Career and Career-Conditional Appointments
• Hiring Authorities for Veterans
• People with Disabilities

Your application package should include the following documents:

• Resume - Your resume can be uploaded and attached to your application or created using the USA Jobs on-line resume builder. Ensure your resume contains the job title (including the occupational series and grade if it is Federal), job-related qualifications, starting and ending dates (month and year), and hours worked per week, for each employment period. It is your responsibility to ensure all information is submitted. Failure to include this information may result in disqualification for the position.

  For assistance with creating a resume, please click USAJOBS Help Center - How do I write a resume for a federal job?
  

• Current and former employees MUST submit a copy of their Standard Form (SF)-50, “Notice of Personnel Action,” that indicates proof of status and time-in-grade eligibility. The SF-50 must include your position title, series, grade, step, salary, type of service (competitive or excepted in block 34), and tenure (1 or 2 in block 24). Please provide a SF-50 that shows the length of time you have been in your current/highest grade level.  Examples of appropriate SF50s include: Appointments, Reassignments, Within-grade/range increases or Promotion actions.  NOTE: Pay adjustments and award SF-50s do not include the length of time in your current position, therefore, they are NOT acceptable SF-50’s on their own. You may need to provide more than one SF-50. Failure to provide the appropriate SF-50(s) may prevent you from receiving consideration for this position.  

• Unofficial school transcripts, if the position has an education requirement or if you are using education to qualify. If selected for the position, you must provide an official transcript before appointment.
• Proof of U.S. accreditation for foreign study, if applicable.
• Proof of Veteran's Preference - DD214 (Member 4 Copy) if you are requesting a special appointment authority, such as VRA or VEOA
• Proof of severe disability if you are requesting special placement consideration.
• Proof of eligibility for a military spouse appointment, such as a permanent change station military order.
• Proof of eligibility for any other special appointing authority not specifically mentioned here.

Next steps