Supervisory General Engineer

Clarification from the agency

Open to IRS Career/Career-Conditional, Treasury/IRS CTAP & IRS RPP employees

General Manager Duties:

As a Front Line Manager you will:

• Plan work to be accomplished by subordinates, sets and adjusts short-term priorities and prepares schedules for completion of work.
• Assign work to subordinates based on priorities, selective consideration of the difficulty and requirements of assignments, and the capabilities of employees.
• Evaluate work performance of subordinates and makes recommendations for outstanding performance recognition and/or disciplinary action.
• Give advice, counsel or instruction to employees on work and administrative matters.
• Interview candidates for positions within the organization/unit and recommend appointment, promotion or reassignment to such positions.
• Hear and resolve complaints from employees, refer group grievances and/or more serious unresolved complaints as appropriate.
• Effect minor disciplinary measures, such as warnings and reprimands, recommend other actions in more serious cases.
• Identify developmental and training needs of employees, providing or arranging for needed development and training.
• Initiate ways to improve production, work processes and/or to increase the quality of the work directed.

• Provides leadership and oversight for national architecture and engineering programs supporting IRS facilities and critical infrastructure.
• Establishes technical priorities, engineering governance processes, maintains national program and managers, technical standards, quality assurance practices, and design review procedures to promote consistency, compliance, risk mitigation, and technical excellence across facilities programs.
• Directs the review and evaluation of engineering studies, facility assessments, design intent documents, technical analyses, construction drawings, specifications, technical evaluations, statements of work, government cost estimates, and other engineering products prepared by internal staff, contractors, and architectural and engineering firms.
• Reviews construction documents and specifications, conducts and oversees engineering site surveys. Ensures engineering activities comply with applicable Federal laws, regulations, building codes, industry standards, sustainability requirements, accessibility requirements, life-safety requirements, and IRS and Treasury policies.

Conditions of employment

Qualifications

Federal experience is not required. Experience may have been gained in the public sector, private sector or through Volunteer Service. One year of experience refers to full-time work; part-timework is considered on a prorated basis. To ensure full credit for your work experience, please indicate dates of employment by month/day/year, and indicate number of hours worked per week, on your resume.

You must meet the following requirements by the closing date of this announcement.

BASIC REQUIREMENTS (IOR): A degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
COMBINATION OF EDUCATION AND EXPERIENCE: A combination of education and experience that includes college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional
registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

AND

SPECIALIZED EXPERIENCE: In addition to meeting basic requirement, to be eligible for this position, you must have one (1) year of specialized experience at a level of difficulty and responsibility equivalent to the next lower level within the payband or GS grade in the normal line of progression in the Federal service that demonstrates the required managerial skills and technical competence required to perform the job. To be qualified for this position your experience must include:
Experience directing engineering governance, design oversight, and technical program activities supporting enterprise-wide architecture, engineering, facility modernization, infrastructure improvements, and building system upgrade initiatives.
Experience directing the review and evaluation of engineering studies, facility assessments, design intent documents, construction documents, technical analyses, technical specifications, Statements of Work, government cost estimates, engineering recommendations, and related engineering products supporting complex facilities and infrastructure projects.
Experience developing, implementing, and evaluating engineering standards, technical guidance, design review procedures, and quality assurance processes to support consistent execution of architecture and engineering programs and compliance with applicable engineering requirements.
Experience directing multidisciplinary engineering activities supporting facility modernization, repair and alteration projects, infrastructure improvements, engineering studies, project delivery, and lifecycle management of facilities and building systems.
Experience resolving complex engineering and architectural issues involving facility systems, infrastructure, engineering standards, regulatory requirements, technical risk, and project execution, and providing authoritative technical consultation to executive leadership, contractors, architectural and engineering firms, and Federal partners.
Experience ensuring engineering activities, technical products, and project deliverables comply with applicable Federal laws, regulations, building codes, Executive Orders, accessibility requirements, sustainability requirements, engineering standards, and agency policies while supporting nationwide facilities and infrastructure programs.

AND

You must also meet the following requirement(s):

• TIME AFTER COMPETITIVE APPOINTMENT (TACA): By the closing date (or if this is an open continuous announcement, by the cut-off date) specified in this job announcement, current civilian employees must have completed at least 90 days of federal civilian service since their latest non-temporary appointment from a competitive referral certificate, known as time after competitive appointment. For this requirement, a competitive appointment is one where you applied to and were appointed from an announcement open to "All US Citizens".

For more information on qualifications please refer to OPM's Qualifications Standards.
Go to Understanding the IRS Paybands for GS/IR conversion.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), your responses on the application questionnaire, and your responses to all assessments required for this position. Applicants who disqualify themselves will not be evaluated further.

You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

• Accountability
• Customer Service
• Decisiveness
• Flexibility
• Interpersonal Skills
• Problem Solving
• Resilience

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration.

Rating: Your application will be evaluated in accordance with the Service's Merit Promotion Plan. A quality group rating will be used to rank and select eligible candidates. If qualified, you will be assigned to one of three quality level groups, Superior/Best Qualified, Highly Qualified and Qualified.

Referral: Eligible applicants rated in the highest quality group, may be referred to a selecting official for consideration. Candidates, if required to participate in a selection interview (telephonic and/or in person at the discretion of the Selecting Official in accordance with hiring practices), will be interviewed in quality group order. We will not reimburse costs related to the interview such as travel to and from the interview site.

Performance Appraisal and Awards - Will not be used in determining your overall rating. Any performance appraisal/evaluation and award documentation you provide will be forwarded to the selecting official. The selecting official will review this documentation and give it due weight consideration during the overall selection process. IRS employees may obtain their most recent awards listing at https://persinfo.web.irs.gov/.

If you are a displaced or surplus Federal employee (eligible for the Career Transition Assistance Plan (CTAP), you must receive a rating of Highly Qualified orbetter to be rated as "well qualified" to receive special selection priority.

The following documents are required and must be provided with your application. All application materials, including transcripts, must be in English.
Incomplete or insufficient information may result in not being considered for the position or not receiving special consideration for which you may be eligible.
Please view Application Preparation or How to write a resume for federal job.

1. Resume
… Your resume should:

• Be limited to two (2) pages. Applicants with resumes exceeding two-pages will be removed from consideration. We recommend utilizing a standard 8.5x11-inch document size, a sans-serif font such as Arial or Calibri with a font size no smaller than 10-point for the main text, and page margins of 0.5 inches. Applicants that attempt to circumvent the 2-page limit page limit, for example by materially reducing readability, will be deemed ineligible. If you update your application, only the most recent resume received (uploaded under the "Resume" document type) will be considered to determine qualifications.
• Include your name and contact information.
• Include relevant work experience - Employer Name, Job Title, Employment dates (start to end date or present), number of hours worked per week, and a brief description of duties that clearly demonstrate your qualifications. To receive full credit for work experience, you must include specific MM/DD/YYYY start and end dates for every position.
• Include pay plan, series, and grade (e.g., GS-0301-09) for all federal service jobs.
• Not include photographs, classified or sensitive information, SSN, encrypted/digitally signed documents, or other inappropriate content. Resumes containing prohibited information will be deemed ineligible.
• Not include embedded links as they will not be opened or considered when determining qualifications.
• Not include personal information such as age, sex, religion, race, or disability.
• Not include specialized experience copied from the announcement or position description, as this is not a demonstration of your experience.

• For positions with an education requirement, or if you are qualifying for this position based on education or training, submit a copy of your transcript(s) or equivalent. An official transcript(s) will be required if you are selected.

• Submit the most recent completed annual performance appraisal.
• Submit copies of any incentive/performance awards received that may have an impact on the qualifications for the position to be filled.

• Review and submit the required documentation as outlined under CTAP

• Submit your RPP Notice and most recent performance appraisal.
• Appraisal must reflect Fully successful or higher overall rating.

• If applying for a higher grade and you met time-in-grade (TIG) at another agency, it is recommended that you provide an SF-50(s) (Notification of Personnel Action) (or equivalent) which demonstrates you meet the 52-week TIG requirement (e.g., Promotion with an effective date more than one (1) year old, Within-Grade-Increase at the highest grade held). Failure to provide an SF-50(s) that shows your eligibility may result in an ineligible determination.

Next steps

Additional locations