TRANSPORTATION SYSTEMS ENGINEER

Clarification from the agency

Open to all candidates who are:1. CTAP/ICTAP eligible in the local commuting area or Individuals, no matter where you reside, eligible for consideration under the Veterans Employment Opportunities Act.

The primary purpose of this position is to provide expert technical advice to the Chair, members of the Board, and staff of the U.S. Access Board with respect to national policies relating to issues of accessibility, specifically accessibility to public transportation.

As a TRANSPORTATION SYSTEMS ENGINEER, you will:

• Develop accessibility standards for air, water, and surface transportation systems;
• Draft proposed rules and evaluate public comments for revisions;
• Advise committees, agencies, engineers, and industry representatives on transportation accessibility;
• Provide training, technical assistance, and research supporting future policies and regulations;
• Review transportation system designs and recommend solution to accessibility barriers

Conditions of employment

Key Requirements:

• Must be U.S. Citizen or U.S. National
• A probationary or trial period may be required. Continued employment is contingent upon supervisory certification that continued employment will benefit the Federal Service; the certification will occur no less than 30 days before the end of the probationary/trial period
• Complete a probationary period of 260 days in pay status, which may not be completed in less than 1 year. (unless already completed).
• Must successfully complete a background investigation.
• Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency.
• Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer.
• If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so.
• Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form i-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S.
• File a Confidential Financial Disclosure Report within 30 days of appointment and annually from then on.
• You will be required to travel for this position.
• Only experience obtained by the closing date of this announcement will be considered.
• Bargaining Unit Position No
• Pre-employment physical required: No
• License required: No
• Complete the initial online assessment and USA Hire Assessment, if required

Qualifications

Applicants must demonstrate that they meet the Basic Requirements AND Specialized Experience requirements as noted below.

BASIC QUALIFICATION REQUIREMENTS:

General Engineering (0801 Series) Basic Requirement: You must meet one of the items listed below (A or B):

A. A degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must submit the applicable documentation to support your claim).

B. A combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must submit the applicable documentation to support your claim).

AND

Specialized Experience:

GS-14: Applicant must demonstrate one full year of specialized experience comparable in scope and responsibility to the GS-13 level in the Federal service (obtained in either the public or private sectors) performing the following duties:

1. Reviewing transportation systems, facilities, or vehicles for compliance with accessibility standards;
2. Developing or revising technical requirements for transportation accessibility regulations, standards, or guidelines; AND
3. Providing technical reports, briefings, training, papers, or testimony to internal or external stakeholders.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible. Limit your resume to two pages. Only resumes 2 pages in length will be accepted to determine eligibility and qualifications.

All qualification requirements must be met by the closing date of this announcement. Qualification claims will be subject to verification.

The experience may have been gained in either the public, private sector or volunteer service. One year of experience refers to full-time work; part-time work is considered on a prorated basis. To ensure full credit for your work experience, please indicate dates of employment by month/day/year, and indicate number of hours worked per week on your resume.

Interagency/Career Transition Assistance Program (ICTAP/CTAP): This program applies to Federal service employees whose positions have been deemed surplus or no longer needed, or employees who have been involuntarily separated from a Federal service position within the competitive service. To receive selection priority for this position, you must: 1) meet eligibility criteria for CTAP or ICTAP; 2) be rated well-qualified for the position; and 3) submit the appropriate documentation to support your CTAP or ICTAP eligibility. Well-Qualified includes those applicants whose knowledge, skills, and abilities clearly exceed the minimum qualification requirements for the position. For information on eligibility criteria and required documentation, go to: http://www.opm.gov/rif/employee_guides/career_transition.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), your responses on the application questionnaire, and your responses to all assessments required for this position.

Rating: Your application will be evaluated in the following areas: .

• Attention to Detail
• Customer Service
• Flexibility
• Influencing/Negotiating
• Integrity/Honesty
• Interpersonal Skills
• Learning
• Self- Management
• Stress Tolerance
• Teamwork
• Decision Making
• Reasoning

Your application will be rated and ranked among others, based on your responses to the online questions, regarding your experience, education, training, performance appraisals and awards relevant to the duties of this position. Your rating may be lowered if your responses to the online questions are not supported by the education and/or experience described in your application.

A complete application includes 1. A résumé, 2. Vacancy question responses, and 3. Submission of any required documents. Please note that if you do not provide all required information, as specified in this announcement, you may not be considered for this position (or may not receive the special consideration for which you may be eligible).

Please ensure all required documents, including any required work samples, narratives, or other materials as stated in this announcement, are attached to your application package

To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed.

All applicants are required to submit a résumé either by creating one in USAJOBS or uploading one of their own choosing. (Cover letters are optional.) Please limit your résumé to 2 pages. To receive full credit for relevant experience, please list the month/date/year and number of hours worked for experience listed on your résumé. We suggest that you preview the online questions, as you may need to customize your résumé to ensure that it supports your responses to these questions. Please view résumé tips.

CAREER TRANSITION ASSISTANCE PLAN (CTAP) OR INTERAGENCY CAREER TRANSITION ASSISTANCE PLAN (ICTAP) DOCUMENTATION:

• If you are a displaced or surplus Federal employee, submit the documents applicable to you:
  • A copy of the documentation demonstrating your status as a surplus or displaced employee (See OPM's Career Transition Guide for additional information regarding these statuses);
  • A copy of your SF-50 "Notification of Personnel Action," noting your position, grade level, and duty location. If you have already separated, submit a copy of your SF-50 documenting your separation;
  • A copy of your latest performance appraisal including your rating (if your separation notice does not have this information included); and
  • Any documentation from your agency that shows your current promotion potential.

• Position title;
• Type of appointment (Schedule A, Schedule C, Non-career SES, or Presidential Appointee);
• Agency; and
• Beginning and ending dates of appointment

Next steps